svcadm(1M)을 검색하려면 섹션에서 1M 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
getopts(1)
getopts(1) User Commands getopts(1)
NAME
getopts - parse utility options
SYNOPSIS
/usr/bin/getopts optstring name [arg...]
sh
getopts optstring name [argument]...
ksh88
getopts optstring name [arg]...
ksh
getopts [-a name] optstring name [arg]...
DESCRIPTION
/usr/bin/getopts
The getopts utility can be used to retrieve options and option-argu‐
ments from a list of parameters.
Each time it is invoked, the getopts utility places the value of the
next option in the shell variable specified by the name operand and the
index of the next argument to be processed in the shell variable
OPTIND. Whenever the shell is invoked, OPTIND is initialized to 1.
When the option requires an option-argument, the getopts utility places
it in the shell variable OPTARG. If no option was found, or if the
option that was found does not have an option-argument, OPTARG is
unset.
If an option character not contained in the optstring operand is found
where an option character is expected, the shell variable specified by
name is set to the question-mark ( ? ) character. In this case, if the
first character in optstring is a colon (:), the shell variable OPTARG
is set to the option character found, but no output is written to stan‐
dard error; otherwise, the shell variable OPTARG is unset and a diag‐
nostic message is written to standard error. This condition is consid‐
ered to be an error detected in the way arguments were presented to the
invoking application, but is not an error in getopts processing.
If an option-argument is missing:
o If the first character of optstring is a colon, the shell
variable specified by name is set to the colon character and
the shell variable OPTARG is set to the option character
found.
o Otherwise, the shell variable specified by name is set to
the question-mark character (?), the shell variable OPTARG
is unset, and a diagnostic message is written to standard
error. This condition is considered to be an error detected
in the way arguments were presented to the invoking applica‐
tion, but is not an error in getopts processing; a diagnos‐
tic message is written as stated, but the exit status is
zero.
When the end of options is encountered, the getopts utility exits with
a return value greater than zero; the shell variable OPTIND is set to
the index of the first non-option-argument, where the first −− argument
is considered to be an option-argument if there are no other non-
option-arguments appearing before it, or the value $# + 1 if there are
no non-option-arguments; the name variable is set to the question-mark
character. Any of the following identifies the end of options: the spe‐
cial option −−, finding an argument that does not begin with a −, or
encountering an error.
The shell variables OPTIND and OPTARG are local to the caller of
getopts and are not exported by default.
The shell variable specified by the name operand, OPTIND and OPTARG
affect the current shell execution environment.
If the application sets OPTIND to the value 1, a new set of parameters
can be used: either the current positional parameters or new arg val‐
ues. Any other attempt to invoke getopts multiple times in a single
shell execution environment with parameters (positional parameters or
arg operands) that are not the same in all invocations, or with an
OPTIND value modified to be a value other than 1, produces unspecified
results.
sh
getopts is a built-in Bourne shell command used to parse positional
parameters and to check for valid options. See sh(1). It supports all
applicable rules of the command syntax standard (see Rules 3-10,
Intro(1)). It should be used in place of the getopt command.
optstring must contain the option letters the command using getopts
recognizes. If a letter is followed by a colon, the option is expected
to have an argument, or group of arguments, which must be separated
from it by white space.
Each time it is invoked, getopts places the next option in the shell
variable name and the index of the next argument to be processed in the
shell variable OPTIND. Whenever the shell or a shell script is invoked,
OPTIND is initialized to 1.
When an option requires an option-argument, getopts places it in the
shell variable OPTARG.
If an illegal option is encountered, ? is placed in name.
When the end of options is encountered, getopts exits with a non-zero
exit status. The special option -- can be used to delimit the end of
the options.
By default, getopts parses the positional parameters. If extra argu‐
ments (argument ...) are specified on the getopts command line, getopts
parses them instead.
/usr/lib/getoptcvt reads the shell script in filename, converts it to
use getopts instead of getopt, and writes the results on the standard
output.
So that all new commands adhere to the command syntax standard
described in Intro(1), they should use getopts or getopt to parse posi‐
tional parameters and check for options that are valid for that com‐
mand.
getopts prints an error message on the standard error when it encoun‐
ters an option letter not included in optstring.
