svcadm(1M)을 검색하려면 섹션에서 1M 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
malloc_info(3)
MALLOC_INFO(3) Linux Programmer's Manual MALLOC_INFO(3)
NAME
malloc_info - export malloc state to a stream
SYNOPSIS
#include <malloc.h>
int malloc_info(int options, FILE *stream);
DESCRIPTION
The malloc_info() function exports an XML string that describes the
current state of the memory-allocation implementation in the caller.
The string is printed on the file stream stream. The exported string
includes information about all arenas (see malloc(3)).
As currently implemented, options must be zero.
RETURN VALUE
On success, malloc_info() returns 0; on error, it returns -1, with
errno set to indicate the cause.
ERRORS
EINVAL options was nonzero.
VERSIONS
malloc_info() was added to glibc in version 2.10.
ATTRIBUTES
For an explanation of the terms used in this section, see
attributes(7).
allbox; lb lb lb l l l. Interface Attribute Value T{ malloc_info()
T} Thread safety MT-Safe
CONFORMING TO
This function is a GNU extension.
NOTES
The memory-allocation information is provided as an XML string (rather
than a C structure) because the information may change over time
(according to changes in the underlying implementation). The output
XML string includes a version field.
The open_memstream(3) function can be used to send the output of mal‐
loc_info() directly into a buffer in memory, rather than to a file.
The malloc_info() function is designed to address deficiencies in mal‐
loc_stats(3) and mallinfo(3).
EXAMPLE
The program below takes up to four command-line arguments, of which the
first three are mandatory. The first argument specifies the number of
threads that the program should create. All of the threads, including
the main thread, allocate the number of blocks of memory specified by
the second argument. The third argument controls the size of the
blocks to be allocated. The main thread creates blocks of this size,
the second thread created by the program allocates blocks of twice this
size, the third thread allocates blocks of three times this size, and
so on.
The program calls malloc_info() twice to display the memory-allocation
state. The first call takes place before any threads are created or
memory allocated. The second call is performed after all threads have
allocated memory.
In the following example, the command-line arguments specify the cre‐
ation of one additional thread, and both the main thread and the addi‐
tional thread allocate 10000 blocks of memory. After the blocks of
memory have been allocated, malloc_info() shows the state of two allo‐
cation arenas.
$ getconf GNU_LIBC_VERSION
glibc 2.13
$ ./a.out 1 10000 100
============ Before allocating blocks ============
<malloc version="1">
<heap nr="0">
<sizes>
</sizes>
<total type="fast" count="0" size="0"/>
<total type="rest" count="0" size="0"/>
<system type="current" size="135168"/>
<system type="max" size="135168"/>
<aspace type="total" size="135168"/>
<aspace type="mprotect" size="135168"/>
</heap>
<total type="fast" count="0" size="0"/>
<total type="rest" count="0" size="0"/>
<system type="current" size="135168"/>
<system type="max" size="135168"/>
<aspace type="total" size="135168"/>
<aspace type="mprotect" size="135168"/>
</malloc>
============ After allocating blocks ============
<malloc version="1">
<heap nr="0">
<sizes>
</sizes>
<total type="fast" count="0" size="0"/>
<total type="rest" count="0" size="0"/>
<system type="current" size="1081344"/>
<system type="max" size="1081344"/>
<aspace type="total" size="1081344"/>
<aspace type="mprotect" size="1081344"/>
</heap>
<heap nr="1">
<sizes>
</sizes>
<total type="fast" count="0" size="0"/>
<total type="rest" count="0" size="0"/>
<system type="current" size="1032192"/>
<system type="max" size="1032192"/>
<aspace type="total" size="1032192"/>
<aspace type="mprotect" size="1032192"/>
</heap>
<total type="fast" count="0" size="0"/>
<total type="rest" count="0" size="0"/>
<system type="current" size="2113536"/>
<system type="max" size="2113536"/>
<aspace type="total" size="2113536"/>
<aspace type="mprotect" size="2113536"/>
</malloc>
Program source
#include <unistd.h>
#include <stdlib.h>
#include <pthread.h>
#include <malloc.h>
#include <errno.h>
static size_t blockSize;
static int numThreads, numBlocks;
#define errExit(msg) do { perror(msg); exit(EXIT_FAILURE); \
} while (0)
static void *
thread_func(void *arg)
{
int j;
int tn = (int) arg;
/* The multiplier '(2 + tn)' ensures that each thread (including
the main thread) allocates a different amount of memory */
for (j = 0; j < numBlocks; j++)
if (malloc(blockSize * (2 + tn)) == NULL)
errExit("malloc-thread");
sleep(100); /* Sleep until main thread terminates */
return NULL;
}
int
main(int argc, char *argv[])
{
int j, tn, sleepTime;
pthread_t *thr;
if (argc < 4) {
fprintf(stderr,
"%s num-threads num-blocks block-size [sleep-time]\n",
argv[0]);
exit(EXIT_FAILURE);
}
numThreads = atoi(argv[1]);
numBlocks = atoi(argv[2]);
blockSize = atoi(argv[3]);
sleepTime = (argc > 4) ? atoi(argv[4]) : 0;
thr = calloc(numThreads, sizeof(pthread_t));
if (thr == NULL)
errExit("calloc");
printf("============ Before allocating blocks ============\n");
malloc_info(0, stdout);
/* Create threads that allocate different amounts of memory */
for (tn = 0; tn < numThreads; tn++) {
errno = pthread_create(&thr[tn], NULL, thread_func,
(void *) tn);
if (errno != 0)
errExit("pthread_create");
/* If we add a sleep interval after the start-up of each
thread, the threads likely won't contend for malloc
mutexes, and therefore additional arenas won't be
allocated (see malloc(3)). */
if (sleepTime > 0)
sleep(sleepTime);
}
/* The main thread also allocates some memory */
for (j = 0; j < numBlocks; j++)
if (malloc(blockSize) == NULL)
errExit("malloc");
sleep(2); /* Give all threads a chance to
complete allocations */
printf("\n============ After allocating blocks ============\n");
malloc_info(0, stdout);
exit(EXIT_SUCCESS);
}
SEE ALSO
mallinfo(3), malloc(3), malloc_stats(3), mallopt(3), open_memstream(3)
COLOPHON
This page is part of release 5.02 of the Linux man-pages project. A
description of the project, information about reporting bugs, and the
latest version of this page, can be found at
https://www.kernel.org/doc/man-pages/.
GNU 2019-03-06 MALLOC_INFO(3)