svcadm(1M)을 검색하려면 섹션에서 1M 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
iconv_open(3c)
Standard C Library Functions iconv_open(3C)
NAME
iconv_open - code conversion allocation function
SYNOPSIS
#include <iconv.h>
iconv_t iconv_open(const char *tocode, const char *fromcode);
DESCRIPTION
The iconv_open() function returns a conversion descriptor that
describes a conversion from the codeset specified by the string pointed
to by the fromcode argument to the codeset specified by the string
pointed to by the tocode argument. For state-dependent encodings, the
conversion descriptor will be in a codeset-dependent initial shift
state, ready for immediate use with the iconv(3C) function.
Settings of fromcode and tocode and their permitted combinations are
implementation-dependent.
The iconv_open() function supports the alias of the encoding name spec‐
ified in tocode and fromcode. The alias table of the encoding name is
described in the file /usr/lib/iconv/alias. See alias(5).
When an empty string ("") or "char" is supplied as the string value for
fromcode, tocode, or both, it is interpreted by the function as the
codeset name of the current locale. Similarly, when "wchar_t" is sup‐
plied, the function interprets it as the wide character encoding of the
current locale in the natural byte order of the current processor or as
defined by the locale.
When one or more of the following indicators are appended to the string
values pointed to by the arguments, code conversion behavior will be
modified as specified at below:
//ILLEGAL_DISCARD
When specified, during subsequent iconv() code conversion, a
sequence of illegal input bytes that does not form a valid charac‐
ter in the codeset specified by the fromcode argument is silently
discarded as if there are no such illegal bytes in the input buffer
and the conversion continues.
//ILLEGAL_REPLACE_HEX
For any illegal input bytes, the iconv() code conversion converts
each of such bytes into a hexadecimal number with a specific lead‐
ing four-letter designator sequence as if such is a valid input
byte and the conversion continues. More specifically, each of such
hexadecimal numbers has a leading four-letter designator sequence
of "IL--" followed by two hexadecimal digits in uppercase, for
instance, "IL--01" for 1, "IL--0A" for 10, "IL--0B" for 11,
"IL--EF" for 239, and so on.
//ILLEGAL_RESTORE_HEX
When specified, the iconv() code conversion simply converts back
the above mentioned hexadecimal numbers for illegal input bytes
into corresponding byte values regardless of the codeset specified
by the tocode argument. For instance, "IL--0A" will be converted
back into a byte with 10 as the value and "IL--FF" into 255.
If the characters following the leading four-letter designator
sequence do not form a valid hexadecimal number, such a sequence
will not be treated as a hexadecimal number for illegal input
bytes.
//NON_IDENTICAL_DISCARD
During subsequent iconv() code conversion, if the conversion
encounters a character in the input buffer in the codeset specified
by the fromcode argument that is legal but for which an identical
character does not exist in the target codeset specified by the
tocode argument, i.e., non-identical characters, the conversion
discards such characters in the output buffer instead of doing an
implementation-defined conversion.
The number of such conversions are, nonetheless, still counted and
returned as the return value of iconv().
//NON_IDENTICAL_REPLACE_HEX
For non-identical characters, the iconv() code conversion converts
each byte of such characters into a hexadecimal number with a spe‐
cific leading four-letter designator sequence. More specifically,
each of such hexadecimal numbers has a leading four-letter designa‐
tor sequence of "NI--" followed by two hexadecimal digits in upper‐
case, for instance, "NI--02" for 2, "NI--0C" for 12, "NI--EF" for
239, and so on.
The number of such non-identical characters are counted and
returned as the return value of iconv().
//NON_IDENTICAL_RESTORE_HEX
When specified, the iconv() code conversion converts back the above
mentioned non-identical hexadecimal numbers into corresponding byte
values regardless of the codeset specified by the tocode argument.
For instance, "NI--0B" will be converted back into a byte with 11
as the value and "NI--FF" into 255.
If the characters following the leading four-letter designator
sequence do not form a valid hexadecimal number, such a sequence
will not be treated as a non-identical hexadecimal number.
//NON_IDENTICAL_TRANSLITERATE
For non-identical characters, if applicable, the iconv() code con‐
version transliterates each of such characters into one or more
characters of the target codeset best resembling the input charac‐
ter.
The number of such non-identical characters are counted and
returned as the return value of iconv().
//IGNORE
A convenience alias to //NON_IDENTICAL_DISCARD//ILLEGAL_DISCARD
indicators.
