svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
u8_textprep_str(9f)
u8_textprep_str(9F) Kernel Functions u8_textprep_str(9F)
NAME
u8_textprep_str - string-based UTF-8 text preparation function
SYNOPSIS
#include <sys/types.h>
#include <sys/errno.h>
#include <sys/sunddi.h>
size_t u8_textprep_str(char *inarray, size_t *inlen,
char *outarray, size_t *outlen, int flag,
size_t unicode_version, int *errno);
INTERFACE LEVEL
Solaris DDI specific (Solaris DDI)
PARAMETERS
inarray A pointer to a byte array containing a sequence of
UTF-8 character bytes to be prepared.
inlen As input argument, the number of bytes to be pre‐
pared in inarray. As output argument, the number of
bytes in inarray still not consumed.
outarray A pointer to a byte array where prepared UTF-8
character bytes can be saved.
outlen As input argument, the number of available bytes at
outarray where prepared character bytes can be
saved. As output argument, after the conversion,
the number of bytes still available at outarray.
flag The possible preparation options constructed by a
bitwise-inclusive-OR of the following values:
U8_TEXTPREP_IGNORE_NULL
Normally u8_textprep_str() stops the prepara‐
tion if it encounters null byte even if the
current inlen is pointing to a value bigger
than zero.
With this option, null byte does not stop the
preparation and the preparation continues until
inlen specified amount of inarray bytes are all
consumed for preparation or an error happened.
U8_TEXTPREP_IGNORE_INVALID
Normally u8_textprep_str() stops the prepara‐
tion if it encounters illegal or incomplete
characters with corresponding errno values.
When this option is set, u8_textprep_str() does
not stop the preparation and instead treats
such characters as no need to do any prepara‐
tion.
U8_TEXTPREP_TOUPPER
Map lowercase characters to uppercase charac‐
ters if applicable.
U8_TEXTPREP_TOLOWER
Map uppercase characters to lowercase charac‐
ters if applicable.
U8_TEXTPREP_NFD
Apply Unicode Normalization Form D.
U8_TEXTPREP_NFC
Apply Unicode Normalization Form C.
U8_TEXTPREP_NFKD
Apply Unicode Normalization Form KD.
U8_TEXTPREP_NFKC
Apply Unicode Normalization Form KC.
Only one case folding option is allowed. Only one
Unicode Normalization option is allowed.
When a case folding option and a Unicode Normaliza‐
tion option are specified together, UTF-8 text
preparation is done by doing case folding first and
then Unicode Normalization.
If no option is specified, no processing occurs ex‐
cept the simple copying of bytes from input to out‐
put.
unicode_version The version of Unicode data that should be used
during UTF-8 text preparation. The following values
are supported:
U8_UNICODE_320
Use Unicode 3.2.0 data during comparison.
U8_UNICODE_500
Use Unicode 5.0.0 data during comparison.
U8_UNICODE_1400_ORCL
Use Unicode 14.0.0 data during comparison. (See
NOTE below.)
U8_UNICODE_LATEST
Use the latest Unicode version data available,
which is currently Unicode 14.0.0.
errno The error value when preparation is not completed
or fails. The following values are supported:
E2BIG Text preparation stopped due to lack of
space in the output array.
EBADF Specified option values are conflicting
and cannot be supported.
EILSEQ Text preparation stopped due to an input
byte that does not belong to UTF-8.
EINVAL Text preparation stopped due to an incom‐
plete UTF-8 character at the end of the
input array.
ERANGE The specified Unicode version value is
not a supported version.
DESCRIPTION
The u8_textprep_str() function prepares the sequence of UTF-8 charac‐
ters in the array specified by inarray into a sequence of corresponding
UTF-8 characters prepared in the array specified by outarray. The inar‐
ray argument points to a character byte array to the first character in
the input array and inlen indicates the number of bytes to the end of
the array to be converted. The outarray argument points to a character
byte array to the first available byte in the output array and outlen
indicates the number of the available bytes to the end of the array.
