svcadm(1M)을 검색하려면 섹션에서 1M 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
krb5envvar(7)
Standards, Environments, and Macros krb5envvar(7)
NAME
krb5envvar - Kerberos environment variables
DESCRIPTION
The Kerberos mechanism provides a number of environment variables to
configure different behavior in order to meet applications' needs.
Environment variables used within the Kerberos mechanism are:
KRB5_KTNAME
Used by the mechanism to specify the location of the key table
file. The variable can be set to the following value:
[[<kt type>:]<file name>]
where <kt type> can be FILE or WRFILE. FILE is for read operations;
WRFILE is for write operations. <file name> is the location of the
keytab file.
If KRB5_KTNAME is not defined, the default value is:
FILE:/etc/krb5/krb5.keytab
The keytab file is used to store credentials persistently and is
used commonly for service daemons.
Specifying the FILE type assumes that the subsequent operations on
the associated file are readable by the invoking process. Care must
be taken to ensure that the file is readable only by the set of
principals that need to retrieve their unencrypted keys.
The WRFILE type is used by the kadmin(1) command. Specifying this
type allows the administrator to designate an alternate keytab file
to write to without using extra command line arguments for file
location.
KRB5CCNAME
Used by the mechanism to specify the location of the credential
cache. The variable can be set to the following value:
[[<cc type>:]<file name>]
where <cc type> can be FILE or MEMORY. <file name> is the location
of the principal's credential cache.
If KRB5CCNAME is not defined, the default value is:
FILE:/tmp/volatile-user/<uid>/krb5cc_<uid>
where <uid> is the user id of the process that created the cache
file.
The credential cache file is used to store tickets that have been
granted to the principal.
Specifying the FILE types assumes that subsequent operations on the
associated file are readable and writable by the invoking process.
Care must be taken to ensure that the file is accessible only by
the set of principals that need to access their credentials. If the
credential file is in a directory to which other users have write
access, you need to set that directory's sticky bit (see chmod(1)).
The MEMORY credential cache type is used only in special cases,
such as when making a temporary cache for the life of the invoking
process.
KRB5RCNAME
Used by the mechanism to specify the type and location of the
replay cache. The variable can be set to the following value:
[[<rc type>:]<file name>]
where <rc type> can be either FILE, MEMORY, or NONE. <file name> is
relevant only when specifying the replay cache file type.
If not defined, the default value is:
FILE:/var/krb5/rcache/root/rc_<service>
...if the process is owned by root, or:
FILE:/var/krb5/rcache/rc_<service>
...if the process is owned by a user other than root. <service> is
the service process name associated with the replay cache file.
The replay cache is used by Kerberos to detect the replay of
authentication data. This prevents people who capture authentica‐
tion messages on the network from authenticating to the server by
resending these messages.
When specifying the FILE replay cache type, care must be taken to
prevent the replay cache file from being deleted by another user.
Make sure that every directory in the replay cache path is either
writable only by the owner of the replay cache or that the sticky
bit ("t") is set on every directory in the replay cache path to
which others have write permission.
When specifying the MEMORY replay cache type you need to weigh the
trade-off of performance against the slight security risk created
by using a non-persistent cache. The risk occurs during system
reboots when the following condition obtains:
o The duration from the last write to the replay cache
before reboot to the point when the Kerberized server
applications are running is less than the Kerberos
clockskew (see krb5.conf(5)).
When specifying the NONE replay cache time you need to understand
that this disables the replay cache, and all security risks that
this presents. This includes all the risks outlined in this section
of the man page.
Under this condition, the server applications can accept a replay
of Kerberos authentication data (up to the difference between the
time of the last write and the clockskew). Typically, this is a
small window of time. If the server applications take longer than
the clockskew to start accepting connections there is no replay
risk.
The risk described above is the same when using FILE replay cache
types when the replay cache resides on swap file systems, such as
/tmp and /var/run.
The performance improvement in MEMORY replay cache types over FILE
types is derived from the absence of disk I/O. This is true even if
the FILE replay cache is on a memory-backed file system, such as
swap (/tmp and /var/run).
Note that MEMORY-type caches are per-process caches, therefore use
of these types of caches must be carefully considered. One example
of where MEMORY-type caches can be problematic is when an applica‐
tion uses more than one process for establishing security con‐
texts. In such a case, memory replay caches are not shared across
the processes, thus allowing potential for replay attacks.
KRB5_CONFIG
Allows the Kerberos library to read configuration parameters from a
file other than /etc/krb5/krb5.conf. To use kinit from ksh(1), use
the following example:
KRB5_CONFIG=/var/tmp/krb5.conf kinit
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
box; cbp-1 | cbp-1 l | l . ATTRIBUTE TYPE ATTRIBUTE VALUE = Availabil‐
ity security/kerberos-5 = Stability Pass-through uncommitted
SEE ALSO
chmod(1), kadmin(1), kinit(1), klist(1), ksh(1), krb5.conf(5),
attributes(7), kerberos(7), kadmind(8)
NOTES
Source code for open source software components in Oracle Solaris can
be found at https://www.oracle.com/downloads/opensource/solaris-source-
code-downloads.html.
This software was built from source available at
https://github.com/oracle/solaris-userland. The original community
source was downloaded from http://web.mit.edu/ker‐
beros/dist/krb5/1.18/krb5-1.18.4.tar.gz.
Further information about this software can be found on the open source
community website at http://web.mit.edu/kerberos/.
Solaris 11.4 21 Jun 2021 krb5envvar(7)