inetadm(1m) 맨 페이지 - 윈디하나의 솔라나라

개요

섹션
맨 페이지 이름
검색(S)

inetadm(1m)

System Administration Commands                                     inetadm(1M)



NAME
       inetadm - observe or configure inetd-controlled services

SYNOPSIS
       inetadm


       inetadm -?


       inetadm -p


       inetadm -l {FMRI | pattern}


       inetadm -e {FMRI | pattern}


       inetadm -d {FMRI | pattern}


       inetadm -m {FMRI | pattern}... {name=value}...


       inetadm -M {name=value}...


DESCRIPTION
       The  inetadm utility provides the following capabilities for inetd-man‐
       aged SMF services:

           o      Provides a list of all such services installed.

           o      Lists the services' properties and values.

           o      Allows enabling and disabling of services.

           o      Allows modification of the services'property values, as well
                  as the default values provided by inetd.


       See smf(5) for a description of an SMF service.


       With  no arguments, inetadm lists all services under inetd(1M) control,
       including such attributes as their current run state and whether or not
       they are enabled.

OPTIONS
       For options taking one or more FMRI operands (see smf(5) for a descrip‐
       tion of an FMRI), if the operand specifies a service (instead of a ser‐
       vice  instance),  and  that service has only a single instance, inetadm
       operates on that instance.


       If a service name is supplied and it contains more than  one  instances
       or  a  pattern is supplied and and it matches more than one instance, a
       warning message is displayed and that operand is ignored.


       For those options taking name=value parameters, a description  of  each
       of  the possible names and the allowed values is found in the inetd(1M)
       man page.


       The following options are supported:

       -?

           Display a usage message.


       -p

           Lists all default inet service property values provided by inetd in
           the  form  of name=value pairs. If the value is of boolean type, it
           is listed as TRUE or FALSE.


       -l {FMRI | pattern}...

           List  all  properties  for  the  specified  service  instances   as
           name=value  pairs.  In addition, if the property value is inherited
           from the default value provided by inetd, the  name=value  pair  is
           identified by the token (default). Property inheritance occurs when
           properties do not have a specified service instance default.


       -e {FMRI | pattern}...

           Enable the specified service instances.


       -d {FMRI | pattern}...

           Disable the specified service instances.


       -m {FMRI | pattern}...{name=value}...

           Change the values of the specified  properties  of  the  identified
           service instances. Properties are specified as whitespace-separated
           name=value pairs. To remove an instance-specific value  and  accept
           the default value for a property, simply specify the property with‐
           out a value, for example, name= .


       -M {name=value}...

           Change the values of the specified inetd default properties.  Prop‐
           erties are specified as whitespace-separated name=value pairs.


EXAMPLES
       Example 1 Displaying Properties for a Service


       The following command displays the properties for the spray service.


         # inetadm -l network/rpc/spray:default
         SCOPE    NAME=VALUE
                  name="sprayd"
                  endpoint_type="tli"
                  proto="datagram_v"
                  isrpc=TRUE
                  rpc_low_version=1
                  rpc_high_version=1
                  wait=TRUE
                  exec="/usr/lib/netsvc/spray/rpc.sprayd"
                  user="root"
         default  bind_addr=""
         default  bind_fail_max=-1
         default  bind_fail_interval=-1
         default  max_con_rate=-1
         default  max_copies=-1
         default  con_rate_offline=-1
         default  failrate_cnt=40
         default  failrate_interval=60
         default  inherit_env=TRUE
         default  tcp_trace=FALSE
         default  tcp_wrappers=FALSE
         default  connection_backlog=10


       Example 2 Displaying Default Properties


       The following command displays default properties.


         # inetadm -p
         NAME=VALUE
         bind_addr=""
         bind_fail_max=-1
         bind_fail_interval=-1
         max_con_rate=-1
         max_copies=-1
         con_rate_offline=-1
         failrate_cnt=40
         failrate_interval=60
         inherit_env=TRUE
         tcp_trace=FALSE
         tcp_wrappers=FALSE
         default  connection_backlog=10


       Example 3 Changing Property Values for a Service


       The  following  command  changes rpc_high_version to 3 and tcp_trace to
       TRUE for the spray service.


         # inetadm -m network/rpc/spray:default \
                  rpc_high_version=3 tcp_trace=TRUE
         # inetadm -l network/rpc/spray:default
         SCOPE    NAME=VALUE
                  name="sprayd"
                  endpoint_type="tli"
                  proto="datagram_v"
                  isrpc=TRUE
                  rpc_low_version=1
                  rpc_high_version=3
                  wait=TRUE
                  exec="/usr/lib/netsvc/spray/rpc.sprayd"
                  user="root"
         default  bind_addr=""
         default  bind_fail_max=-1
         default  bind_fail_interval=-1
         default  max_con_rate=-1
         default  max_copies=-1
         default  con_rate_offline=-1
         default  failrate_cnt=40
         default  failrate_interval=60
         default  inherit_env=TRUE
                  tcp_trace=TRUE
         default  tcp_wrappers=FALSE
         default  connection_backlog=10


EXIT STATUS
       The following exit values are returned:

       0    Operation completed successfully.


       1    A fatal error occurred. An accompanying error message will provide
            further information.


       2    Invalid arguments were supplied, such as an ambiguous service FMRI
            or pattern.


ATTRIBUTES
       See attributes(5) for descriptions of the following attributes:




       tab()  box;  cw(2.75i)  |cw(2.75i)  lw(2.75i)   |lw(2.75i)   ATTRIBUTE
       TYPEATTRIBUTE  VALUE _ Availabilitysystem/core-os _ Interface Stabil‐
       ityCommitted


SEE ALSO
       inetd(1M), svccfg(1M), attributes(5), smf(5)



SunOS 5.11                        5 Jul 2007                       inetadm(1M)
맨 페이지 내용의 저작권은 맨 페이지 작성자에게 있습니다.
RSS ATOM XHTML 5 CSS3