Unless flag is U8_TEXTPREP_IGNORE_NULL, u8_textprep_str() normally
stops when it encounters a null byte from the input array regardless of
the current inlen value.
If flag is U8_TEXTPREP_IGNORE_INVALID and a sequence of input bytes
does not form a valid UTF-8 character, preparation stops after the pre‐
vious successfully prepared character. If flag is U8_TEXTPREP_IG‐
NORE_INVALID and the input array ends with an incomplete UTF-8 charac‐
ter, preparation stops after the previous successfully prepared bytes.
If the output array is not large enough to hold the entire prepared
text, preparation stops just prior to the input bytes that would cause
the output array to overflow. The value pointed to by inlen is decre‐
mented to reflect the number of bytes still not prepared in the input
array. The value pointed to by outlen is decremented to reflect the
number of bytes still available in the output array.
NOTE
U8_UNICODE_1400_ORCL uses a slightly modified version of the Unicode
14.0.0 tables. Where Unicode 14.0.0 says that the uppercase equivalent
of U+0131 LATIN SMALL LETTER DOTLESS I is U+0049 LATIN CAPITAL LETTER
I, this implementation does not; it leaves U+0131 without an uppercase
equivalent. This change helps to reduce conflicts between English and
Turkish uses of dotted and dotless I.
RETURN VALUES
The u8_textprep_str() function updates the values pointed to by inlen
and outlen arguments to reflect the extent of the preparation. When
U8_TEXTPREP_IGNORE_INVALID is specified, u8_textprep_str() returns the
number of illegal or incomplete characters found during the text prepa‐
ration. When U8_TEXTPREP_IGNORE_INVALID is not specified and the text
preparation is successful, the function returns 0. If the entire string
in the input array is prepared, the value pointed to by inlen will be
0. If the text preparation is stopped due to any conditions mentioned
above, the value pointed to by inlen will be non-zero and errno is set
to indicate the error. If such and any other error occurs,
u8_textprep_str() returns (size_t)-1 and sets errno to indicate the er‐
ror.
CONTEXT
The u8_textprep_str() function can be called from user or interrupt
context.
EXAMPLES
Example 1 Simple UTF-8 text preparation
#include <sys/types.h>
#include <sys/errno.h>
#include <sys/sunddi.h>
.
.
.
size_t ret;
char ib[MAXPATHLEN];
char ob[MAXPATHLEN];
size_t il, ol;
int err;
.
.
.
/*
* We got a UTF-8 pathname from somewhere.
*
* Calculate the length of input string including the terminating
* NULL byte and prepare other arguments.
*/
(void) strlcpy(ib, pathname, MAXPATHLEN);
il = strlen(ib) + 1;
ol = MAXPATHLEN;
/*
* Do toupper case folding, apply Unicode Normalization Form D,
* ignore NULL byte, and ignore any illegal/incomplete characters.
*/
ret = u8_textprep_str(ib, &il, ob, &ol,
(U8_TEXTPREP_IGNORE_NULL|U8_TEXTPREP_IGNORE_INVALID|
U8_TEXTPREP_TOUPPER|U8_TEXTPREP_NFD), U8_UNICODE_LATEST, &err);
if (ret == (size_t)-1) {
if (err == E2BIG)
return (-1);
if (err == EBADF)
return (-2);
if (err == ERANGE)
return (-3);
return (-4);
}
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE TYPEAT‐
TRIBUTE VALUE _ Interface StabilityCommitted
SEE ALSO
u8_strcmp(3C), u8_textprep_str(3C), u8_validate(3C), attributes(7),
u8_strcmp(9F), u8_validate(9F), uconv_u16tou32(9F)
The Unicode Standard (https://www.unicode.org/standard/standard.html)
Oracle Solaris 11.4 19 May 2022 u8_textprep_str(9F)