svcadm(1M)을 검색하려면 섹션에서 1M 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
pam.conf(5)
pam.conf(5) File Formats pam.conf(5)
NAME
pam.conf, pam.d - configuration file for pluggable authentication mod‐
ules
SYNOPSIS
/etc/pam.conf
/etc/pam.d/service
DESCRIPTION
pam.conf is the traditional configuration file for the Pluggable
Authentication Module architecture, or PAM. Per-service policy files in
/etc/pam.d/ provide an alternate and preferred configuration mechanism
for PAM.
The PAM library (libpam(3LIB)) looks for the PAM configuration in the
following files in the order listed:
1. /etc/pam.conf for the current PAM service name
2. /etc/pam.d/service for the current PAM service name
3. /etc/pam.conf for the PAM service name of "other"
4. /etc/pam.d/other
A PAM module provides functionality for one or more of four possible
services: authentication, account management, session management, and
password management.
authentication service module
Provides functionality to authenticate a user and set up user cre‐
dentials.
account management module
Provides functionality to determine if the current user's account
is valid. This includes checking for password and account expira‐
tion, as well as verifying access hour restrictions.
session management module
Provides functionality to set up and terminate login sessions.
password management module
Provides functionality to change a user's authentication token or
password.
Each of the four service modules can be implemented as a shared library
object which can be referenced in the pam.conf configuration file or a
per-service PAM configuration file in /etc/pam.d/.
PAM Configuration File Syntax
The pam.conf file contains a listing of services. Each service is
paired with a corresponding service module. When a service is
requested, its associated module is invoked. Each entry may be a maxi‐
mum of 256 characters, including the end of line, and must be one of
the following two formats:
service_name module_type control_flag module_path options
service_name module_type include path-to-included-PAM-configuration
The per-service policy files in /etc/pam.d/ have almost the same syntax
as pam.conf; however they contain only four fields rather than the five
in pam.conf: the service_name field is not present. The service_name is
instead taken from the name of the policy file in /etc/pam.d/. The two
allowed formats for entries in the per-service policy files are:
module_type control_flag module_path options
module_type include path-to-included-PAM-configuration
The PAM configuration file included using the include mechanism can be
in any of the four formats listed above.
In both types of PAM policy files blank lines and lines beginning with
a '#' sign are ignored.
The following is an example of a pam.conf configuration file with sup‐
port for authentication, account management, session management and
password management modules:
login auth requisite pam_authtok_get.so.1
login auth required pam_unix_auth.so.1
other account requisite pam_roles.so.1
other account required pam_unix_account.so.1
other session required pam_unix_session.so.1
other password requisite pam_authtok_get.so.1
other password requisite pam_authtok_check.so.1
other password required pam_authtok_store.so.1
The equivalent PAM configuration in /etc/pam.d/ would be the following
entries in /etc/pam.d/login:
auth requisite pam_authtok_get.so.1
auth required pam_unix_auth.so.1
and the following entries in /etc/pam.d/other:
account requisite pam_roles.so.1
account required pam_unix_account.so.1
session required pam_unix_session.so.1
password requisite pam_authtok_get.so.1
password requisite pam_authtok_check.so.1
password required pam_authtok_store.so.1
service_name denotes the service (for example, login, gdm, or rlogin).
The keyword, "other," indicates the module that all other applications
which have not been specified should use. The "other" keyword can also
be used if all services of the same module_type have the same require‐
ments.
module_type denotes the service module type: authentication (auth),
account management (account), session management (session), or password
management (password).
The control_flag field determines the behavior of stacking.
The module_path field specifies the relative pathname to a shared
library object, or an included PAM configuration file, which implements
the service functionality. If the pathname is not absolute, shared
library objects are assumed to be relative to /usr/lib/security/$ISA/,
and included PAM configuration files are assumed to be relative to
/usr/lib/security/.
The ISA token is replaced by an implementation defined directory name
which defines the path relative to the calling program's instruction
set architecture.
The options field is used by the PAM framework layer to pass module
specific options to the modules. It is up to the module to parse and
interpret the options.
This field can be used by the modules to turn on debugging or to pass
any module specific parameters such as a TIMEOUT value. The options
supported by the modules are documented in their respective manual
pages.