Although the following command syntax rule (see Intro(1)) relaxations
are permitted under the current implementation, they should not be used
because they can not be supported in future releases of the system. As
in the EXAMPLES section below, -a and -b are options, and the option -o
requires an option-argument.
The following example violates Rule 5: options with option-arguments
must not be grouped with other options:
example% cmd -aboxxx filename
The following example violates Rule 6: there must be white space after
an option that takes an option-argument:
example% cmd -ab oxxx filename
Changing the value of the shell variable OPTIND or parsing different
sets of arguments can lead to unexpected results.
ksh88
Checks arg for legal options. If arg is omitted, the positional parame‐
ters are used. An option argument begins with a + or a −. An option not
beginning with + or −, or the argument --, ends the options. optstring
contains the letters that getopts recognizes. If a letter is followed
by a :, that option is expected to have an argument. The options can be
separated from the argument by blanks.
getopts places the next option letter it finds inside variable name
each time it is invoked with a + prepended when arg begins with a +.
The index of the next arg is stored in OPTIND. The option argument, if
any, gets stored in OPTARG.
A leading : in optstring causes getopts to store the letter of an
invalid option in OPTARG, and to set name to ? for an unknown option
and to : when a required option is missing. Otherwise, getopts prints
an error message. The exit status is non-zero when there are no more
options.
getopts supports both traditional single-character short options and
long options defined by Sun's Command Line Interface Paradigm (CLIP).
Each long option is an alias for a short option and is specified in
parentheses following its equivalent short option. For example, you can
specify the long option file as an alias for the short option f using
the following script line:
getopts "f(file)" opt
Precede long options on the command line with -- or ++. In the example
above, --file on the command line would be the equivalent of -f, and
++file on the command line would be the equivalent of +f.
Each short option can have multiple long option equivalents, although
this is in violation of the CLIP specification and should be used with
caution. You must enclose each long option equivalent parentheses, as
follows:
getopts "f:(file)(input-file)o:(output-file)"
In the above example, both --file and --input-file are the equivalent
of -f, and --output-file is the equivalent of -o.
The variable name is always set to a short option. When a long option
is specified on the command line, name is set to the short-option
equivalent.
For a further discussion of the Korn shell's getopts built-in command,
see the previous discussion in the Bourne shell (sh) section of this
manpage.
ksh
The getopts utility can be used to retrieve options and arguments from
a list of arguments specified by args or the positional parameters if
arg is omitted. It can also generate usage messages and a manual page
for the command based on the information in optstring.
Each time it is invoked, the getopts utility places the value of the
next option in the shell variable specified by the name operand and the
index of the next argument to be processed in the shell variable
OPTIND. When the shell is invoked OPTIND is initialized to 1. When an
option requires or permits an option argument, getopts places the
option argument in the shell variable OPTARG. Otherwise OPTARG is set
to 1 when the option is set and 0 when the option is unset.
The optstring string consists of alphanumeric characters, the special
characters +, -, ?, :, and SPACE or character groups enclosed in [...].
Character groups can be nested in {...}. Outside of a [...] group, a
single NEWLINE followed by zero or more blanks is ignored. One or more
blank lines separate the options from the command argument synopsis.
Each [...] group consists of an optional label, optional attributes
separated by :, and an optional description string following ?. The
characters from the ? to the end of the next ] are ignored for option
parsing and short usage messages. They are used for generating verbose
help or man pages. The : character can not appear in the label. The ?
character must be specified as ?? in the label and the ] character must
be specified as ]] in the description string. Text between two \b
(backspace) characters indicates that the text should be emboldened
when displayed. Text between two \a (bell) characters indicates that
the text should be emphasized or italicized when displayed. Text
between two \v (vertical tab) characters indicates that the text should
displayed in a fixed-width font. Text between two \f (form feed) char‐
acters is replaced by the output from the shell function whose name is
that of the enclosed text.
All output from this interface is written to the standard error.
