svcadm(1M)을 검색하려면 섹션에서 1M 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
elf(3elf)
elf(3ELF) ELF Library Functions elf(3ELF)
NAME
elf - object file access library
SYNOPSIS
cc [ flag ... ] file ... -lelf [ library ... ]
#include <libelf.h>
DESCRIPTION
Functions in the ELF access library let a program manipulate ELF (Exe‐
cutable and Linking Format) object files, archive files, and archive
members. The header provides type and function declarations for all
library services.
Programs communicate with many of the higher-level routines using an
ELF descriptor. That is, when the program starts working with a file,
elf_begin(3ELF) creates an ELF descriptor through which the program
manipulates the structures and information in the file. These ELF
descriptors can be used both to read and to write files. After the pro‐
gram establishes an ELF descriptor for a file, it may then obtain sec‐
tion descriptors to manipulate the sections of the file (see
elf_getscn(3ELF)). Sections hold the bulk of an object file's real
information, such as text, data, the symbol table, and so on. A section
descriptor belongs to a particular ELF descriptor, just as a section
belongs to a file. Finally, data descriptors are available through
section descriptors, allowing the program to manipulate the information
associated with a section. A data descriptor belongs to a section
descriptor.
Descriptors provide private handles to a file and its pieces. In other
words, a data descriptor is associated with one section descriptor,
which is associated with one ELF descriptor, which is associated with
one file. Although descriptors are private, they give access to data
that may be shared. Consider programs that combine input files, using
incoming data to create or update another file. Such a program might
get data descriptors for an input and an output section. It then could
update the output descriptor to reuse the input descriptor's data. That
is, the descriptors are distinct, but they could share the associated
data bytes. This sharing avoids the space overhead for duplicate buf‐
fers and the performance overhead for copying data unnecessarily.
File Classes
ELF provides a framework in which to define a family of object files,
supporting multiple processors and architectures. An important distinc‐
tion among object files is the class, or capacity, of the file. The
32-bit class supports architectures in which a 32-bit object can repre‐
sent addresses, file sizes, and so on, as in the following:
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) NamePurpose _
Elf32_AddrUnsigned address _ Elf32_HalfUnsigned medium integer _
Elf32_OffUnsigned file offset _ Elf32_SwordSigned large integer _
Elf32_WordUnsigned large integer _ unsigned charUnsigned small integer
The 64−bit class works the same as the 32−bit class, substituting 64
for 32 as necessary. Other classes will be defined as necessary, to
support larger (or smaller) machines. Some library services deal only
with data objects for a specific class, while others are class-indepen‐
dent. To make this distinction clear, library function names reflect
their status, as described below.
Data Representation
Conceptually, two parallel sets of objects support cross compilation
environments. One set corresponds to file contents, while the other set
corresponds to the native memory image of the program manipulating the
file. Type definitions supplied by the headers work on the native
machine, which may have different data encodings (size, byte order, and
so on) than the target machine. Although native memory objects should
be at least as big as the file objects (to avoid information loss),
they may be bigger if that is more natural for the host machine.
Translation facilities exist to convert between file and memory repre‐
sentations. Some library routines convert data automatically, while
others leave conversion as the program's responsibility. Either way,
programs that create object files must write file-typed objects to
those files; programs that read object files must take a similar view.
See elf32_xlatetof(3ELF) and elf32_fsize(3ELF) for more information.
Programs may translate data explicitly, taking full control over the
object file layout and semantics. If the program prefers not to have
and exercise complete control, the library provides a higher-level
interface that hides many object file details. elf_begin() and related
functions let a program deal with the native memory types, converting
between memory objects and their file equivalents automatically when
reading or writing an object file.
ELF Versions
Object file versions allow ELF to adapt to new requirements. Three
independent versions can be important to a program. First, an applica‐
tion program knows about a particular version by virtue of being com‐
piled with certain headers. Second, the access library similarly is
compiled with header files that control what versions it understands.
Third, an ELF object file holds a value identifying its version, deter‐
mined by the ELF version known by the file's creator. Ideally, all
three versions would be the same, but they may differ.
If a program's version is newer than the access library, the program
might use information unknown to the library. Translation routines
might not work properly, leading to undefined behavior. This condition
merits installing a new library.
The library's version might be newer than the program's and the file's.
The library understands old versions, thus avoiding compatibility prob‐
lems in this case.
Finally, a file's version might be newer than either the program or the
library understands. The program might or might not be able to process
the file properly, depending on whether the file has extra information
and whether that information can be safely ignored. Again, the safe
alternative is to install a new library that understands the file's
version.
To accommodate these differences, a program must use elf_version(3ELF)
to pass its version to the library, thus establishing the working ver‐
sion for the process. Using this, the library accepts data from and
presents data to the program in the proper representations. When the
library reads object files, it uses each file's version to interpret
the data. When writing files or converting memory types to the file
equivalents, the library uses the program's working version for the
file data.
System Services
As mentioned above, elf_begin() and related routines provide a higher-
level interface to ELF files, performing input and output on behalf of
the application program. These routines assume a program can hold
entire files in memory, without explicitly using temporary files. When
reading a file, the library routines bring the data into memory and
perform subsequent operations on the memory copy. Programs that wish to
read or write large object files with this model must execute on a
machine with a large process virtual address space. If the underlying
operating system limits the number of open files, a program can use
elf_cntl(3ELF) to retrieve all necessary data from the file, allowing
the program to close the file descriptor and reuse it.