//REPLACE_HEX
A convenience alias to //NON_IDENTICAL_REPLACE_HEX//ILLE‐
GAL_REPLACE_HEX indicators.
//RESTORE_HEX
A convenience alias to //NON_IDENTICAL_RESTORE_HEX//ILLE‐
GAL_RESTORE_HEX indicators.
//TRANSLIT
A convenience alias to //NON_IDENTICAL_TRANSLITERATE indicator.
When conflicting indicators are specified, one specified right-most
within an argument and at tocode argument if specified at both argu‐
ments will override preceding indicators. As an example, in the follow‐
ing:
cd = iconv_open("UTF-8//IGNORE//REPLACE_HEX", "ISO8859-1//ILLEGAL_REPLACE_HEX");
Among the three indicators specified, the //REPLACE_HEX will be hon‐
ored. For more details on the associated error numbers and function
return values at iconv(), see iconv(3C).
A conversion descriptor remains valid in a process until that process
closes it.
For examples using the iconv_open() function, see the Examples section
below and iconv(3C).
RETURN VALUES
Upon successful completion iconv_open() returns a conversion descriptor
for use on subsequent calls to iconv(). Otherwise, iconv_open() returns
(iconv_t) −1 and sets errno to indicate the error.
ERRORS
The iconv_open function may fail if:
EMFILE {OPEN_MAX} files descriptors are currently open in the call‐
ing process.
ENFILE Too many files are currently open in the system.
ENOMEM Insufficient storage space is available.
EINVAL The conversion specified by fromcode and tocode is not sup‐
ported by the implementation.
EXAMPLES
Example 1 Use iconv_open() to open a simple code conversion.
#include <stdio.h>
#include <errno.h>
#include <iconv.h>
:
iconv_t cd;
:
/* Open an iconv code conversion from ISO 8859-1 to UTF-8. */
cd = iconv_open("UTF-8", "ISO8859-1");
if (cd == (iconv_t)-1) {
(void) fprintf(stderr, "iconv_open(UTF-8, ISO8859-1) failed.\n");
return (1);
}
Example 2 Change conversion behavior by supplying conversion behavior
modification indicators.
#include <stdio.h>
#include <errno.h>
#include <iconv.h>
:
iconv_t cd;
:
/*
* Open an iconv code conversion from UTF-8 to ISO 8859-1 with
* conversion behavior modification indicators that will remove
* illegal byte sequences and replace non-identicals into hexadecimal
* number strings.
*/
cd = iconv_open("ISO8859-1//ILLEGAL_DISCARD//NON_IDENTICAL_REPLACE_HEX",
"UTF-8");
if (cd == (iconv_t)-1) {
(void) fprintf(stderr, "iconv_open(UTF-8, ISO8859-1) failed.\n");
return (1);
}
FILES
/usr/lib/iconv/alias alias table file of the encoding name
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE TYPEAT‐
TRIBUTE VALUE _ Interface StabilityCommitted _ MT-LevelMT-Safe _ Stan‐
dardSee standards(7).
SEE ALSO
geniconvtbl(1), exec(2), cconv(3C), cconv_close(3C), cconv_open(3C),
cconvctl(3C), iconv(3C), iconv_close(3C), malloc(3C), nl_langinfo(3C),
setlocale(3C), alias(5), attributes(7), iconv_extra(7), iconv_ja(7),
iconv_ko(7), iconv_unicode(7), iconv_zh(7), iconv_zh_TW(7), stan‐
dards(7)
NOTES
The iconv_open() function uses malloc(3C) to allocate space for inter‐
nal buffer areas. iconv_open() may fail if there is insufficient stor‐
age space to accommodate these buffers.
Portable applications must assume that conversion descriptors are not
valid after a call to one of the exec functions (see exec(2)).
Individually, depending on the actual implementation of a code conver‐
sion, it is possible that one or more (including all) conversion behav‐
ior modification indicators are not supported by the code conversion
and iconv_open() may fail.
The iconv_open() function finds an available code conversion by first
examining if there is a geniconvtbl binary table for the requested code
conversion. If that yields none, the function will look for an iconv
code conversion shared object for the requested code conversion. If
that also yields nothing, as the last resort, the function will try to
locate necessary cconv binary tables to support the requested code con‐
version. For more details on the geniconvtbl binary table and the cconv
binary table files, refer to geniconvtbl(1) and also cconv man pages
such as cconv_open(3C).
Oracle Solaris 11.4 06 Aug 2016 iconv_open(3C)