svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
umodem(4)
UMODEM(4) BSD Kernel Interfaces Manual UMODEM(4)
NAME
umodem — USB Communication Device Class serial (CDC ACM) driver
SYNOPSIS
To compile this driver into the kernel, place the following lines in your
kernel configuration file:
device usb
device ucom
device umodem
Alternatively, to load the driver as a module at boot time, place the
following line in loader.conf(5):
umodem_load="YES"
DESCRIPTION
The umodem driver provides support for USB modems and serial devices that
implement the Communication Device Class Abstract Control Model (CDC
ACM). It also provides device-side CDC ACM support. Supported modems
are basically standard serial line modems, but they are accessed via USB
instead. They support a regular AT command set. The commands can either
be multiplexed with the data stream or handled through separate pipes.
In the latter case the AT commands have to be given on a device separate
from the data device.
The device is accessed through the ucom(4) driver which makes it behave
like a tty(4).
HARDWARE
Devices supported by the umodem driver include:
· 3Com 5605
· Curitel PC5740 Wireless Modem
· Kyocera AH-K3001V Mobile Phone(WILLCOM)
· Kyocera WX320K Mobile Phone(WILLCOM)
· Metricom Ricochet GS USB wireless modem
· Sierra MC5720 Wireless Modem
· Yamaha Broadband Wireless Router RTW65b
· ELSA MicroLink 56k USB modem
· Sony Ericsson W810i phone
· Sonim XP5300 Force
FILES
/dev/ttyU* for callin ports
/dev/ttyU*.init
/dev/ttyU*.lock corresponding callin initial-state and lock-state
devices
/dev/cuaU* for callout ports
/dev/cuaU*.init
/dev/cuaU*.lock corresponding callout initial-state and lock-state
devices
SEE ALSO
tty(4), ucom(4), usb(4)
HISTORY
The umodem driver appeared in NetBSD 1.5. This manual page was adopted
from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002.
BUGS
Only modems with multiplexed commands and data are supported at the
moment.
BSD April 26, 2017 BSD