svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
wgetch(3x)
curs_getch(3x)curs_getch(3x)
NAME
getch, wgetch, mvgetch, mvwgetch, ungetch, has_key - get (or push back)
characters from curses terminal keyboard
SYNOPSIS
#include <ncursesw/curses.h>
int getch(void);
int wgetch(WINDOW *win);
int mvgetch(int y, int x);
int mvwgetch(WINDOW *win, int y, int x);
int ungetch(int ch);
/* extension */
int has_key(int ch);
DESCRIPTION
Reading characters
The getch, wgetch, mvgetch and mvwgetch, routines read a character from
the window. In no-delay mode, if no input is waiting, the value ERR is
returned. In delay mode, the program waits until the system passes
text through to the program. Depending on the setting of cbreak, this
is after one character (cbreak mode), or after the first newline
(nocbreak mode). In half-delay mode, the program waits until a charac‐
ter is typed or the specified timeout has been reached.
If echo is enabled, and the window is not a pad, then the character
will also be echoed into the designated window according to the follow‐
ing rules:
· If the character is the current erase character, left arrow, or
backspace, the cursor is moved one space to the left and that
screen position is erased as if delch had been called.
· If the character value is any other KEY_ define, the user is alert‐
ed with a beep call.
· If the character is a carriage-return, and if nl is enabled, it is
translated to a line-feed after echoing.
· Otherwise the character is simply output to the screen.
If the window is not a pad, and it has been moved or modified since the
last call to wrefresh, wrefresh will be called before another character
is read.
Keypad mode
If keypad is TRUE, and a function key is pressed, the token for that
function key is returned instead of the raw characters:
· The predefined function keys are listed in <curses.h> as macros
with values outside the range of 8-bit characters. Their names be‐
gin with KEY_.
· Other (user-defined) function keys which may be defined using de‐
fine_key(3X) have no names, but also are expected to have values
outside the range of 8-bit characters.
Thus, a variable intended to hold the return value of a function key
must be of short size or larger.
When a character that could be the beginning of a function key is re‐
ceived (which, on modern terminals, means an escape character), curses
sets a timer. If the remainder of the sequence does not come in within
the designated time, the character is passed through; otherwise, the
function key value is returned. For this reason, many terminals expe‐
rience a delay between the time a user presses the escape key and the
escape is returned to the program.
In ncurses, the timer normally expires after the value in ESCDELAY (see
curs_variables(3X)). If notimeout is TRUE, the timer does not expire;
it is an infinite (or very large) value. Because function keys usually
begin with an escape character, the terminal may appear to hang in no‐
timeout mode after pressing the escape key until another key is
pressed.
Ungetting characters
The ungetch routine places ch back onto the input queue to be returned
by the next call to wgetch. There is just one input queue for all win‐
dows.
Predefined key-codes
The following special keys are defined in <curses.h>.
· Except for the special case KEY_RESIZE, it is necessary to enable
keypad for getch to return these codes.
· Not all of these are necessarily supported on any particular termi‐
nal.
· The naming convention may seem obscure, with some apparent mis‐
spellings (such as “RSUME” for “resume”). The names correspond to
the long terminfo capability names for the keys, and were defined
long ago, in the 1980s.