Integrating Multiple Authentication Services With Stacking
When a service_name of the same module_type is defined more than once,
the service is said to be stacked. Each module referenced in the mod‐
ule_path for that service is then processed in the order that it occurs
in the configuration file. The control_flag field specifies the contin‐
uation and failure semantics of the modules, and can contain one of the
following values:
binding
If the service module returns success and no preceding required
modules returned failures, immediately return success without call‐
ing any subsequent modules. If a failure is returned, treat the
failure as a required module failure, and continue to process the
PAM stack.
definitive
If the service module returns success and no preceding required
modules return failures, immediately return success without calling
any subsequent modules. If a failure is returned, immediately
return the first non-optional failure value recorded without call‐
ing any subsequent modules. That is, return this failure unless a
previous required service module failed. If a previous required
service module failed, then return the first of those values.
include
Process the lines from the PAM configuration file that is specified
in the module_path at this point in the PAM stack. The "other" key‐
word is used if the specified service_name is not found. 32 levels
of included PAM configuration files are supported. Any options are
ignored.
optional
If the service module returns success, record the success, and con‐
tinue to process the PAM stack. If a failure is returned, and it is
the first optional module failure, save the failure code as an
optional failure. Continue to process the PAM stack.
required
If the service module returns success, record the success, and con‐
tinue to process the PAM stack. If a failure is returned, and it is
the first required failure, save the failure code as a required
failure. Continue to process the PAM stack.
requisite
If the service module returns success, record the success, and con‐
tinue to process the PAM stack. If a failure is returned, immedi‐
ately return the first non-optional failure value recorded without
calling any subsequent modules. That is, return this failure unless
a previous required service module failed. If a previous required
service module failed, then returns the first of those values.
sufficient
If the service module return success and no preceding required mod‐
ules returned failures, immediately return success without calling
any subsequent modules. If a failure is returned, treat the failure
as an optional module failure, and continue to process the PAM
stack.
Stacked PAM services results are returned as follows:
o If a requisite, binding, sufficient, or definitive module
causes processing to complete early, that result is
returned.
o Otherwise, if a required module fails, the first such fail‐
ure is returned.
o Otherwise, if any module succeeds, success is returned.
o Otherwise, if an optional module fails, the first such fail‐
ure is returned.
o Otherwise, a default error based on module type is returned.
All errors in pam.conf entries or the per-service policy files in
/etc/pam.d/ are logged to syslog as LOG_AUTH | LOG_ERR errors. The use
of a service with an error noted in the pam.conf entry for that service
will fail. The system administrator will need to correct any noted
errors before the configured PAM configuration may be used. If no
applicable services are found in the pam.conf file or the per-service
/etc/pam.d/ files, the system administrator may enter system mainte‐
nance mode to correct or restore the PAM configuration.
The following is a sample configuration file that stacks the su, login,
and rlogin services.
su auth required pam_inhouse.so.1
su auth requisite pam_authtok_get.so.1
su auth required pam_unix_auth.so.1
login auth requisite pam_authtok_get.so.1
login auth required pam_unix_auth.so.1
login auth optional pam_inhouse.so.1
rlogin auth sufficient pam_rhosts_auth.so.1
rlogin auth requisite pam_authtok_get.so.1
rlogin auth required pam_unix_auth.so.1
The equivalent PAM configuration in /etc/pam.d/ would be the following
entries in /etc/pam.d/su:
auth required pam_inhouse.so.1
auth requisite pam_authtok_get.so.1
auth required pam_unix_auth.so.1
the following entries in /etc/pam.d/login:
auth requisite pam_authtok_get.so.1
auth required pam_unix_auth.so.1
auth optional pam_inhouse.so.1
and the following entries in /etc/pam.d/rlogin:
auth sufficient pam_rhosts_auth.so.1
auth requisite pam_authtok_get.so.1
auth required pam_unix_auth.so.1
In the case of su, the user is authenticated by the inhouse and auth‐
tok_get, dhkeys, and unix_auth authentication modules. Because the
inhouse and the other authentication modules are required and requi‐
site, respectively, an error is returned back to the application if any
module fails. In addition, if the requisite authentication (pam_auth‐
tok_get authentication) fails, the other authentication modules are
never invoked, and the error is returned immediately back to the appli‐
cation.
In the case of login, the required keyword for control_flag requires
that the user be allowed to login only if the user is authenticated by
all the service modules. If pam_unix_auth authentication fails, control
continues to proceed down the stack, and the inhouse authentication
module is invoked. inhouse authentication is optional by virtue of the
optional keyword in the control_flag field. The user can still log in
even if inhouse authentication fails, assuming the modules stacked
above succeeded.
