svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
sudo_logsrv.proto(4)
SUDO_LOGSRV.PROTO(4) File Formats Manual SUDO_LOGSRV.PROTO(4)
NAME
sudo_logsrv.proto - Sudo log server protocol
DESCRIPTION
Starting with version 1.9.0, sudo supports sending event and I/O logs
to a log server. The protocol used is written in Google's Protocol
Buffers domain specific language. The EXAMPLES section includes a
complete description of the protocol in Protocol Buffers format.
Because there is no way to determine message boundaries when using
Protocol Buffers, the wire size of each message is sent immediately
preceding the message itself as a 32-bit unsigned integer in network
byte order. This is referred to as “length-prefix framing” and is how
Google suggests handling the lack of message delimiters.
The protocol is made up of two basic messages, ClientMessage and
ServerMessage, described below. The server must accept messages up to
two megabytes in size. The server may return an error if the client
tries to send a message larger than two megabytes.
Client Messages
A ClientMessage is a container used to encapsulate all the possible
message types a client may send to the server.
message ClientMessage {
oneof type {
AcceptMessage accept_msg = 1;
RejectMessage reject_msg = 2;
ExitMessage exit_msg = 3;
RestartMessage restart_msg = 4;
AlertMessage alert_msg = 5;
IoBuffer ttyin_buf = 6;
IoBuffer ttyout_buf = 7;
IoBuffer stdin_buf = 8;
IoBuffer stdout_buf = 9;
IoBuffer stderr_buf = 10;
ChangeWindowSize winsize_event = 11;
CommandSuspend suspend_event = 12;
ClientHello hello_msg = 13;
}
}
The different ClientMessage sub-messages the client may sent to the
server are described below.
TimeSpec
message TimeSpec {
int64 tv_sec = 1;
int32 tv_nsec = 2;
}
A TimeSpec is the equivalent of a POSIX struct timespec, containing
seconds and nanoseconds members. The tv_sec member is a 64-bit integer
to support dates after the year 2038.
InfoMessage
message InfoMessage {
message StringList {
repeated string strings = 1;
}
message NumberList {
repeated int64 numbers = 1;
}
string key = 1;
oneof value {
int64 numval = 2;
string strval = 3;
StringList strlistval = 4;
NumberList numlistval = 5;
}
}
An InfoMessage is used to represent information about the invoking user
as well as the execution environment the command runs in the form of
key-value pairs. The key is always a string but the value may be a
64-bit integer, a string, an array of strings or an array of 64-bit
integers. The event log data is composed of InfoMessage entries. See
the EVENT LOG VARIABLES section for more information.
ClientHello hello_msg
message ClientHello {
string client_id = 1;
}
A ClientHello message consists of client information that may be sent
to the server when the client first connects.
client_id
A free-form client description. This usually includes the name
and version of the client implementation.
AcceptMessage accept_msg
message AcceptMessage {
TimeSpec submit_time = 1;
repeated InfoMessage info_msgs = 2;
bool expect_iobufs = 3;
}
An AcceptMessage is sent by the client when a command is allowed by the
security policy. It contains the following members:
submit_time
The wall clock time when the command was submitted to the
security policy.
info_msgs
An array of InfoMessage describing the user who submitted the
command as well as the execution environment of the command.
This information is used to generate an event log entry and may
also be used by server to determine where and how the I/O log
is stored.
expect_iobufs
Set to true if the server should expect IoBuffer messages to
follow (for I/O logging) or false if the server should only
store the event log.
If an AcceptMessage is sent, the client must not send a RejectMessage
or RestartMessage.
RejectMessage reject_msg
message RejectMessage {
TimeSpec submit_time = 1;
string reason = 2;
repeated InfoMessage info_msgs = 3;
}
A RejectMessage is sent by the client when a command is denied by the
security policy. It contains the following members:
submit_time
The wall clock time when the command was submitted to the
security policy.
reason The reason the security policy gave for denying the command.
info_msgs
An array of InfoMessage describing the user who submitted the
command as well as the execution environment of the command.
This information is used to generate an event log entry.
If a RejectMessage is sent, the client must not send an AcceptMessage
or RestartMessage.
