svcadm(1M)을 검색하려면 섹션에서 1M 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
ipnet(4d)
Device Drivers & /dev files ipnet(4D)
NAME
ipnet, lo0 - ipnet device driver
SYNOPSIS
/dev/ipnet/*, /dev/lo0
DESCRIPTION
The ipnet device driver creates, removes and manages nodes in the
/dev/ipnet/ namespace.
A node is created in /dev/ipnet for every IP interface on the system,
including interfaces that exist only in software and for which there is
no hardware device. The ipnet device also provides access to all IP
traffic to and from the system. To provide access to packets that are
internally looped-back in IP, the ipnet driver creates a /dev/lo0 DLPI
device.
APPLICATION PROGRAMMING INTERFACE
ipnet and DLPI
Device nodes created in /dev/ipnet are DLPI style-1 devices. All
M_PROTO and M_PCPROTO-type messages are interpreted as DLPI primitives.
Because the device is read-only and packets can only be observed by
opening them, the following subset of DLPI primitives is supported:
DL_INFO_REQ
DL_BIND_REQ
DL_UNBIND_REQ
DL_PROMISCON_REQ
DL_PROMISCOFF_REQ
DLIOCRAW
The values returned by the driver in the DL_INFO_ACK primitive in
response to the DL_INFO_REQ are:
o Maximum SDU is INT_MAX
o Minimum SDU is 0.
o DLSAP address length is 2.
o MAC type is DL_IPNET.
o SAP length value is 2.
o Service mode is DL_CLDLS.
o No optional quality of service (QOS) support is provided.
Accordingly, the QOS fields are 0.
o Provider style is DL_STYLE1.
o Version is DL_VERSION_2.
The /dev/ipnet/* and /dev/lo0 devices only accept DL_BIND_REQ requests
for SAPs 4 (IPv4 packets), 6 (IPv6 packets), or 0 (all IP packets).
DL_BIND_REQ requests for other SAP values result in a DL_ERROR_ACK of
DL_BADSAP.
ipnet Primitives
For /dev/ipnet/* devices, the DL_PROMISCON_REQ and DL_PROMISCOFF_REQ
primitives with the DL_PROMISC_PHYS flag set in the dl_level field
enables/disables the reception of all packets. When disabled, only
packets with addresses matching any of the configured addresses on the
IP interface are received. When used with the DL_PROMISC_MULTI flag
set, reception of all multicast group addresses can be enabled/dis‐
abled. DL_PROMISC_PHYS and DL_PROMISC_MULTI have no effect for
/dev/lo0. When the DL_PROMISC_SAP flag is set, reception of all IPv4
and IPv6 can be enabled/disabled.
The DLIOCRAW ioctl is supported but has no effect on the data returned
from the device.
The DL_IOC_IPNET_INFO ioctl enables/disables the inclusion of a
dl_ipnetinfo_t structure that is prepended to the IP header when
receiving packet data. When enabled, a non-zero integer is returned
reflecting the current DL_IOC_IPNET_INFO version. The dl_ipnetinfo_t
data structure is defined in <sys/dlpi.h> and includes the following
fields:
uint8_t dli_version; /* DL_IPNETINFO_* version */
uint8_t dli_family; /* packet IP header version */
uint16_t dli_htype;
uint32_t dli_pktlen; /* length of dl_ipnetinfo_t */
uint32_t dli_ifindex;
uint32_t dli_grifindex;
uint32_t dli_zsrc; /* packet source zone ID (if any) */
uint32_t dli_zdst; /* packet dest zone ID (if any) */
The current dli_version is 1. To robustly support future dl_ipnetinfo_t
versions, consumers should check that dli_version is a value they rec‐
ognize, and must use the dli_len field to advance past the dl_ipnet‐
info_t header.
FILES
/dev/ipnet/*, /dev/lo0 Special character devices
/kernel/drv/ipnet.conf Configuration file
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE TYPEAT‐
TRIBUTE VALUE _ Availabilitysystem/kernel _ ArchitectureSPARC, x86 _
Interface StabilityCommitted
SEE ALSO
dlpi(4P), attributes(7)
Oracle Solaris 11.4 15 Mar 2011 ipnet(4D)