center tab(/) ; l l . Name/Key name _ KEY_BREAK/Break key KEY_DOWN/The
four arrow keys ... KEY_UP KEY_LEFT KEY_RIGHT KEY_HOME/Home key (up‐
ward+left arrow) KEY_BACKSPACE/Backspace KEY_F0/T{ Function keys; space
for 64 keys is reserved. T} KEY_F(n)/T{ For 0 ≤ n ≤ 63 T}
KEY_DL/Delete line KEY_IL/Insert line KEY_DC/Delete character
KEY_IC/Insert char or enter insert mode KEY_EIC/Exit insert char mode
KEY_CLEAR/Clear screen KEY_EOS/Clear to end of screen KEY_EOL/Clear to
end of line KEY_SF/Scroll 1 line forward KEY_SR/Scroll 1 line backward
(reverse) KEY_NPAGE/Next page KEY_PPAGE/Previous page KEY_STAB/Set tab
KEY_CTAB/Clear tab KEY_CATAB/Clear all tabs KEY_ENTER/Enter or send
KEY_SRESET/Soft (partial) reset KEY_RESET/Reset or hard reset
KEY_PRINT/Print or copy KEY_LL/Home down or bottom (lower left)
KEY_A1/Upper left of keypad KEY_A3/Upper right of keypad KEY_B2/Center
of keypad KEY_C1/Lower left of keypad KEY_C3/Lower right of keypad
KEY_BTAB/Back tab key KEY_BEG/Beg(inning) key KEY_CANCEL/Cancel key
KEY_CLOSE/Close key KEY_COMMAND/Cmd (command) key KEY_COPY/Copy key
KEY_CREATE/Create key KEY_END/End key KEY_EXIT/Exit key KEY_FIND/Find
key KEY_HELP/Help key KEY_MARK/Mark key KEY_MESSAGE/Message key
KEY_MOUSE/Mouse event read KEY_MOVE/Move key KEY_NEXT/Next object key
KEY_OPEN/Open key KEY_OPTIONS/Options key KEY_PREVIOUS/Previous object
key KEY_REDO/Redo key KEY_REFERENCE/Ref(erence) key KEY_REFRESH/Refresh
key KEY_REPLACE/Replace key KEY_RESIZE/Screen resized
KEY_RESTART/Restart key KEY_RESUME/Resume key KEY_SAVE/Save key
KEY_SBEG/Shifted beginning key KEY_SCANCEL/Shifted cancel key KEY_SCOM‐
MAND/Shifted command key KEY_SCOPY/Shifted copy key KEY_SCREATE/Shifted
create key KEY_SDC/Shifted delete char key KEY_SDL/Shifted delete line
key KEY_SELECT/Select key KEY_SEND/Shifted end key KEY_SEOL/Shifted
clear line key KEY_SEXIT/Shifted exit key KEY_SFIND/Shifted find key
KEY_SHELP/Shifted help key KEY_SHOME/Shifted home key KEY_SIC/Shifted
input key KEY_SLEFT/Shifted left arrow key KEY_SMESSAGE/Shifted message
key KEY_SMOVE/Shifted move key KEY_SNEXT/Shifted next key KEY_SOP‐
TIONS/Shifted options key KEY_SPREVIOUS/Shifted prev key
KEY_SPRINT/Shifted print key KEY_SREDO/Shifted redo key KEY_SRE‐
PLACE/Shifted replace key KEY_SRIGHT/Shifted right arrow KEY_SR‐
SUME/Shifted resume key KEY_SSAVE/Shifted save key KEY_SSUSPEND/Shifted
suspend key KEY_SUNDO/Shifted undo key KEY_SUSPEND/Suspend key KEY_UN‐
DO/Undo key
Keypad is arranged like this:
center allbox tab(/) ; c c c . A1/up/A3 left/B2/right C1/down/C3
A few of these predefined values do not correspond to a real key:
· KEY_RESIZE is returned when the SIGWINCH signal has been detected
(see initscr(3X) and resizeterm(3X)). This code is returned
whether or not keypad has been enabled.
· KEY_MOUSE is returned for mouse-events (see curs_mouse(3X)). This
code relies upon whether or not keypad(3X) has been enabled, be‐
cause (e.g., with xterm mouse prototocol) ncurses must read escape
sequences, just like a function key.
Testing key-codes
The has_key routine takes a key-code value from the above list, and re‐
turns TRUE or FALSE according to whether the current terminal type rec‐
ognizes a key with that value.
The library also supports these extensions:
define_key
defines a key-code for a given string (see define_key(3X)).
key_defined
checks if there is a key-code defined for a given string (see
key_defined(3X)).
RETURN VALUE
All routines return the integer ERR upon failure and an integer value
other than ERR (OK in the case of ungetch) upon successful completion.
ungetch
returns ERR if there is no more room in the FIFO.
wgetch
returns ERR if the window pointer is null, or if its timeout
expires without having any data, or if the execution was inter‐
rupted by a signal (errno will be set to EINTR).
