in.tftpd(8) 맨 페이지 - 윈디하나의 솔라나라

개요

섹션
맨 페이지 이름
검색(S)

in.tftpd(8)

System Administration Commands                                     in.tftpd(8)



NAME
       in.tftpd, tftpd - Internet Trivial File Transfer Protocol server

SYNOPSIS
       in.tftpd [-d] [-T rexmtval] [-s] [homedir]

DESCRIPTION
       tftpd is a server that supports the Internet Trivial File Transfer Pro‐
       tocol (TFTP).


       Before responding to a request, the server attempts to change its  cur‐
       rent directory to homedir; the default directory is /tftpboot.


       The  use  of tftp does not require an account or password on the remote
       system. Due to the lack of authentication  information,  in.tftpd  will
       allow only publicly readable files to be accessed. Files may be written
       only if they already exist and are publicly writable.  Note  that  this
       extends  the concept of "public" to include all users on all hosts that
       can be reached through the network. This may not be appropriate on  all
       systems, and its implications should be considered before enabling this
       service.


       in.tftpd runs with the user ID and group ID set to [GU]ID_NOBODY  under
       the  assumption  that no files exist with that owner or group. However,
       nothing checks this assumption or enforces this restriction.

OPTIONS
       -d

           Debug. When specified it sets the SO_DEBUG socket option.


       -s

           Secure. When specified, the directory change to homedir  must  suc‐
           ceed. The daemon also changes its root directory to homedir.


       -T rexmtval

           Specifies  the value of the retransmission timeout in seconds. This
           also affects the maximum session timeout in that the latter is  set
           to five times the retransmission timeout value.


USAGE
       The in.tftpd server is IPv6-enabled. See ip6(4P).


       in.tftpd supports transfers of greater than 32 MB, per RFC 2348.

ATTRIBUTES
       See attributes(7) for descriptions of the following attributes:


       tab()  box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE TYPEAT‐
       TRIBUTE VALUE _ Availabilityservice/network/tftp


SEE ALSO
       svcs(1),  tftp(1),  ip6(4P),   netconfig(5),   attributes(7),   smf(7),
       inetadm(8), inetd(8), svcadm(8)


       Malkin, G. and Harkin, A. RFC 2347, TFTP Option Extension. The Internet
       Society. May 1998


       Malkin, G. and Harkin, A. RFC 2348, TFTP Blocksize Option. The Internet
       Society. May 1998


       Malkin,  G. and Harkin, A. RFC 2349, TFTP Timeout Interval and Transfer
       Size Options. The Internet Society. May 1998


       Sollins, K.R. RFC 1350, The TFTP Protocol (Revision 2). Network Working
       Group. July 1992.

NOTES
       The  tftpd  server  only  acknowledges the transfer size option that is
       sent with a read request when the octet transfer mode is specified.


       The in.tftpd.8 service is managed by the service  management  facility,
       smf(7), under the service identifier:

         svc:/network/tftp/udp6:default





       Administrative actions on this service, such as enabling, disabling, or
       requesting restart, can be performed  using  svcadm(8).  Responsibility
       for  initiating  and  restarting this service is delegated to inetd(8).
       Use inetadm(8) to make configuration changes and to view  configuration
       information for this service. The service's status can be queried using
       the svcs(1) command.



Oracle Solaris 11.4               3 Oct 2012                       in.tftpd(8)
맨 페이지 내용의 저작권은 맨 페이지 작성자에게 있습니다.
RSS ATOM XHTML 5 CSS3