svcadm(1M)을 검색하려면 섹션에서 1M 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
fp(4d)
Device Drivers & /dev files fp(4D)
NAME
fp - Fibre Channel port driver
DESCRIPTION
The fp driver is a Fibre Channel nexus driver that enables Fibre Chan‐
nel topology discovery, device discovery, Fibre Channel adapter port
management and other capabilities through well-defined Fibre Channel
adapter driver interfaces.
The fp driver requires the presence of a fabric name server in fabric
and public loop topologies to discover Fibre Channel devices. In pri‐
vate loop topologies, the driver discovers devices by performing PLOGI
to all valid AL_PAs, provided that devices do not participate in LIRP
and LILP stages of loop initialization. The fp driver also discovers
devices in N_Port point-to-point topologies.
CONFIGURATION
The fp driver is configured by defining properties in the fp.conf file.
Note that you must reboot the system to have any changes you make to
fp.conf take effect. The fp driver supports the following properties:
mpxio-disable
Solaris I/O multipathing is enabled or disabled on Fibre Channel
devices with the mpxio-disable property. Specifying mpxio-dis‐
able="no" activates I/O multipathing, while mpxio-disable="yes"
disables the feature. Solaris I/O multipathing may be enabled or
disabled on a per port basis. Per port settings override the global
setting for the specified ports. The following example shows how to
disable multipathing on port 0 whose parent is
/pci@8,600000/SUNW,qlc@4:
name="fp" parent="/pci@8,600000/SUNW,qlc@4" port=0
mpxio-disable="yes";
pwwn-lun-blacklist
Allows you to specify target port WWNs and LUN numbers you do not
want configured. LUN numbers are interpreted as decimals. White
spaces and commas (',') can be used in the list of LUN numbers.
#
# pwwn-lun-blacklist=
# "target-port-wwn,lun-list"
#
# To prevent LUNs 1 and 2 from being configured for target
# port 510000f010fd92a1 and target port 510000e012079df1, set:
#
# pwwn-lun-blacklist=
# "510000f010fd92a1,1,2",
# "510000e012079df1,1,2";
#
FILES
/kernel/drv/amd64/fp 64-bit ELF kernel driver (x86)
/kernel/drv/sparcv9/fp 64-bit ELF kernel driver (SPARC)
/kernel/drv/fp.conf fp driver configuration file.
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE TYPEAT‐
TRIBUTE VALUE _ mpxio-disableUncommitted _ Availabilitysystem/io/fc/fc-
port
SEE ALSO
fcp(4D), fctl(4D), scsi_vhci(4D), driver.conf(5), attributes(7),
cfgadm_fp(8), prtconf(8), stmsboot(8)
Writing Device Drivers in Oracle Solaris 11.4
Fibre Channel Physical and Signaling Interface (FC-PH) ANSI X3.230:
1994
Fibre Channel Generic Services (FC-GS-2) Project 1134-D
Fibre Channel Arbitrated Loop (FC-AL) ANSI X3.272-1996
Fibre Channel Protocol for SCSI (FCP) ANSI X3.269-1996
SCSI-3 Architecture Model (SAM) Fibre Channel Private Loop SCSI Direct
Attach (FC-PLDA) ANSI X3.270-1996
SCSI Direct Attach (FC-PLDA) ANSI X3.270-1996
SCSI Direct Attach (FC-PLDA) NCITS TR-19:1998
Fabric Loop Attachment (FC-FLA), NCITS TR-20:1998
NOTES
In N_Port point-to-point topologies, FCP error recovery does not work
across events such as link bounce/cable pull. I/O to devices with
FCP-2/FCP-3 support (for example, FC tape drives) will be disrupted by
such events.
Oracle Solaris 11.4 11 May 2021 fp(4D)