curl_easy_getinfo(3) 맨 페이지 - 윈디하나의 솔라나라

개요

섹션
맨 페이지 이름
검색(S)

curl_easy_getinfo(3)

/usr/local/bin/rman를 실행할 수 없습니다

curl_easy_getinfo(3)       Library Functions Manual       curl_easy_getinfo(3)

NAME
       curl_easy_getinfo - extract information from a curl handle

SYNOPSIS
       #include <curl/curl.h>

       CURLcode curl_easy_getinfo(CURL *curl, CURLINFO info, ... );

DESCRIPTION
       Get the info kept in the curl handle. The third argument MUST be point‐
       ing to the specific type of the used option which is documented in each
       man  page of the info option. The data is stored accordingly and can be
       relied upon only if this function returns CURLE_OK. Use  this  function
       after a performed transfer if you want to get transfer related data.

       You  should  not free the memory returned by this function unless it is
       explicitly mentioned below.

OPTIONS
       The following information can be extracted:

       CURLINFO_ACTIVESOCKET
              The session's active socket. See CURLINFO_ACTIVESOCKET(3)

       CURLINFO_APPCONNECT_TIME
              The time it took from the start until the SSL  connect/handshake
              with the remote host was completed as a double in number of sec‐
              onds.

       CURLINFO_APPCONNECT_TIME_T
              The  time it took from the start until the SSL connect/handshake
              with the remote host was completed in  number  of  microseconds.
              (Added in 7.60.0) See CURLINFO_APPCONNECT_TIME_T(3)

       CURLINFO_CAINFO
              Get    the    default    value    for   CURLOPT_CAINFO(3).   See
              CURLINFO_CAINFO(3)

       CURLINFO_CAPATH
              Get the default value for CURLOPT_CAPATH(3).  See  CURLINFO_CAP‐
              ATH(3)

       CURLINFO_CERTINFO
              Certificate chain. See CURLINFO_CERTINFO(3)

       CURLINFO_CONDITION_UNMET
              Whether  or not a time conditional was met or 304 HTTP response.
              See CURLINFO_CONDITION_UNMET(3)

       CURLINFO_CONNECT_TIME
              The time it took from the start until the connect to the  remote
              host  (or  proxy)  was completed. As a double. See CURLINFO_CON‐
              NECT_TIME(3)

       CURLINFO_CONNECT_TIME_T
              The time it took from the start until the connect to the  remote
              host   (or   proxy)   was   completed.   In   microseconds.  See
              CURLINFO_CONNECT_TIME_T(3).

       CURLINFO_CONN_ID
              The ID of the last connection used by the  transfer.  (Added  in
              8.2.0) See CURLINFO_CONN_ID(3)

       CURLINFO_CONTENT_LENGTH_DOWNLOAD
              (Deprecated) Content length from the Content-Length header.  See
              CURLINFO_CONTENT_LENGTH_DOWNLOAD(3)

       CURLINFO_CONTENT_LENGTH_DOWNLOAD_T
              Content    length   from   the   Content-Length   header.    See
              CURLINFO_CONTENT_LENGTH_DOWNLOAD_T(3)

       CURLINFO_CONTENT_LENGTH_UPLOAD
              (Deprecated) Upload size. See CURLINFO_CONTENT_LENGTH_UPLOAD(3)

       CURLINFO_CONTENT_LENGTH_UPLOAD_T
              Upload size. See CURLINFO_CONTENT_LENGTH_UPLOAD_T(3)

       CURLINFO_CONTENT_TYPE
              Content type from the Content-Type: header. We  recommend  using
              curl_easy_header(3) instead. See CURLINFO_CONTENT_TYPE(3)

       CURLINFO_COOKIELIST
              List of all known cookies. See CURLINFO_COOKIELIST(3)

       CURLINFO_EARLYDATA_SENT_T
              Amount  of TLS early data sent (in number of bytes) when CURLSS‐
              LOPT_EARLYDATA is enabled.

