CURLOPT_SSL_OPTIONS(3) 맨 페이지 - 윈디하나의 솔라나라

개요

섹션
맨 페이지 이름
검색(S)

CURLOPT_SSL_OPTIONS(3)

/usr/local/bin/rman를 실행할 수 없습니다

CURLOPT_SSL_OPTIONS(3)     Library Functions Manual     CURLOPT_SSL_OPTIONS(3)

NAME
       CURLOPT_SSL_OPTIONS - SSL behavior options

SYNOPSIS
       #include <curl/curl.h>

       CURLcode curl_easy_setopt(CURL *handle, CURLOPT_SSL_OPTIONS, long bitmask);

DESCRIPTION
       Pass  a  long  with a bitmask to tell libcurl about specific SSL behav‐
       iors. Available bits:

       CURLSSLOPT_ALLOW_BEAST
              Tells libcurl to not attempt to use any workarounds for a  secu‐
              rity  flaw  in  the SSL3 and TLS1.0 protocols. If this option is
              not used or this bit is set to 0, the SSL layer libcurl uses may
              use a work-around for this flaw although it might cause interop‐
              erability problems with some (older) SSL implementations.  WARN‐
              ING: avoiding this work-around lessens the security, and by set‐
              ting this option to 1 you ask for exactly that. This  option  is
              only supported for Secure Transport and OpenSSL.

       CURLSSLOPT_NO_REVOKE
              Tells libcurl to disable certificate revocation checks for those
              SSL backends where such behavior is present. This option is only
              supported for Schannel (the native Windows SSL library), with an
              exception  in  the  case  of Windows' Untrusted Publishers block
              list which it seems cannot be bypassed.

       CURLSSLOPT_NO_PARTIALCHAIN
              Tells libcurl to not accept "partial" certificate chains,  which
              it  otherwise does by default. This option fails the certificate
              verification if the chain ends with an intermediate  certificate
              and not with a root cert.

              Works  with  OpenSSL  and  its forks (LibreSSL, BoringSSL, etc).
              (Added in 7.68.0)

              Works with Schannel if the user specified certificates to verify
              the peer.  (Added in 8.15.0)

       CURLSSLOPT_REVOKE_BEST_EFFORT
              Tells libcurl to ignore certificate revocation checks in case of
              missing or offline distribution points for  those  SSL  backends
              where  such  behavior  is present. This option is only supported
              for Schannel (the native Windows SSL library). If combined  with
              CURLSSLOPT_NO_REVOKE,  the  latter  takes  precedence. (Added in
              7.70.0)

       CURLSSLOPT_NATIVE_CA
              Tell libcurl to use the operating system's native CA  store  for
              certificate verification. This option is independent of other CA
              certificate locations set at run time or build time. Those loca‐
              tions are searched in addition to the native CA store.

              Works  with  wolfSSL  on Windows, Linux (Debian, Ubuntu, Gentoo,
              Fedora, RHEL), macOS, Android and iOS  (added  in  8.3.0);  with
              GnuTLS  (added  in  8.5.0)  and  with OpenSSL and its forks (Li‐
              breSSL, BoringSSL, etc) on Windows (Added in 7.71.0).

              This works with rustls on Windows, macOS, Android  and  iOS.  On
              Linux  it is equivalent to using the Mozilla CA certificate bun‐
              dle. When used with rustls _only_ the native CA  store  is  con‐
              sulted,  not  other  locations  set  at  run time or build time.
              (Added in 8.13.0)

       CURLSSLOPT_AUTO_CLIENT_CERT
              Tell libcurl to automatically locate and use a  client  certifi‐
              cate  for authentication, when requested by the server. This op‐
              tion is only supported for Schannel (the native Windows SSL  li‐
              brary). Prior to 7.77.0 this was the default behavior in libcurl
              with Schannel. Since the server can request any certificate that
              supports  client  authentication  in the OS certificate store it
              could be a privacy violation and unexpected.  (Added in 7.77.0)

       CURLSSLOPT_EARLYDATA
              Tell libcurl to try sending application  data  as  TLS1.3  early
              data.  This option is supported for GnuTLS, wolfSSL, quictls and
              OpenSSL (but not BoringSSL or AWS-LC). It works on TCP and  QUIC
              connections  using  ngtcp2.   This option works on a best effort
              basis, in cases when it wasn't possible to send early  data  the
              request is resent normally post-handshake.  This option does not
              work  when  using  QUIC.  (Added in 8.11.0 for GnuTLS and 8.13.0
              for wolfSSL, quictls and OpenSSL)

DEFAULT
       0

PROTOCOLS
       This functionality affects all TLS based protocols: HTTPS, FTPS, IMAPS,
       POP3S, SMTPS etc.

       All TLS backends support this option.

EXAMPLE
       int main(void)
       {
         CURL *curl = curl_easy_init();
         if(curl) {
           CURLcode res;
           curl_easy_setopt(curl, CURLOPT_URL, "https://example.com/");
           /* weaken TLS only for use with silly servers */
           curl_easy_setopt(curl, CURLOPT_SSL_OPTIONS,
                            CURLSSLOPT_ALLOW_BEAST | CURLSSLOPT_NO_REVOKE);
           res = curl_easy_perform(curl);
           curl_easy_cleanup(curl);
         }
       }

HISTORY
       CURLSSLOPT_* macros became long types in 8.15.0, prior to this  version
       a long cast was necessary when passed to curl_easy_setopt(3).

AVAILABILITY
       Added in curl 7.25.0

RETURN VALUE
       curl_easy_setopt(3) returns a CURLcode indicating success or error.

       CURLE_OK (0) means everything was OK, non-zero means an error occurred,
       see libcurl-errors(3).


ATTRIBUTES
       See attributes(7) for descriptions of the following attributes:

       box; cbp-1 | cbp-1 l | l .  ATTRIBUTE TYPE ATTRIBUTE VALUE = Availabil‐
       ity   web/curl = Stability Uncommitted

SEE ALSO
       CURLOPT_PROXY_SSL_OPTIONS(3),   CURLOPT_SSLVERSION(3),  CURLOPT_SSL_CI‐
       PHER_LIST(3)



NOTES
       Source code for open source software components in Oracle  Solaris  can
       be found at https://www.oracle.com/downloads/opensource/solaris-source-
       code-downloads.html.

       This software was built from source available at:
       https://github.com/oracle/solaris-userland

       The original community source was downloaded from:
       https://curl.se/download/curl-8.17.0.tar.bz2

       Further information about this software can be found on the open source
       community website at http://curl.haxx.se/.

libcurl                           2025-12-01            CURLOPT_SSL_OPTIONS(3)
맨 페이지 내용의 저작권은 맨 페이지 작성자에게 있습니다.
RSS ATOM XHTML 5 CSS3