개요

• 솔라나라에 설명된 어플리케이션에 대해 맨 페이지를 찾아 출력한다.
• MAN 페이지에 대한 설명은 윈디하나의 솔라나라: MAN 페이지을 참고하자.
• svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.

txp(4)

TXP(4)                   BSD Kernel Interfaces Manual                   TXP(4)

NAME
     txp — 3Com 3XP Typhoon/Sidewinder (3CR990) Ethernet interface

SYNOPSIS
     To compile this driver into the kernel, place the following line in your
     kernel configuration file:

           device txp

     Alternatively, to load the driver as a module at boot time, place the
     following line in loader.conf(5):

           if_txp_load="YES"

DEPRECATION NOTICE
     The txp driver is not present in FreeBSD 13.0 and later.  See
     https://github.com/freebsd/fcp/blob/master/fcp-0101.md for more informa‐
     tion.

DESCRIPTION
     The txp interface provides access to the 10Mb/s and 100Mb/s Ethernet net‐
     works via the 3Com Typhoon/Sidewinder chipset.

     Basic Ethernet functions are provided as well as support for vlan(4) tag
     removal and insertion assistance, receive ip(4), tcp(4), and udp(4)
     checksum offloading, and transmit ip(4) checksum offloading.  There is
     currently no support for transmit tcp(4) or udp(4) checksum offloading,
     tcp(4) segmentation, nor ipsec(4) acceleration.

     When a txp interface is brought up, by default, it will attempt to auto-
     negotiate the link speed and duplex mode.  The speeds, in order of
     attempt, are: 100Mb/s Full Duplex, 100Mb/s Half Duplex, 10 Mb/s Full
     Duplex, and 10 Mb/s Half Duplex.

     The txp supports several media types, which are selected via the
     ifconfig(8) command.  The supported media types are:

     media autoselect
             Attempt to autoselect the media type (default)

     media 100baseTX mediaopt full-duplex
             Use 100baseTX, full duplex

     media 100baseTX [mediaopt half-duplex]
             Use 100baseTX, half duplex

     media 10baseT mediaopt full-duplex
             Use 10baseT, full duplex

     media 10baseT [mediaopt half-duplex]
             Use 10baseT, half duplex

HARDWARE
     The txp driver supports the following cards:

           ·   3Com 3CR990-TX-95
           ·   3Com 3CR990-TX-97
           ·   3Com 3cR990B-TXM
           ·   3Com 3CR990SVR95
           ·   3Com 3CR990SVR97
           ·   3Com 3cR990B-SRV

SEE ALSO
     altq(4), arp(4), inet(4), intro(4), ip(4), miibus(4), tcp(4), udp(4),
     vlan(4), ifconfig(8)

HISTORY
     The txp driver first appeared in OpenBSD 2.9.

BSD                            October 24, 2018                            BSD