Functions with a “mv” prefix first perform a cursor movement using
wmove, and return an error if the position is outside the window, or if
the window pointer is null.
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
box; cbp-1 | cbp-1 l | l . ATTRIBUTE TYPE ATTRIBUTE VALUE = Availabil‐
ity library/ncurses = Stability Uncommitted
NOTES
Use of the escape key by a programmer for a single character function
is discouraged, as it will cause a delay of up to one second while the
keypad code looks for a following function-key sequence.
Some keys may be the same as commonly used control keys, e.g., KEY_EN‐
TER versus control/M, KEY_BACKSPACE versus control/H. Some curses im‐
plementations may differ according to whether they treat these control
keys specially (and ignore the terminfo), or use the terminfo defini‐
tions. Ncurses uses the terminfo definition. If it says that KEY_EN‐
TER is control/M, getch will return KEY_ENTER when you press control/M.
Generally, KEY_ENTER denotes the character(s) sent by the Enter key on
the numeric keypad:
· the terminal description lists the most useful keys,
· the Enter key on the regular keyboard is already handled by the
standard ASCII characters for carriage-return and line-feed,
· depending on whether nl or nonl was called, pressing “Enter” on the
regular keyboard may return either a carriage-return or line-feed,
and finally
· “Enter or send” is the standard description for this key.
When using getch, wgetch, mvgetch, or mvwgetch, nocbreak mode
(nocbreak) and echo mode (echo) should not be used at the same time.
Depending on the state of the tty driver when each character is typed,
the program may produce undesirable results.
Note that getch, mvgetch, and mvwgetch may be macros.
Historically, the set of keypad macros was largely defined by the ex‐
tremely function-key-rich keyboard of the AT&T 7300, aka 3B1, aka Sa‐
fari 4. Modern personal computers usually have only a small subset of
these. IBM PC-style consoles typically support little more than
KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_HOME, KEY_END, KEY_NPAGE,
KEY_PPAGE, and function keys 1 through 12. The Ins key is usually
mapped to KEY_IC.
Source code for open source software components in Oracle Solaris can
be found at https://www.oracle.com/downloads/opensource/solaris-source-
code-downloads.html.
This software was built from source available at https://github.com/or‐
acle/solaris-userland. The original community source was downloaded
from https://invisible-mirror.net/archives/ncurses/ncurses-6.3.tar.gz.
Further information about this software can be found on the open source
community website at https://invisible-island.net/ncurses/.
PORTABILITY
The *get* functions are described in the XSI Curses standard, Issue 4.
They read single-byte characters only. The standard specifies that
they return ERR on failure, but specifies no error conditions.
The echo behavior of these functions on input of KEY_ or backspace
characters was not specified in the SVr4 documentation. This descrip‐
tion is adopted from the XSI Curses standard.
The behavior of getch and friends in the presence of handled signals is
unspecified in the SVr4 and XSI Curses documentation. Under historical
curses implementations, it varied depending on whether the operating
system's implementation of handled signal receipt interrupts a read(2)
call in progress or not, and also (in some implementations) depending
on whether an input timeout or non-blocking mode has been set.
KEY_MOUSE is mentioned in XSI Curses, along with a few related terminfo
capabilities, but no higher-level functions use the feature. The im‐
plementation in ncurses is an extension.
KEY_RESIZE is an extension first implemented for ncurses. NetBSD curs‐
es later added this extension.
Programmers concerned about portability should be prepared for either
of two cases: (a) signal receipt does not interrupt getch; (b) signal
receipt interrupts getch and causes it to return ERR with errno set to
EINTR.
The has_key function is unique to ncurses. We recommend that any code
using it be conditionalized on the NCURSES_VERSION feature macro.
SEE ALSO
curses(3X), curs_inopts(3X), curs_mouse(3X), curs_move(3X), curs_out‐
opts(3X), curs_refresh(3X), curs_variables(3X), resizeterm(3X).
Comparable functions in the wide-character (ncursesw) library are de‐
scribed in curs_get_wch(3X).
curs_getch(3x)