There are several group types:
o A group of the form
[-[version][flag[number]]...[?text]]
which appears as the first group enables the extended inter‐
face.
version specifies the interface version, currently 1. The
latest version is assumed if version is omitted. Future
enhancements can increment version, but all versions are
supported. text typically specifies an SCCS or CVS identifi‐
cation string. Zero or more flags with optional number val‐
ues can be specified to control option parsing. The flags
are:
c Cache this optstring for multiple passes. Used to opti‐
mize built-ins that can be called many times within the
same process.
i Ignore this optstring when generating help. Used when
combining optstring values from multiple passes.
l Display only long option names in help messages.
o The - option character prefix is optional. This sup‐
ports the obsolete ps(1) option syntax.
p The number specifies the number of - characters that
must prefix long option names. The default is 2. 0, 1
or 2 are accepted, for example p0 for dd(8) and p1 for
find(1).
s The number specifies the manual page section number, 1
by default.
o An option specification of the form [option[!][=num‐
ber][:longname][?text]]. In this case the first field is the
option character, which is the value returned in the name
operand when the option is matched. If there is no option
character then a two or more digit number should be speci‐
fied. This number is returned as the value of the name oper‐
and if the long option is matched. If option is followed by
a ! then the option character sense is the inverse of the
longname sense. For options that do not take values OPTARG
is set to 0 for ! inverted option characters and 1 other‐
wise. =number optionally specifies a number to be returned
in the name operand instead of the option character. A long‐
name is specified by --longname and is matched by the short‐
est non-ambiguous prefix of all long options. An * in the
longname field indicates that only characters up to that
point need to match, provided any additional characters
match exactly. The enclosing [ and ] can be omitted for an
option that does not have a longname or descriptive text.
o An option argument specification. Options that take argu‐
ments can be followed by :, indicating a string value or #,
indicating a numeric value, and an option argument specifi‐
cation. An option argument specification consists of the
option argument name as field 1. The remaining : separated
fields are a type name and zero or more of the special
attribute words listof, oneof, and ignorecase. A default
option value can be specified in the final field as
:=default. The option argument specification can be followed
by a list of option value descriptions enclosed in braces. A
long option that takes an argument is specified as --long‐
name=value. If the : or # is followed by ?, the option argu‐
ment is optional. If only the option character form is spec‐
ified then the optional argument value is not set if the
next argument starts with - or +.
o An option value description.
o An argument specification. A list of valid option argument
values can be specified by enclosing them inside a {...}
following the option argument specification. Each of the
permitted values can be specified with a [...] containing
the value followed by a description.
o A group of the form [+\n...] displays the characters repre‐
senting ... in fixed-width font without adding line breaks.
o A group of the form [+name?text] specifies a section name
with descriptive text. If name is omitted, text is placed in
a new paragraph.
o A group of the form [-name?text] specifies entries for the
IMPLEMENTATION section.
If the leading character of optstring is +, arguments beginning with +
are also be considered options.
A leading : character or a : following a leading + in optstring affects
the way errors are handled. If an option character or longname argument
not specified in optstring is encountered when processing options, the
shell variable whose name is name is set to the ? character. The shell
variable OPTARG is set to the character found. If an option argument is
missing or has an invalid value, then name is set to the : character
and the shell variable OPTARG is set to the option character found.
Without the leading :, name is set to the ? character, OPTARG is unset,
and an error message is written to standard error when errors are
encountered.
The end of options occurs when:
1. The special argument -- is encountered.
2. An argument that does not begin with a - is encountered.
3. A help argument is specified.
4. An error is encountered.
If OPTIND is set to the value 1, a new set of arguments can be used.
getopts can also be used to generate help messages containing command
usage and detailed descriptions. Specify args as:
-? Use this to generate a usage synopsis.
--?? Use this to generate a verbose usage message.
--??man Use this to generate a formatted manual page.
--??api Use this to generate an easy to parse usage message.
--??html Use this to generate a man page in html format.
--??nroff Use this to generate a man page in nroff format.
--??usage Use this to list the current optstring.
--???name Use this to list version=n, where n is greater than 0, if
the option name is recognized by getopts.
When the end of options is encountered, getopts exits with a non-zero
return value and the variable OPTIND is set to the index of the first
non-option argument.
OPTIONS
ksh
The following options are supported by ksh:
-a name Use name instead of the command name in usage messages.
OPERANDS
The following operands are supported:
optstring A string containing the option characters recognised by
the utility invoking getopts. If a character is followed
by a colon, the option is expected to have an argument,
which should be supplied as a separate argument. Applica‐
tions should specify an option character and its option-
argument as separate arguments, but getopts interprets the
characters following an option character requiring argu‐
ments as an argument whether or not this is done. An
explicit null option-argument need not be recognised if it
is not supplied as a separate argument when getopts is
invoked; see getopt(3C). The characters question-mark (?)
and colon (:) must not be used as option characters by an
application. The use of other option characters that are
not alphanumeric produces unspecified results. If the
option-argument is not supplied as a separate argument
from the option character, the value in OPTARG is stripped
of the option character and the −. The first character in
optstring determines how getopts behaves if an option
character is not known or an option-argument is missing.
name The name of a shell variable that is set by the getopts
utility to the option character that was found.