       CURLINFO_EFFECTIVE_METHOD
              Last used HTTP method. See CURLINFO_EFFECTIVE_METHOD(3)

       CURLINFO_EFFECTIVE_URL
              Last used URL. See CURLINFO_EFFECTIVE_URL(3)

       CURLINFO_FILETIME
              Remote time of the retrieved document. See CURLINFO_FILETIME(3)

       CURLINFO_FILETIME_T
              Remote  time  of  the  retrieved  document.  See  CURLINFO_FILE‐
              TIME_T(3)

       CURLINFO_FTP_ENTRY_PATH
              The   entry  path  after  logging  in  to  an  FTP  server.  See
              CURLINFO_FTP_ENTRY_PATH(3)

       CURLINFO_HEADER_SIZE
              Number   of    bytes    of    all    headers    received.    See
              CURLINFO_HEADER_SIZE(3)

       CURLINFO_HTTPAUTH_AVAIL
              Available       HTTP       authentication      methods.      See
              CURLINFO_HTTPAUTH_AVAIL(3)

       CURLINFO_HTTPAUTH_USED
              Used HTTP authentication method. See CURLINFO_HTTPAUTH_USED(3)

       CURLINFO_HTTP_CONNECTCODE
              Last proxy CONNECT  response  code.  See  CURLINFO_HTTP_CONNECT‐
              CODE(3)

       CURLINFO_HTTP_VERSION
              The  http version used in the connection. See CURLINFO_HTTP_VER‐
              SION(3)

       CURLINFO_LASTSOCKET
              (Deprecated) Last socket used. See CURLINFO_LASTSOCKET(3)

       CURLINFO_LOCAL_IP
              Source IP address  of  the  last  connection.  See  CURLINFO_LO‐
              CAL_IP(3)

       CURLINFO_LOCAL_PORT
              Source  port  number  of  the  last connection. See CURLINFO_LO‐
              CAL_PORT(3)

       CURLINFO_NAMELOOKUP_TIME
              Time from start until name resolving completed as a double.  See
              CURLINFO_NAMELOOKUP_TIME(3)

       CURLINFO_NAMELOOKUP_TIME_T
              Time  from start until name resolving completed in number of mi‐
              croseconds. See CURLINFO_NAMELOOKUP_TIME_T(3)

       CURLINFO_NUM_CONNECTS
              Number of new successful connections used for previous transfer.
              See CURLINFO_NUM_CONNECTS(3)

       CURLINFO_OS_ERRNO
              The errno from the last failure to connect. See  CURLINFO_OS_ER‐
              RNO(3)

       CURLINFO_POSTTRANSFER_TIME_T
              The  time  it took from the start until the last byte is sent by
              libcurl.  In microseconds. (Added in 8.10.0) See  CURLINFO_POST‐
              TRANSFER_TIME_T(3)

       CURLINFO_PRETRANSFER_TIME
              The  time it took from the start until the file transfer is just
              about to begin. This includes all pre-transfer commands and  ne‐
              gotiations  that  are specific to the particular protocol(s) in‐
              volved. See CURLINFO_PRETRANSFER_TIME(3)

       CURLINFO_PRETRANSFER_TIME_T
              The time it took from the start until the file transfer is  just
              about  to begin. This includes all pre-transfer commands and ne‐
              gotiations that are specific to the particular  protocol(s)  in‐
              volved. In microseconds. See CURLINFO_PRETRANSFER_TIME_T(3)

       CURLINFO_PRIMARY_IP
              Destination IP address of the last connection. See CURLINFO_PRI‐
              MARY_IP(3)

       CURLINFO_PRIMARY_PORT
              Destination  port  of  the  last  connection.  See CURLINFO_PRI‐
              MARY_PORT(3)

       CURLINFO_PRIVATE
              User's private data pointer. See CURLINFO_PRIVATE(3)

       CURLINFO_PROTOCOL
              (Deprecated)  The  protocol  used  for   the   connection.   See
              CURLINFO_PROTOCOL(3)

       CURLINFO_PROXYAUTH_AVAIL
              Available  HTTP proxy authentication methods. See CURLINFO_PROX‐
              YAUTH_AVAIL(3)

       CURLINFO_PROXYAUTH_USED
              Used  HTTP  proxy  authentication  methods.  See  CURLINFO_PROX‐
              YAUTH_USED(3)

       CURLINFO_PROXY_ERROR
              Detailed proxy error. See CURLINFO_PROXY_ERROR(3)

       CURLINFO_PROXY_SSL_VERIFYRESULT
              Proxy       certificate       verification      result.      See
              CURLINFO_PROXY_SSL_VERIFYRESULT(3)