ExitMessage exit_msg
message ExitMessage {
TimeSpec run_time = 1;
int32 exit_value = 2;
bool dumped_core = 3;
string signal = 4;
string error = 5;
}
An ExitMessage is sent by the client after the command has exited or
has been terminated by a signal. It contains the following members:
run_time
The total amount of elapsed time since the command started,
calculated using a monotonic clock where possible. This is not
the wall clock time.
exit_value
The command's exit value in the range 0-255.
dumped_core
True if the command was terminated by a signal and dumped core.
signal If the command was terminated by a signal, this is set to the
name of the signal without the leading “SIG”. For example,
INT, TERM, KILL, SEGV.
error A message from the client indicating that the command was
terminated unexpectedly due to an error.
When performing I/O logging, the client should wait for a commit_point
corresponding to the final IoBuffer before closing the connection
unless the final commit_point has already been received.
RestartMessage restart_msg
message RestartMessage {
string log_id = 1;
TimeSpec resume_point = 2;
}
A RestartMessage is sent by the client to resume sending an existing
I/O log that was previously interrupted. It contains the following
members:
log_id The the server-side name for an I/O log that was previously
sent to the client by the server. This may be a path name on
the server or some other kind of server-side identifier.
resume_point
The point in time after which to resume the I/O log. This is
in the form of a TimeSpec representing the amount of time since
the command started, not the wall clock time. The resume_point
should correspond to a commit_point previously sent to the
client by the server. If the server receives a RestartMessage
containing a resume_point it has not previously seen, an error
will be returned to the client and the connection will be
dropped.
If a RestartMessage is sent, the client must not send an AcceptMessage
or RejectMessage.
AlertMessage alert_msg
message AlertMessage {
TimeSpec alert_time = 1;
string reason = 2;
repeated InfoMessage info_msgs = 3;
}
An AlertMessage is sent by the client to indicate a problem detected by
the security policy while the command is running that should be stored
in the event log. It contains the following members:
alert_time
The wall clock time when the alert occurred.
reason The reason for the alert.
info_msgs
An optional array of InfoMessage describing the user who
submitted the command as well as the execution environment of
the command. This information is used to generate an event log
entry.
IoBuffer ttyin_buf | ttyout_buf | stdin_buf | stdout_buf | stderr_buf
message IoBuffer {
TimeSpec delay = 1;
bytes data = 2;
}
An IoBuffer is used to represent data from terminal input, terminal
output, standard input, standard output or standard error. It contains
the following members:
delay The elapsed time since the last record in the form of a
TimeSpec. The delay should be calculated using a monotonic
clock where possible.
data The binary I/O log data from terminal input, terminal output,
standard input, standard output or standard error.
ChangeWindowSize winsize_event
message ChangeWindowSize {
TimeSpec delay = 1;
int32 rows = 2;
int32 cols = 3;
}
A ChangeWindowSize message is sent by the client when the terminal
running the command changes size. It contains the following members:
delay The elapsed time since the last record in the form of a
TimeSpec. The delay should be calculated using a monotonic
clock where possible.
rows The new number of terminal rows.
cols The new number of terminal columns.
CommandSuspend suspend_event
message CommandSuspend {
TimeSpec delay = 1;
string signal = 2;
}
A CommandSuspend message is sent by the client when the command is
either suspended or resumed. It contains the following members:
delay The elapsed time since the last record in the form of a
TimeSpec. The delay should be calculated using a monotonic
clock where possible.
signal The signal name without the leading “SIG”. For example, STOP,
TSTP, CONT.
Server Messages
A ServerMessage is a container used to encapsulate all the possible
message types the server may send to a client.
message ServerMessage {
oneof type {
ServerHello hello = 1;
TimeSpec commit_point = 2;
string log_id = 3;
string error = 4;
string abort = 5;
}
}
The different ServerMessage sub-messages the server may sent to the
client are described below.
ServerHello hello
message ServerHello {
string server_id = 1;
string redirect = 2;
repeated string servers = 3;
}
The ServerHello message consists of server information sent when the
client first connects. It contains the following members:
server_id
A free-form server description. Usually this includes the name
and version of the implementation running on the log server.
This member is always present.
redirect
A host and port separated by a colon (‘’): that the client
should connect to instead. The host may be a host name, an
IPv4 address, or an IPv6 address in square brackets. This may
be used for server load balancing. The server will disconnect
after sending the ServerHello when it includes a redirect.
servers
A list of other known log servers. This can be used to
implement log server redundancy and allows the client to
discover all other log servers simply by connecting to one
known server. This member may be omitted when there is only a
single log server.