In the case of rlogin, the sufficient keyword for control_flag speci‐
fies that if the rhosts authentication check succeeds, then PAM should
return success to rlogin and rlogin should not prompt the user for a
password. The other authentication modules, which are in the stack,
will only be invoked if the rhosts check fails. This gives the system
administrator the flexibility to determine if rhosts alone is suffi‐
cient enough to authenticate a remote user.
Some modules return PAM_IGNORE in certain situations. In these cases
the PAM framework ignores the entire entry in pam.conf regardless of
whether or not it is binding, definitive, requisite, required,
optional, or sufficient.
Utilities and Files
The specific service names and module types for each service should be
documented in the man page for that service. For instance, the sshd(8)
man page lists all of the PAM service names and module types for the
sshd command.
The PAM configuration file does not dictate either the name or the
location of the service specific modules. The convention, however, is
the following:
pam_module_name.so.x File that implements various function of
specific authentication services. As the
relative pathname specified,
/usr/lib/security/$ISA is prepended to it.
/etc/pam.conf Traditional PAM configuration file
/etc/pam.d/service Alternate PAM configuration files
/usr/lib/$ISA/libpam.so.1 File that implements the PAM framework
library
EXAMPLES
Example 1 Using the include control flag
The following example collects the common UNIX modules into a single
file to be included as needed in the example of a pam.conf file. The
common UNIX module file is named unix_common and consists of:
OTHER auth requisite pam_authtok_get.so.1
OTHER auth required pam_dhkeys.so.1
OTHER auth required pam_unix_auth.so.1
OTHER auth required pam_unix_cred.so.1
OTHER account requisite pam_roles.so.1
OTHER account required pam_unix_account.so.1
OTHER session required pam_unix_session.so.1
OTHER password required pam_dhkeys.so.1
OTHER password requisite pam_authtok_get.so.1
OTHER password requisite pam_authtok_check.so.1
OTHER password required pam_authtok_store.so.1
The pam.conf file consists of:
# Authentication management
#
# login service
#
login auth include unix_common
#
# rlogin service (explicit because of pam_rhost_auth)
#
rlogin auth sufficient pam_rhosts_auth.so.1
rlogin auth include unix_common
#
# Default definitions for Authentication management
# Used when service name is not explicitly mentioned
#
OTHER auth include unix_common
#
# Default definition for Account management
# Used when service name is not explicitly mentioned
#
OTHER account include unix_common
#
# Default definition for Session management
# Used when service name is not explicitly mentioned
#
OTHER session include unix_common
#
# Default definition for Password management
# Used when service name is not explicitly mentioned
#
OTHER password include unix_common
The equivalent PAM configuration in /etc/pam.d/ would be the following
entries in /etc/pam.d/login:
# Authentication management
#
# login service
#
auth include unix_common
the following entries in /etc/pam.d/rlogin:
#
# rlogin service (explicit because of pam_rhost_auth)
#
auth sufficient pam_rhosts_auth.so.1
auth include unix_common
and the following entries in /etc/pam.d/OTHER:
#
# Default definitions for Authentication management
# Used when service name is not explicitly mentioned
#
auth include unix_common
#
# Default definition for Account management
# Used when service name is not explicitly mentioned
#
account include unix_common
#
# Default definition for Session management
# Used when service name is not explicitly mentioned
#
session include unix_common
#
# Default definition for Password management
# Used when service name is not explicitly mentioned
#
password include unix_common
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE TYPEAT‐
TRIBUTE VALUE _ AvailabilitySee below. _ Interface StabilitySee below.
Availability
/etc/pam.conf is delivered in the system/core-os package.
/etc/pam.d/ files are delivered in the packages that provide the mod‐
ules or software they are associated with.
Interface Stability
The format is Committed. The contents have no stability attributes.
SEE ALSO
login(1), passwd(1), syslog(3C), libpam(3LIB), pam(3PAM),
attributes(7), environ(7), pam_authtok_check(7), pam_authtok_get(7),
pam_authtok_store(7), pam_dhkeys(7), pam_krb5(7), pam_passwd_auth(7),
pam_unix_account(7), pam_unix_auth(7), pam_unix_session(7),
in.rlogind(8), in.rshd(8), in.telnetd(8), init(8), su(8), ttymon(8)
Chapter 1, Using Pluggable Authentication Modules in Managing Authenti‐
cation in Oracle Solaris 11.4
HISTORY
Support for pam.d was added in Oracle Solaris 11.1.0.
Support for pam.conf was added in Solaris 2.6.
Oracle Solaris 11.4 21 Jun 2021 pam.conf(5)