       CURLINFO_QUEUE_TIME_T
              The time during which the transfer was held in a  waiting  queue
              before it could start for real in number of microseconds. (Added
              in 8.6.0) See CURLINFO_QUEUE_TIME_T(3)

       CURLINFO_REDIRECT_COUNT
              Total number of redirects that were followed. See CURLINFO_REDI‐
              RECT_COUNT(3)

       CURLINFO_REDIRECT_TIME
              The  time it took for all redirection steps include name lookup,
              connect, pretransfer and transfer before final  transaction  was
              started.  So,  this  is  zero if no redirection took place. As a
              double. See CURLINFO_REDIRECT_TIME(3)

       CURLINFO_REDIRECT_TIME_T
              The time it took for all redirection steps include name  lookup,
              connect,  pretransfer  and transfer before final transaction was
              started. So, this is zero if no redirection took place. In  num‐
              ber of microseconds. See CURLINFO_REDIRECT_TIME_T(3)

       CURLINFO_REDIRECT_URL
              URL a redirect would take you to, had you enabled redirects. See
              CURLINFO_REDIRECT_URL(3)

       CURLINFO_REFERER
              Referrer header. See CURLINFO_REFERER(3)

       CURLINFO_REQUEST_SIZE
              Number   of   bytes  sent  in  the  issued  HTTP  requests.  See
              CURLINFO_REQUEST_SIZE(3)

       CURLINFO_RESPONSE_CODE
              Last received response code. See CURLINFO_RESPONSE_CODE(3)

       CURLINFO_RETRY_AFTER
              The value from the Retry-After  header.  See  CURLINFO_RETRY_AF‐
              TER(3)

       CURLINFO_RTSP_CLIENT_CSEQ
              The    RTSP   client   CSeq   that   is   expected   next.   See
              CURLINFO_RTSP_CLIENT_CSEQ(3)

       CURLINFO_RTSP_CSEQ_RECV
              RTSP CSeq last received. See CURLINFO_RTSP_CSEQ_RECV(3)

       CURLINFO_RTSP_SERVER_CSEQ
              The   RTSP   server   CSeq   that   is   expected   next.    See
              CURLINFO_RTSP_SERVER_CSEQ(3)

       CURLINFO_RTSP_SESSION_ID
              RTSP session ID. See CURLINFO_RTSP_SESSION_ID(3)

       CURLINFO_SCHEME
              The scheme used for the connection. See CURLINFO_SCHEME(3)

       CURLINFO_SIZE_DOWNLOAD
              (Deprecated) Number of bytes downloaded. See CURLINFO_SIZE_DOWN‐
              LOAD(3)

       CURLINFO_SIZE_DOWNLOAD_T
              Number of bytes downloaded. See CURLINFO_SIZE_DOWNLOAD_T(3)

       CURLINFO_SIZE_UPLOAD
              (Deprecated)  Number  of  bytes  uploaded. See CURLINFO_SIZE_UP‐
              LOAD(3)

       CURLINFO_SIZE_UPLOAD_T
              Number of bytes uploaded. See CURLINFO_SIZE_UPLOAD_T(3)

       CURLINFO_SPEED_DOWNLOAD
              (Deprecated) Average download  speed.  See  CURLINFO_SPEED_DOWN‐
              LOAD(3)

       CURLINFO_SPEED_DOWNLOAD_T
              Average download speed. See CURLINFO_SPEED_DOWNLOAD_T(3)

       CURLINFO_SPEED_UPLOAD
              (Deprecated) Average upload speed. See CURLINFO_SPEED_UPLOAD(3)

       CURLINFO_SPEED_UPLOAD_T
              Average  upload  speed  in  number  of  bytes  per  second.  See
              CURLINFO_SPEED_UPLOAD_T(3)

       CURLINFO_SSL_ENGINES
              A list of OpenSSL crypto engines. See CURLINFO_SSL_ENGINES(3)

       CURLINFO_SSL_VERIFYRESULT
              Certificate  verification  result.  See   CURLINFO_SSL_VERIFYRE‐
              SULT(3)

       CURLINFO_STARTTRANSFER_TIME
              The time it took from the start until the first byte is received
              by libcurl.  As a double. See CURLINFO_STARTTRANSFER_TIME(3)

       CURLINFO_STARTTRANSFER_TIME_T
              The time it took from the start until the first byte is received
              by   libcurl.    In   microseconds.   See   CURLINFO_STARTTRANS‐
              FER_TIME_T(3)

       CURLINFO_TLS_SESSION
              (Deprecated) TLS session info that can be used for further  pro‐
              cessing.         See         CURLINFO_TLS_SESSION(3).        Use
              CURLINFO_TLS_SSL_PTR(3) instead.