TimeSpec commit_point
A periodic time stamp sent by the server to indicate when I/O log
buffers have been committed to storage. This message is not sent after
every IoBuffer but rather at a server-configurable interval. When the
server receives an ExitMessage, it will respond with a commit_point
corresponding to the last received IoBuffer before closing the
connection.
string log_id
The server-side ID of the I/O log being stored, sent in response to an
AcceptMessage where expect_iobufs is true.
string error
A fatal server-side error. The server will close the connection after
sending the error message.
string abort
An abort message from the server indicates that the client should kill
the command and terminate the session. It may be used to implement
simple server-side policy. The server will close the connection after
sending the abort message.
Protocol flow of control
The expected protocol flow is as follows:
1. Client connects to the first available server. If the client is
configured to use TLS, a TLS handshake will be attempted.
2. Client sends ClientHello. This is currently optional but allows
the server to detect a non-TLS connection on the TLS port.
3. Server sends ServerHello.
4. Client responds with either AcceptMessage, RejectMessage, or
RestartMessage.
5. If client sent a AcceptMessage with expect_iobufs set, server
creates a new I/O log and responds with a log_id.
6. Client sends zero or more IoBuffer messages.
7. Server periodically responds to IoBuffer messages with a
commit_point.
8. Client sends an ExitMessage when the command exits or is killed.
9. Server sends the final commit_point if one is pending.
10. Server closes the connection. After receiving the final
commit_point, the client shuts down its side of the TLS connection
if TLS is in use, and closes the connection.
11. Server shuts down its side of the TLS connection if TLS is in use,
and closes the connection.
At any point, the server may send an error or abort message to the
client at which point the server will close the connection. If an
abort message is received, the client should terminate the running
command.
EVENT LOG VARIABLES
AcceptMessage, AlertMessage and RejectMessage classes contain an array
of InfoMessage that should contain information about the user who
submitted the command as well as information about the execution
environment of the command if it was accepted.
Some variables have a client, run, or submit prefix. These prefixes
are used to eliminate ambiguity for variables that could apply to the
client program, the user submitting the command, or the command being
run. Variables with a client prefix pertain to the program performing
the connection to the log server, for example sudo. Variables with a
run prefix pertain to the command that the user requested be run.
Variables with a submit prefix pertain to the user submitting the
request (the user running sudo).
The following InfoMessage entries are required: l l l.
Key Type Description
command string command that was submitted
runuser string name of user the command was run as
submithost string name of host the command was submitted on
submituser string name of user submitting the command
The following InfoMessage entries are recognized, but not required: l l
l.
Key Type Description
clientargv StringList client's original argument vector
clientpid int64 client's process ID
clientppid int64 client's parent process ID
clientsid int64 client's terminal session ID
columns int64 number of columns in the terminal
lines int64 number of lines in the terminal
runargv StringList argument vector of command to run
runchroot string root directory of command to run
runcwd string running command's working directory
runenv StringList the running command's environment
rungid int64 primary group-ID of the command
rungids NumberList supplementary group-IDs for the command
rungroup string primary group name of the command
rungroups StringList supplementary group names for the command
runuid int64 run user's user-ID
submitcwd string submit user's current working directory
submitenv StringList the submit user's environment
submitgid int64 submit user's primary group-ID
submitgids NumberList submit user's supplementary group-IDs
submitgroup string submitting user's primary group name
submitgroups StringList submit user's supplementary group names
submituid int64 submit user's user-ID
ttyname string the terminal the command was submitted from
The server must accept other variables not listed above but may ignore
them.
EXAMPLES
The Protocol Buffers description of the log server protocol is included
in full below. Note that this uses the newer “proto3” syntax.
syntax = "proto3";
/*
* Client message to the server. Messages on the wire are
* prefixed with a 32-bit size in network byte order.
*/
message ClientMessage {
oneof type {
AcceptMessage accept_msg = 1;
RejectMessage reject_msg = 2;
ExitMessage exit_msg = 3;
RestartMessage restart_msg = 4;
AlertMessage alert_msg = 5;
IoBuffer ttyin_buf = 6;
IoBuffer ttyout_buf = 7;
IoBuffer stdin_buf = 8;
IoBuffer stdout_buf = 9;
IoBuffer stderr_buf = 10;
ChangeWindowSize winsize_event = 11;
CommandSuspend suspend_event = 12;
}
}
/* Equivalent of POSIX struct timespec */
message TimeSpec {
int64 tv_sec = 1; /* seconds */
int32 tv_nsec = 2; /* nanoseconds */
}
/* I/O buffer with keystroke data */
message IoBuffer {
TimeSpec delay = 1; /* elapsed time since last record */
bytes data = 2; /* keystroke data */
}
/*
* Key/value pairs, like Privilege Manager struct info.
