svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
solaris(7)
so...s(7)Standards, Environments, Macros, Character Sets, and miscellansyo...s(7)
NAME
solaris - solaris branded zone
DESCRIPTION
The solaris brand uses the branded zones framework described in
brands(7) to run zones installed with the same software that is in the
global zone. The solaris branded zone is the default brand and is also
known as the native zone. The system software must always be in sync
with the global zone when using this brand. The system software pack‐
ages within the zone are managed using the image packaging system.
Configuration and Administration
Zone configurations for solaris branded zones are created and modified
with the zonecfg(8) utility. The zoneadm(8) utility is used to install
Oracle Solaris from the global zone's pkg(7) publisher, and also to
clone and further manipulate such zones.
The solaris brand supports the whole root non-global zone model. All of
the required system software and any additional packages are installed
into the private file systems of the zone. The zone must reside on its
own zfs(8) dataset and only ZFS is supported. The ZFS dataset is cre‐
ated automatically when the zone is installed or attached. If a ZFS
dataset cannot be created, the zone is not installed or attached.
The following zonecfg(8) resources and properties are not supported by
the solaris brand:
autoshutdown=suspend
anet:id
device:id
net:id
virtual-cpu
anet:mac
ib-vhca
ib-vhca:port
capped-memory:pagesize
capped-memory:pagesize-policy
There are specific defaults for properties supported for solaris brand
as listed below:
Resource Property Default Value
global zonepath /system/zones/%{zonename}
autoboot false
global-time false
ip-type exclusive
auto-shutdown shutdown
net configure-allowed-address true
anet mac-address auto
lower-link auto
link-protection mac-nospoof
The following zonecfg(8) resources and properties are supported by the
live zone reconfiguration for solaris brand:
anet (with exceptions stated below)
capped-memory
dedicated-cpu
device
fs
net (with exceptions stated below)
pool
scheduling-class
zone.* rctls
dataset
The following zonecfg(8) resources and properties are not supported by
the live zone reconfiguration for solaris brand:
anet:allowed-address
anet:configure-allowed-address
anet:defrouter
anet:evs
anet:vport
file-mac-profile
fs-allowed
hostid
limitpriv
global-time
net:allowed-address
net:configure-allowed-address
net:defrouter
npiv
rootzpool
tenant
zpool
Any changes made to the listed unsupported resources and properties in
the persistent configuration will be ignored by the live zone reconfig‐
uration if they are applied to the running zone.
Any attempts to modify the listed unsupported resources and properties
in the live configuration will be refused.
For the list of this brand's specific subcommand options, see its
Brand-Specific section in zoneadm(8).
Cold Migration
solaris branded zones can be cold migrated to compatible hosts by using
the zoneadm migrate command, as described in the zoneadm(8) man page.
For cold migration to work, the same services and packages must be con‐
figured as for the solaris-kz(7) brand cold migration.
Only zones on shared storage may be migrated. Supported storage URI
types for migration are iscsi and lu.
Auxiliary State
The following auxiliary state (as shown by zoneadm list -is) is defined
for this brand:
no-config The zone is known to the system but its configuration is
missing. State of the zone is always incomplete.
EXAMPLES
Example 1 Conversion of a Global Zone to a solaris Zone
The following example shows how to create an archive of a global zone,
then use that archive to configure and install a non-global zone. The
installation process transforms the image of a global zone such that it
can work as a non-global zone. This process is commonly referred to as
P2V (physical to virtual).
To ensure that the data in the archive does not become stale, applica‐
tions running in the source zone should be stopped or the zone itself
should be shut down before the archive is created. If neither of these
is done, it may become necessary to synchronize application data after
the zone is installed.
First, create a recovery archive of the source system. This assumes the
source system has no non-global zones installed.
web-1# archiveadm create --recovery /net/images/web-1.uar
Next, configure the zone on the target system using the configuration
stored in the archive. It may be necessary to further customize it. See
examples in zonecfg(8).
t4-1# zonecfg -z web-1
Use 'create' to begin configuring a new zone.
zonecfg:web-1> create -a /net/images/web-1.uar
zonecfg:web-1> set zonepath=/zones/web-1
zonecfg:web-1> exit
If there is a preference for not using the interactive mode, you can
use the following command:
t4-1# zonecfg -z web-1 "create -a /net/images/web-1.uar; \
set zonepath=/zones/web-1"
Finally, install the zone from the archive.
t4-1# zoneadm -z web-1 install -a /net/images/web-1.uar
If both the source system and newly installed zone have the same IP ad‐
dress or have other potential conflicts, be sure that only one of them
is running at a time.
Example 2 Zone Migration Using a Unified Archive
To ensure that the data in the archive does not become stale, it is
suggested that applications on the source zone are stopped or the zone
is shut down before creating the archive. If this is not done, it may
be necessary to synchronize application data after the zone is in‐
stalled.
First, create a recovery archive of the zone. This is best performed
from the global zone. If it is performed within the zone, the zone will
not be able to be configured from the archive.
t4-1# archiveadm create -r -z web-1 /net/images/v2v/web-1.uar
Next, configure the zone on the target system using the archive.
t4-2# zonecfg -z web-1 create -a /net/images/v2v/web-1.uar
Finally, install the zone from the archive.
t4-2# zoneadm -z web-1 install -a /net/images/v2v/web-1.uar
Be sure to shutdown the zone on the source system before booting it on
the target system.
ATTRIBUTES
See attributes(7) for a description of the following attributes:
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE TYPEAT‐
TRIBUTE VALUE _ Availabilitysystem/zones/brand/brand-solaris _ Inter‐
face StabilityUncommitted
SEE ALSO
brands(7), solaris-kz(7), solaris10(7), zones(7), archiveadm(8),
zfs(8), zoneadm(8), zonecfg(8)
Oracle Solaris 11.4 29 Aug 2025 so...s(7)