개요

• 솔라나라에 설명된 어플리케이션에 대해 맨 페이지를 찾아 출력한다.
• MAN 페이지에 대한 설명은 윈디하나의 솔라나라: MAN 페이지을 참고하자.
• svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.

ulpt(4)

ULPT(4)                  BSD Kernel Interfaces Manual                  ULPT(4)

NAME
     ulpt — USB printer support

SYNOPSIS
     To compile this driver into the kernel, place the following line in your
     kernel configuration file:

           device ulpt

     Alternatively, to load the driver as a module at boot time, place the
     following line in loader.conf(5):

           ulpt_load="YES"

DESCRIPTION
     The ulpt driver provides support for USB printers that follow the printer
     bi- or uni-directional protocol.  The bits in the minor number select
     various features of the driver.

           Minor Bit    Function
           64           Do not initialize (reset) the device on the port.

     Some printers cannot handle the reset on open; in case of problems try
     the unlpt device.

HARDWARE
     The ulpt driver provides support for USB printers and parallel printer
     conversion cables, including the following:

     ·   ATen parallel printer adapter
     ·   Belkin F5U002 parallel printer adapter
     ·   Canon BJ F850, S600
     ·   Canon LBP-1310, 350
     ·   Entrega USB-to-parallel printer adapter
     ·   Hewlett-Packard HP Deskjet 3420 (P/N: C8947A #ABJ)
     ·   Oki Data MICROLINE ML660PS
     ·   Seiko Epson PM-900C, 880C, 820C, 730C

FILES
     /dev/ulpt?   device with reset
     /dev/unlpt?  device without reset

SEE ALSO
     lpt(4), usb(4)

HISTORY
     The ulpt driver appeared in NetBSD 1.4.  This manual page was adopted
     from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002.

BSD                            November 22, 2006                           BSD