개요

• 솔라나라에 설명된 어플리케이션에 대해 맨 페이지를 찾아 출력한다.
• MAN 페이지에 대한 설명은 윈디하나의 솔라나라: MAN 페이지을 참고하자.
• svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.

ucycom(4)

UCYCOM(4)                BSD Kernel Interfaces Manual                UCYCOM(4)

NAME
     ucycom — device driver for Cypress CY7C63743 and CY7C64013 USB to RS232
     bridges

SYNOPSIS
     To compile this driver into the kernel, place the following line in your
     kernel configuration file:

           device usb
           device ucom
           device ucycom

     Alternatively, to load the driver as a module at boot time, place the
     following line in loader.conf(5):

           ucycom_load="YES"

DESCRIPTION
     The ucycom driver provides support for the Cypress CY7C63743 and
     CY7C64013 bridge chips.  These chips were designed to provide a low-cost
     transition path to USB for existing RS232 devices, and have fairly lim‐
     ited capabilities.

     The ucycom driver behaves like a tty(4).

HARDWARE
     The ucycom driver currently supports the following devices which incorpo‐
     rate Cypress USB to RS232 bridge chips:

     ·   DeLorme Earthmate USB GPS receiver

FILES
     /dev/ttyU*       for callin ports
     /dev/ttyU*.init
     /dev/ttyU*.lock  corresponding callin initial-state and lock-state
                      devices

     /dev/cuaU*       for callout ports
     /dev/cuaU*.init
     /dev/cuaU*.lock  corresponding callout initial-state and lock-state
                      devices

SEE ALSO
     tty(4), ucom(4), usb(4)

HISTORY
     The ucycom driver first appeared in FreeBSD 5.3.

AUTHORS
     The ucycom driver and this manual page were written by Dag-Erling
     Smørgrav <des@FreeBSD.org>.

BSD                             April 26, 2017                             BSD