       CURLINFO_TLS_SSL_PTR
              TLS session info that can be used for  further  processing.  See
              CURLINFO_TLS_SSL_PTR(3)

       CURLINFO_TOTAL_TIME
              Total time of previous transfer. See CURLINFO_TOTAL_TIME(3)

       CURLINFO_TOTAL_TIME_T
              Total time of previous transfer. See CURLINFO_TOTAL_TIME_T(3)

       CURLINFO_USED_PROXY
              Whether   the   proxy   was   used   (Added   in   8.7.0).   See
              CURLINFO_USED_PROXY(3)

       CURLINFO_XFER_ID
              The ID of the transfer. (Added in 8.2.0) See CURLINFO_XFER_ID(3)

TIMES
       An overview of the time values available from curl_easy_getinfo(3)

       curl_easy_perform()
           |
           |--QUEUE
           |--|--NAMELOOKUP
           |--|--|--CONNECT
           |--|--|--|--APPCONNECT
           |--|--|--|--|--PRETRANSFER
           |--|--|--|--|--|--POSTTRANSFER
           |--|--|--|--|--|--|--STARTTRANSFER
           |--|--|--|--|--|--|--|--TOTAL
           |--|--|--|--|--|--|--|--REDIRECT

        CURLINFO_QUEUE_TIME_T(3), CURLINFO_NAMELOOKUP_TIME_T(3),
        CURLINFO_CONNECT_TIME_T(3), CURLINFO_APPCONNECT_TIME_T(3),
        CURLINFO_PRETRANSFER_TIME_T(3), CURLINFO_POSTTRANSFER_TIME_T(3),
        CURLINFO_STARTTRANSFER_TIME_T(3), CURLINFO_TOTAL_TIME_T(3),
        CURLINFO_REDIRECT_TIME_T(3)

PROTOCOLS
       This functionality affects all supported protocols

EXAMPLE
       int main(void)
       {
         CURL *curl = curl_easy_init();
         if(curl) {
           CURLcode res;
           curl_easy_setopt(curl, CURLOPT_URL, "https://www.example.com/");
           res = curl_easy_perform(curl);

           if(CURLE_OK == res) {
             char *ct;
             /* ask for the content-type */
             res = curl_easy_getinfo(curl, CURLINFO_CONTENT_TYPE, &ct);

             if((CURLE_OK == res) && ct)
               printf("We received Content-Type: %s\n", ct);
           }

           /* always cleanup */
           curl_easy_cleanup(curl);
         }
       }

AVAILABILITY
       Added in curl 7.4.1

RETURN VALUE
       This function returns a CURLcode indicating success or error.

       CURLE_OK (0) means everything was OK, non-zero means an error occurred,
       see  libcurl-errors(3).  If   CURLOPT_ERRORBUFFER(3)   was   set   with
       curl_easy_setopt(3)  there  can be an error message stored in the error
       buffer when non-zero is returned.


ATTRIBUTES
       See attributes(7) for descriptions of the following attributes:

       box; cbp-1 | cbp-1 l | l .  ATTRIBUTE TYPE ATTRIBUTE VALUE = Availabil‐
       ity   web/curl = Stability Uncommitted

SEE ALSO
       curl_easy_setopt(3)



NOTES
       Source code for open source software components in Oracle  Solaris  can
       be found at https://www.oracle.com/downloads/opensource/solaris-source-
       code-downloads.html.

       This software was built from source available at:
       https://github.com/oracle/solaris-userland

       The original community source was downloaded from:
       https://curl.se/download/curl-8.17.0.tar.bz2

       Further information about this software can be found on the open source
       community website at http://curl.haxx.se/.

libcurl                           2025-12-01              curl_easy_getinfo(3)
맨 페이지 내용의 저작권은 맨 페이지 작성자에게 있습니다.
RSS ATOM XHTML 5 CSS3