svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
uplcom(4)
UPLCOM(4) BSD Kernel Interfaces Manual UPLCOM(4)
NAME
uplcom — USB support for Prolific PL-2303/2303X/2303HX serial adapters
driver
SYNOPSIS
To compile this driver into the kernel, place the following lines in your
kernel configuration file:
device usb
device ucom
device uplcom
Alternatively, to load the driver as a module at boot time, place the
following line in loader.conf(5):
uplcom_load="YES"
DESCRIPTION
The uplcom driver provides support for various serial adapters based on
the Prolific PL-2303, PL-2303X and PL-2303HX USB-to-RS232 Bridge chips.
The device is accessed through the ucom(4) driver which makes it behave
like a tty(4).
HARDWARE
The uplcom driver supports the following devices and adapters:
· ADLINK ND-6530 USB-Serial Adapter
· Alcatel One Touch 535/735 Phone
· Alcor AU9720 USB-RS232 Serial Adapter
· AlDiga AL-11U Modem
· Alltronix ACM003U00 Modem
· Anchor Serial adapter
· ATEN UC-232A
· BAFO BF-800 and BF-810
· Belkin F5U257
· BenQ S81 Phone
· Corega CG-USBRS232R Serial Adapter
· Cressi Edy (Seiko) Diving Computer
· ELECOM UC-SGT Serial Adapter
· HAL Corporation Crossam2+USB IR commander
· Hama USB RS-232 Serial Adapter
· Hamlet exaggerate XURS232
· HP LD220 Point-Of-Sale (POS) Display
· IOGEAR UC-232A
· I/O DATA USB-RSAQ, USB-RSAQ2, USB-RSAQ3 and USB-RSAQ5
· iTegno WM1080A GSM/GFPRS Modem
· iTegno WM2080A CDMA Modem
· Leadtek 9531 GPS
· Micromax 610U Modem
· Microsoft Palm 700WX
· Mobile Action MA-620 Infrared Adapter
· Motorola Cables
· Nokia CA-42 Cable
· OTI DKU-5 cable
· Panasonic TY-TP50P6-S flat screen
· PLX CA-42 Phone Cable
· PLANEX USB-RS232 URS-03
· Prolific Generic USB-Serial Adapters
· Prolific Pharos USB-Serial Adapter
· RATOC REX-USB60
· Radio Shack USB Serial Cable
· Sagem USB-Serial Adapter
· Samsung I330 Phone Cradle
· Sandberg USB to Serial Link (model number 133-08)
· Sanwa KB-USB2 Multimeter cable
· Siemens/BenQ EF81, SX1, X65 and X75 Mobile Phones
· Sitecom USB-Serial Adapter
· SMART Technologies USB-Serial Adapter
· Sony QN3 Phone Cable
· Sony Ericsson Datapilot
· Sony Ericsson DCU-10 and DCU-11 (Susteen) USB Cables
· SOURCENEXT KeikaiDenwa 8 (with and without charger)
· Speed Dragon USB-Serial Cable
· Syntech CPT-8001C Barcode Scanner
· TDK UHA6400 and UPA9664 USB-PHS Adapters
· TRENDnet USB to Serial Converter (TU-S9)
· Tripp-Lite U209-000-R USB-Serial Adapter
· UIC HCR331 Magnetic Stripe Card Reader
· UIC MSR206 Magnetic Stripe Card Reader
· Willcom W-SIM DD PHS terminal.(WS002IN)
· YC-Cable USB-Serial Adapter
· Zeagle N2iTion3 Diving Computer
SYSCTL VARIABLES
The following variables are available as both sysctl(8) variables and
loader(8) tunables:
hw.usb.uplcom.debug
Debug output level, where 0 is debugging disabled and larger val‐
ues increase debug message verbosity. Default is 0.
FILES
/dev/ttyU* for callin ports
/dev/ttyU*.init
/dev/ttyU*.lock corresponding callin initial-state and lock-state
devices
/dev/cuaU* for callout ports
/dev/cuaU*.init
/dev/cuaU*.lock corresponding callout initial-state and lock-state
devices
SEE ALSO
tty(4), ucom(4), usb(4)
HISTORY
The uplcom driver appeared in NetBSD 1.6. This manual page was adopted
from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002.
BSD April 24, 2018 BSD