개요

• 솔라나라에 설명된 어플리케이션에 대해 맨 페이지를 찾아 출력한다.
• MAN 페이지에 대한 설명은 윈디하나의 솔라나라: MAN 페이지을 참고하자.
• svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.

scsi_arq_status(9s)

scsi_arq_status(9S)     Kernel & Driver Data Structures    scsi_arq_status(9S)

NAME
       scsi_arq_status - SCSI auto request sense structure

SYNOPSIS
       #include <sys/scsi/scsi.h>

INTERFACE LEVEL
       Solaris DDI specific (Solaris DDI)

DESCRIPTION
       When  auto  request  sense has been enabled using scsi_ifsetcap(9F) and
       the "auto-rqsense" capability, the target driver must allocate a status
       area in the SCSI packet structure for the auto request sense  structure
       (see  scsi_pkt(9S)).  In the event of a check  condition, the transport
       layer automatically executes a request sense command.  This  check  en‐
       sures  that  the  request sense information does not get lost. The auto
       request sense structure supplies the SCSI status of the  original  com‐
       mand,  the  transport  information pertaining to the request sense com‐
       mand, and the request sense data.

STRUCTURE MEMBERS
         struct scsi_status       sts_status;          /* SCSI status */
         struct scsi_status       sts_rqpkt_status;    /* SCSI status of
                                                          request sense cmd */
         uchar_t                  sts_rqpkt_reason;    /* reason completion */
         uchar_t                  sts_rqpkt_resid;     /* residue */
         uint_t                   sts_rqpkt_state;     /* state of command */
         uint_t                   sts_rqpkt_statistics;/* statistics */
         struct scsi_extended_sense sts_sensedata;      /* actual sense data */



       sts_status is the SCSI status of the original command.  If  the  status
       indicates  a check  condition, the transport layer might have performed
       an auto request sense command.


       sts_rqpkt_status is the SCSI  status  of  the  request  sense  command.
       sts_rqpkt_reason is the completion reason of the request sense command.
       If  the reason is not CMD_CMPLT, then the request sense command did not
       complete normally.


       sts_rqpkt_resid is the residual count of the data  transfer  and  indi‐
       cates the number of data bytes that have not been transferred. The auto
       request  sense  command  requests  SENSE_LENGTH  bytes  by  default. If
       PKT_XARQ is specified in scsi_init_pkt(9F), the  requested  sense  data
       length will be (statuslen - offsetof(struct scsi_arq_status, sts_sense‐
       data))   bytes   where   statuslen   is   the   parameter  passed  into
       scsi_init_pkt(9F),   or    (scsi_pkt.pkt_scblen    -    offsetof(struct
       scsi_arq_status,  sts_sensedata))  bytes  if tran_setup_pkt(9E) is sup‐
       ported.


       sts_rqpkt_state has bit positions representing the five most  important
       statuses that a SCSI command can go obtain.


       sts_rqpkt_statistics  maintains transport-related statistics of the re‐
       quest sense command.


       sts_sensedata contains the actual sense data if the request sense  com‐
       mand completed normally.

SEE ALSO
       scsi_ifgetcap(9F),      scsi_init_pkt(9F),     scsi_extended_sense(9S),
       scsi_pkt(9S)


       Writing Device Drivers in Oracle Solaris 11.4

Oracle Solaris 11.4               23 Jul 2020              scsi_arq_status(9S)