* The value may be a number, a string, or a list of strings.
*/
message InfoMessage {
message StringList {
repeated string strings = 1;
}
message NumberList {
repeated int64 numbers = 1;
}
string key = 1;
oneof value {
int64 numval = 2;
string strval = 3;
StringList strlistval = 4;
NumberList numlistval = 5;
}
}
/*
* Event log data for command accepted by the policy.
*/
message AcceptMessage {
TimeSpec submit_time = 1; /* when command was submitted */
repeated InfoMessage info_msgs = 2; /* key,value event log data */
bool expect_iobufs = 3; /* true if I/O logging enabled */
}
/*
* Event log data for command rejected by the policy.
*/
message RejectMessage {
TimeSpec submit_time = 1; /* when command was submitted */
string reason = 2; /* reason command was rejected */
repeated InfoMessage info_msgs = 3; /* key,value event log data */
}
/* Message sent by client when command exits. */
/* Might revisit runtime and use end_time instead */
message ExitMessage {
TimeSpec run_time = 1; /* total elapsed run time */
int32 exit_value = 2; /* 0-255 */
bool dumped_core = 3; /* true if command dumped core */
string signal = 4; /* signal name if killed by signal */
string error = 5; /* if killed due to other error */
}
/* Alert message, policy module-specific. */
message AlertMessage {
TimeSpec alert_time = 1; /* time alert message occurred */
string reason = 2; /* policy alert error string */
repeated InfoMessage info_msgs = 3; /* key,value event log data */
}
/* Used to restart an existing I/O log on the server. */
message RestartMessage {
string log_id = 1; /* ID of log being restarted */
TimeSpec resume_point = 2; /* resume point (elapsed time) */
}
/* Window size change event. */
message ChangeWindowSize {
TimeSpec delay = 1; /* elapsed time since last record */
int32 rows = 2; /* new number of rows */
int32 cols = 3; /* new number of columns */
}
/* Command suspend/resume event. */
message CommandSuspend {
TimeSpec delay = 1; /* elapsed time since last record */
string signal = 2; /* signal that caused suspend/resume */
}
/*
* Server messages to the client. Messages on the wire are
* prefixed with a 32-bit size in network byte order.
*/
message ServerMessage {
oneof type {
ServerHello hello = 1; /* server hello message */
TimeSpec commit_point = 2; /* cumulative time of records stored */
string log_id = 3; /* ID of server-side I/O log */
string error = 4; /* error message from server */
string abort = 5; /* abort message, kill command */
}
}
/* Hello message from server when client connects. */
message ServerHello {
string server_id = 1; /* free-form server description */
string redirect = 2; /* optional redirect if busy */
repeated string servers = 3; /* optional list of known servers */
}
SEE ALSO
sudo_logsrvd.conf(4), sudoers(4), sudo(8), sudo_logsrvd(8)
Protocol Buffers, https://developers.google.com/protocol-buffers/.
HISTORY
See the HISTORY file in the sudo distribution
(https://www.sudo.ws/history.html) for a brief history of sudo.
AUTHORS
Many people have worked on sudo over the years; this version consists
of code written primarily by:
Todd C. Miller
See the CONTRIBUTORS file in the sudo distribution
(https://www.sudo.ws/contributors.html) for an exhaustive list of
people who have contributed to sudo.
BUGS
If you feel you have found a bug in sudo, please submit a bug report at
https://bugzilla.sudo.ws/
SUPPORT
Limited free support is available via the sudo-users mailing list, see
https://www.sudo.ws/mailman/listinfo/sudo-users to subscribe or search
the archives.
DISCLAIMER
sudo is provided “AS IS” and any express or implied warranties,
including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose are disclaimed.
See the LICENSE file distributed with sudo or
https://www.sudo.ws/license.html for complete details.
Sudo 1.9.5p2 November 6, 2020 SUDO_LOGSRV.PROTO(4)