svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
sudo_sendlog(1m)
SUDO_SENDLOG(1m) System Manager's Manual SUDO_SENDLOG(1m)
NAME
sudo_sendlog - send sudo I/O log to log server
SYNOPSIS
sudo_sendlog [-AnV] [-b ca_bundle] [-c cert_file] [-h host] [-i iolog-
id] [-k key_file] [-p port] [-r restart-point] [-R reject-
reason] [-t number] path
DESCRIPTION
sudo_sendlog can be used to send the existing sudoers I/O log path to a
remote log server such as sudo_logsrvd(1m) for central storage.
The options are as follows:
-A, --accept-only
Only send the accept event, not the I/O associated with the
log. This can be used to test the logging of accept events
without any associated I/O.
-b, --ca-bundle
The path to a certificate authority bundle file, in PEM
format, to use instead of the system's default certificate
authority database when authenticating the log server. The
default is to use the system's default certificate
authority database.
-c, --cert The path to the client's certificate file in PEM format.
This setting is required when the connection to the remote
log server is secured with TLS.
--help Display a short help message to the standard output and
exit.
-h, --host Connect to the specified host instead of localhost.
-i, --iolog-id
Use the specified iolog-id when restarting a log transfer.
The iolog-id is reported by the server when it creates the
remote I/O log. This option may only be used in
conjunction with the -r option.
-k, --key
The path to the client's private key file in PEM format.
This setting is required when the connection to the remote
log server is secured with TLS.
-n, --no-verify
If specified, the server's certificate will not be verified
during the TLS handshake. By default, sudo_sendlog
verifies that the server's certificate is valid and that it
contains either the server's host name or its IP address.
This setting is only supported when the connection to the
remote log server is secured with TLS.
-p, --port Use the specified network port when connecting to the log
server instead of the default, port 30344.
-r, --restart
Restart an interrupted connection to the log server. The
specified restart-point is used to tell the server the
point in time at which to continue the log. The restart-
point is specified in the form “seconds,nanoseconds” and is
usually the last commit point received from the server.
The -i option must also be specified when restarting a
transfer.
-R, --reject
Send a reject event for the command using the specified
reject-reason, even though it was actually accepted
locally. This can be used to test the logging of reject
events; no I/O will be sent.
-t, --test Open number simultaneous connections to the log server and
send the specified I/O log file on each one. This option
is useful for performance testing.
-V, --version
Print the sudo_sendlog version and exit.
Debugging sendlog
sudo_sendlog supports a flexible debugging framework that is configured
via Debug lines in the sudo.conf(4) file.
For more information on configuring sudo.conf(4), please refer to its
manual.
FILES
/etc/sudo.conf Sudo front end configuration
SEE ALSO
sudo.conf(4), sudo(1m), sudo_logsrvd(1m)
AUTHORS
Many people have worked on sudo over the years; this version consists
of code written primarily by:
Todd C. Miller
See the CONTRIBUTORS file in the sudo distribution
(https://www.sudo.ws/contributors.html) for an exhaustive list of
people who have contributed to sudo.
BUGS
If you feel you have found a bug in sudo_sendlog, please submit a bug
report at https://bugzilla.sudo.ws/
SUPPORT
Limited free support is available via the sudo-users mailing list, see
https://www.sudo.ws/mailman/listinfo/sudo-users to subscribe or search
the archives.
DISCLAIMER
sudo_sendlog is provided “AS IS” and any express or implied warranties,
including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose are disclaimed.
See the LICENSE file distributed with sudo or
https://www.sudo.ws/license.html for complete details.
Sudo 1.9.5p2 May 12, 2020 SUDO_SENDLOG(1m)