svcadm(1M)을 검색하려면 섹션에서 1M 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
uadmin(2)
uadmin(2) System Calls uadmin(2)
NAME
uadmin - administrative control
SYNOPSIS
#include <sys/uadmin.h>
int uadmin(int cmd, int fcn, uintptr_t mdep);
DESCRIPTION
The uadmin() function provides control for basic administrative func‐
tions. This function is tightly coupled to the system administrative
procedures and is not intended for general use. The argument mdep is
provided for machine-dependent use and is not defined here. It should
be initialized to NULL if not used.
As specified by cmd, the following commands are available:
A_SHUTDOWN The system is shut down. All user processes are killed,
the buffer cache is flushed, and the root file system is
unmounted. The action to be taken after the system has
been shut down is specified by fcn. The functions are
generic; the hardware capabilities vary on specific
machines.
AD_HALT Halt the processor(s).
AD_POWEROFF Halt the processor(s) and turn off the
power.
AD_BOOT Reboot the system, using the kernel
file.
AD_IBOOT Interactive reboot; user is prompted for
bootable program name.
AD_FASTREBOOT Bypass BIOS and boot loader
A_REBOOT The system stops immediately without any further process‐
ing. The action to be taken next is specified by fcn as
above.
A_DUMP The system is forced to panic immediately without any
further processing and a crash dump is written to the
dump device (see dumpadm(8)). The action to be taken next
is specified by fcn, as above.
A_REMOUNT The root file system is mounted again after having been
fixed. This should be used only during the startup
process.
A_FREEZE Suspend the whole system. The system state is preserved
in the state file. The following subcommands, specified
by fcn, are available.
AD_SUSPEND_TO_DISK
Save the system state to the state file. This subcom‐
mand is equivalent to ACPI state S4.
AD_CHECK_SUSPEND_TO_DISK
Check if your system supports suspend to disk. With‐
out performing a system suspend/resume, this subcom‐
mand checks if this feature is currently available on
your system.
AD_SUSPEND_TO_RAM
Save the system state to memory This subcommand is
equivalent to ACPI state S3.
AD_CHECK_SUSPEND_TO_RAM
Check if your system supports suspend to memory.
Without performing a system suspend/resume, this sub‐
command checks if this feature is currently available
on your system.
The following subcommands, specified by fcn, are obsolete
and might be removed in a subsequent release:
AD_COMPRESS
Save the system state to the state file with compres‐
sion of data. This subcommand has been replaced by
AD_SUSPEND_TO_DISK, which should be used instead.
AD_CHECK
Check if your system supports suspend and resume.
Without performing a system suspend/resume, this com‐
mand checks if this feature is currently available on
your system. This subcommand has been replaced by
AD_CHECK_SUSPEND_TO_DISK, which should be used
instead.
AD_FORCE
Force AD_COMPRESS even when threads of user applica‐
tions are not suspendable. This subcommand should
never be used, as it might result in undefined behav‐
ior.
RETURN VALUES
Upon successful completion, the value returned depends on cmd as fol‐
lows:
A_SHUTDOWN Never returns.
A_REBOOT Never returns.
A_FREEZE 0 upon resume.
A_REMOUNT 0.
Otherwise, −1 is returned and errno is set to indicate the error.
ERRORS
The uadmin() function will fail if:
EBUSY Suspend is already in progress.
EINVAL The cmd argument is invalid.
ENOMEM Suspend/resume ran out of physical memory.
ENOSPC Suspend/resume could not allocate enough space on the root
file system to store system information.
ENOTSUP Suspend/resume is not supported on this platform or the com‐
mand specified by cmd is not allowed.
ENXIO Unable to successfully suspend system.
EPERM The {PRIV_SYS_CONFIG} privilege is not asserted in the
effective set of the calling process.
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE TYPEAT‐
TRIBUTE VALUE _ Interface StabilitySee below.
The A_FREEZE command and its subcommands are Committed.
SEE ALSO
attributes(7), privileges(7), dumpadm(8), halt(8), kernel(8),
reboot(8), uadmin(8)
WARNINGS
Shutting down or halting the system by means of uadmin(8) does not
update the boot archive. Avoid using this command after
o editing of files such as /etc/system
o installing new driver binaries or kernel binaries
o updating existing driver binaries or kernel binaries.
Use reboot(8) or halt(8) instead.
Oracle Solaris 11.4 25 Mar 2009 uadmin(2)