The getopts utility by default parses positional parameters passed to
the invoking shell procedure. If args are specified, they are parsed
instead of the positional parameters.
USAGE
Since getopts affects the current shell execution environment, it is
generally provided as a shell regular built-in. If it is called in a
subshell or separate utility execution environment, such as one of the
following:
(getopts abc value "$@")
nohup getopts ...
find . -exec getopts ... \;
it does not affect the shell variables in the caller's environment.
Notice that shell functions share OPTIND with the calling shell even
though the positional parameters are changed. Functions that want to
use getopts to parse their arguments usually want to save the value of
OPTIND on entry and restore it before returning. However, there are
cases when a function wants to change OPTIND for the calling shell.
EXAMPLES
Example 1 Parsing and Displaying Arguments
The following example script parses and displays its arguments:
aflag=
bflag=
while getopts ab: name
do
case $name in
a) aflag=1;;
b) bflag=1
bval="$OPTARG";;
?) printf "Usage: %s: [-a] [-b value] args\n" $0
exit 2;;
esac
done
if [ ! -z "$aflag" ]; then
printf "Option -a specified\n"
fi
if [ ! -z "$bflag" ]; then
printf 'Option -b "%s" specified\n' "$bval"
fi
shift $(($OPTIND - 1))
printf "Remaining arguments are: %s\n" "$*"
Example 2 Processing Arguments for a Command with Options
The following fragment of a shell program processes the arguments for a
command that can take the options -a or -b. It also processes the
option -o, which requires an option-argument:
while getopts abo: c
do
case $c in
a | b) FLAG=$c;;
o) OARG=$OPTARG;;
\?) echo $USAGE
exit 2;;
esac
done
shift `expr $OPTIND − 1`
Example 3 Equivalent Code Expressions
This code example accepts any of the following as equivalent:
cmd -a -b -o "xxx z yy" filename
cmd -a -b -o "xxx z yy" -- filename
cmd -ab -o xxx,z,yy filename
cmd -ab -o "xxx z yy" filename
cmd -o xxx,z,yy -b -a filename
ENVIRONMENT VARIABLES
See environ(7) for descriptions of the following environment variables
that affect the execution of getopts: LANG, LC_ALL, LC_CTYPE, LC_MES‐
SAGES, and NLSPATH.
OPTIND This variable is used by getopts as the index of the next
argument to be processed.
OPTARG This variable is used by getopts to store the argument if an
option is using arguments.
EXIT STATUS
The following exit values are returned:
0 An option, specified or unspecified by optstring, was found.
> 0 The end of options was encountered or an error occurred.
ksh
The following exit values are returned by ksh:
0 A specified option was found.
1 An end of options was encountered.
2 A usage or information message was generated.
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
/usr/bin/getopts, sh, ksh88
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE TYPEAT‐
TRIBUTE VALUE _ Availabilitysystem/core-os _ Interface StabilityCommit‐
ted _ StandardSee standards(7).
ksh
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE TYPEAT‐
TRIBUTE VALUE _ Availabilitysystem/core-os _ Interface StabilityUncom‐
mitted
SEE ALSO
getoptcvt(1), Intro(1), ksh(1), ksh88(1), ps(1), sh(1), getopt(3C),
attributes(7), environ(7), standards(7)
DIAGNOSTICS
Whenever an error is detected and the first character in the optstring
operand is not a colon (:), a diagnostic message is written to standard
error with the following information in an unspecified format:
o The invoking program name is identified in the message. The
invoking program name is the value of the shell special
parameter 0 at the time the getopts utility is invoked. A
name equivalent to
basename "$0"
can be used.
o If an option is found that was not specified in optstring,
this error is identified and the invalid option character is
identified in the message.
o If an option requiring an option-argument is found, but an
option-argument is not found, this error is identified and
the invalid option character is identified in the message.
Oracle Solaris 11.4 12 Jun 2020 getopts(1)