Although the elf_begin() interfaces are convenient and efficient for
many programs, they might be inappropriate for some. In those cases, an
application may invoke the elf32_xlatetom(3ELF) or elf32_xlatetof(3ELF)
data translation routines directly. These routines perform no input or
output, leaving that as the application's responsibility. By assuming a
larger share of the job, an application controls its input and output
model.
Library Names
Names associated with the library take several forms.
elf_name These class-independent names perform some service,
name, for the program.
elf32_name Service names with an embedded class, 32 here, indi‐
cate they work only for the designated class of
files.
Elf_Type Data types can be class-independent as well, distin‐
guished by Type.
Elf32_Type Class-dependent data types have an embedded class
name, 32 here.
ELF_C_CMD Several functions take commands that control their
actions. These values are members of the Elf_Cmd enu‐
meration; they range from zero through ELF_C_NUM−1.
ELF_F_FLAG Several functions take flags that control library
status and/or actions. Flags are bits that may be
combined.
ELF32_FSZ_TYPE These constants give the file sizes in bytes of the
basic ELF types for the 32-bit class of files. See
elf32_fsize() for more information.
ELF_K_KIND The function elf_kind() identifies the KIND of file
associated with an ELF descriptor. These values are
members of the Elf_Kind enumeration; they range from
zero through ELF_K_NUM−1.
ELF_T_TYPE When a service function, such as elf32_xlatetom() or
elf32_xlatetof(), deals with multiple types, names of
this form specify the desired TYPE. Thus, for exam‐
ple, ELF_T_EHDR is directly related to Elf32_Ehdr.
These values are members of the Elf_Type enumeration;
they range from zero through ELF_T_NUM−1.
EXAMPLES
Example 1 An interpretation of elf file.
The basic interpretation of an ELF file consists of:
o opening an ELF object file
o obtaining an ELF descriptor
o analyzing the file using the descriptor.
The following example opens the file, obtains the ELF descriptor, and
prints out the names of each section in the file.
#include <fcntl.h>
#include <stdio.h>
#include <libelf.h>
#include <stdlib.h>
#include <string.h>
static void failure(void);
void
main(int argc, char ** argv)
{
Elf32_Shdr * shdr;
Elf32_Ehdr * ehdr;
Elf * elf;
Elf_Scn * scn;
Elf_Data * data;
int fd;
unsigned int cnt;
/* Open the input file */
if ((fd = open(argv[1], O_RDONLY)) == -1)
exit(1);
/* Obtain the ELF descriptor */
(void) elf_version(EV_CURRENT);
if ((elf = elf_begin(fd, ELF_C_READ, NULL)) == NULL)
failure();
/* Obtain the .shstrtab data buffer */
if (((ehdr = elf32_getehdr(elf)) == NULL) ||
((scn = elf_getscn(elf, ehdr->e_shstrndx)) == NULL) ||
((data = elf_getdata(scn, NULL)) == NULL))
failure();
/* Traverse input filename, printing each section */
for (cnt = 1, scn = NULL; scn = elf_nextscn(elf, scn); cnt++) {
if ((shdr = elf32_getshdr(scn)) == NULL)
failure();
(void) printf("[%d] %s\n", cnt,
(char *)data->d_buf + shdr->sh_name);
}
} /* end main */
static void
failure()
{
(void) fprintf(stderr, "%s\n", elf_errmsg(elf_errno()));
exit(1);
}
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE TYPEAT‐
TRIBUTE VALUE _ Interface StabilityCommitted _ MT-LevelMT-Safe
SEE ALSO
elf32_checksum(3ELF), elf32_fsize(3ELF), elf32_getshdr(3ELF),
elf32_xlatetof(3ELF), elf_begin(3ELF), elf_cntl(3ELF),
elf_errmsg(3ELF), elf_fill(3ELF), elf_getarhdr(3ELF),
elf_getarsym(3ELF), elf_getbase(3ELF), elf_getdata(3ELF), elf_geti‐
dent(3ELF), elf_getscn(3ELF), elf_hash(3ELF), elf_kind(3ELF), elf_mem‐
ory(3ELF), elf_rawfile(3ELF), elf_strptr(3ELF), elf_update(3ELF),
elf_version(3ELF), gelf(3ELF), ar.h(3HEAD), libelf(3LIB),
attributes(7), lfcompile(7)
NOTES
Information in the ELF headers is separated into common parts and pro‐
cessor-specific parts. A program can make a processor's information
available by including the appropriate header: <sys/elf_NAME.h> where
NAME matches the processor name as used in the ELF file header.
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) NameProcessor _
SPARCSPARC _ 386Intel 80386, 80486, Pentium
Other processors will be added to the table as necessary.
To illustrate, a program could use the following code to include the
processor-specific information for the SPARC based system.
#include <libelf.h>
#include <sys/elf_SPARC.h>
Without the <sys/elf_SPARC.h> definition, only the common ELF informa‐
tion would be visible.
A program could use the following code to include the processor-spe‐
cific information for the Intel 80386:
#include <libelf.h>
#include <sys/elf_386.h>
Without the <sys/elf_386.h> definition, only the common ELF information
would be visible.
Although reading the objects is rather straightforward, writing/updat‐
ing them can corrupt the shared offsets among sections. Upon creation,
relationships are established among the sections that must be main‐
tained even if the object's size is changed.
Oracle Solaris 11.4 24 Nov 2020 elf(3ELF)