svcadm(1M)을 검색하려면 섹션에서 1M 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
vfstab(5)
vfstab(5) File Formats vfstab(5)
NAME
vfstab - table of file system defaults
DESCRIPTION
The file /etc/vfstab describes defaults for each file system. The
information is stored in a table with the following column headings:
device device mount FS fsck mount mount
to mount to fsck point type pass at boot options
The fields in the table are space-separated and show the resource name
(device to mount), the raw device to fsck (device to fsck), the default
mount directory (mount point), the name of the file system type (FS
type), the number used by fsck to decide whether to check the file sys‐
tem automatically (fsck pass), whether the file system should be
mounted automatically by mountall (mount at boot), and the file system
mount options (mount options). (See respective mount file system man
page below in SEE ALSO for mount options.) A '-' is used to indicate no
entry in a field. This can be used when a field does not apply to the
resource being mounted.
The getvfsent(3C) family of routines is used to read and write to
/etc/vfstab.
/etc/vfstab can be used to specify swap areas. An entry so specified,
(which can be a file or a device), automatically is added as a swap
area by the /usr/sbin/swapadd script when the system boots. To specify
a swap area, the device-to-mount field contains the name of the swap
file or device, the FS-type is swap, mount-at-boot is no and all other
fields have no entry. All swap devices are encrypted. For a ZFS volume,
encryption is always enabled, whether the volume has ZFS encryption
property (see zfs_encrypt(8)) or not; for a raw device, encryption is
enabled by means of lofi(4D). Any unrecognised mount options for swap
areas are ignored.
iSCSI LUN can only be mounted after the iSCSI initiator SMF service,
svc:/network/iscsi/initiator, is started. Set the mount at boot entries
for iSCSI LUN in /etc/vfstab to iscsi instead of yes. This enables the
iSCSI initiator SMF service to attempt to mount iSCSI LUN later.
EXAMPLES
The following are vfstab entries for various file system types sup‐
ported in the Solaris operating system.
Example 1 NFS and UFS Mounts
The following entry invokes NFS to automatically mount the directory
/usr/local of the server example1 on the client's /usr/local directory
with read-only permission:
example1:/usr/local - /usr/local nfs - yes ro
The following example assumes a small departmental mail setup, in which
clients mount /var/mail from a server mailsvr. The following entry
would be listed in each client's vfstab:
mailsvr:/var/mail - /var/mail nfs - yes intr,bg
The following is an example for a UFS file system in which logging is
enabled:
/dev/dsk/c2t10d0s0 /dev/rdsk/c2t10d0s0 /export/local ufs 3 yes logging
See mount_nfs(8) for a description of NFS mount options and
mount_ufs(8) for a description of UFS options.
Example 2 pcfs Mounts
The following example mounts a pcfs file system on a fixed hard disk on
an x86 machine:
/dev/dsk/c1t2d0p0:c - /win98 pcfs - yes -
The example below mounts a Jaz drive on a SPARC machine. Normally, the
volume management software handles mounting of removable media, obviat‐
ing a vfstab entry. Specifying a device that supports removable media
in vfstab with set the mount-at-boot field to no (as shown below) dis‐
ables the automatic handling of that device. Such an entry presumes you
are not running volume management software.
/dev/dsk/c1t2d0s2:c - /jaz pcfs - no -
For removable media on a SPARC machine, the convention for the slice
portion of the disk identifier is to specify s2, which stands for the
entire medium.
For pcfs file systems on x86 machines, note that the disk identifier
uses a p (p0) and a logical drive (c, in the /win98 example above) for
a pcfs logical drive. See mount_pcfs(8) for syntax for pcfs logical
drives and for pcfs-specific mount options.
Example 3 Loopback File System Mount
The following is an example of mounting a loopback (lofs) file system:
/export/test - /opt/test lofs - yes -
See lofs(4FS) for an overview of the loopback file system.
SEE ALSO
getvfsent(3C), lofi(4D), fsck(8), mount(8), mount_hsfs(8),
mount_nfs(8), mount_tmpfs(8), mount_ufs(8), swap(8), zfs(8),
zfs_encrypt(8)
Oracle Solaris 11.4 11 Dec 2020 vfstab(5)