svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
ttymon(8)
ttymon(8) System Administration Commands ttymon(8)
NAME
ttymon - port monitor for terminal ports
SYNOPSIS
/usr/sbin/ttymon -g [-d device] [-h] [-t timeout]
[-l ttylabel] [-p prompt] [-m modules] [-T termtype]
DESCRIPTION
ttymon is a STREAMS-based TTY port monitor. Its function is to monitor
ports, to set terminal modes, baud rates, and line disciplines for the
ports, and to connect users or applications to services associated with
the ports. Each instance of ttymon monitors one port, specified at
startup. When an instance of ttymon is started, ttymon first initial‐
izes the line disciplines, if they are specified, and the speed and
terminal settings. For ports with entries in /etc/logindevperm, device
owner, group and permissions are set. (See logindevperm(5).) The values
used for initialization are taken from the appropriate entry in the TTY
settings file. This file is maintained by the sttydefs(8) command. De‐
fault line disciplines on ports are usually set up by the autopush(8)
command of the Autopush Facility.
ttymon then writes the prompt and waits for user input. If the user in‐
dicates that the speed is inappropriate by pressing the BREAK key, tty‐
mon tries the next speed and writes the prompt again. When valid input
is received, ttymon creates a utmpx entry (see utmpx(5)), and execs the
login service for the port. Valid input consists of a string of at
least one non-newline character, terminated by a carriage return.
If autobaud is enabled for a port, ttymon will try to determine the
baud rate on the port automatically. Users must enter a carriage return
before ttymon can recognize the baud rate and print the prompt. Cur‐
rently, the baud rates that can be determined by autobaud are 110,
1200, 2400, 4800, and 9600.
SMF Service Description
The primary smf(7) service which invokes ttymon is svc:/system/console-
login, which may have multiple service instances. Instances are de‐
scribed in greater detail below. The service provides a number of prop‐
erties within the property group ttymon to control the invocation, as
follows:
NAME TYPE TTYMON OPTION
----------------------------------------------------------
device astring [-d device]
nohangup boolean [-h]
label astring [-l label]
modules astring [-m module1,module2]
prompt astring [-p prompt]
timeout count [-t timeout]
terminal_type astring [-T termtype]
If any value is the empty string or an integer set to zero, then the
option is not passed to the ttymon invocation.
svc:/system/console-login:default
The default instance always represents the ttymon that offers login
on the system hardware console.
See EXAMPLES for an example of how to modify settings for the sys‐
tem console.
svc:/system/console-login:{vt2, vt3, vt4, vt5, vt6}
Additional service instances are provided for the system's virtual
consoles. If virtual consoles are not available, these services
will automatically disable themselves. See vtdaemon(8).
svc:/system/console-login:{terma, termb}
svc:/system/console-login:terma and svc:/system/console-login:termb
are provided as a convenience and can assist the user in setting up
login services for additional ports /dev/term/a and /dev/term/b.
These services are disabled by default.
Creating Additional Instances
The user can configure additional service instances for additional de‐
vices. This can be accomplished in any of these ways:
o Manually creating the service instance using svccfg(8).
o Creating the service in a service profile (see smf(7)).
o Creating a service manifest for additional service in‐
stance(s).
See EXAMPLES for an example of manually configuring the service using
svccfg.
SMF Service Errors
In most cases when an instance of the console-login service is miscon‐
figured, it will transition itself to the maintenance state. Use svcs
-l (see svcs(1)) to determine the location of the service's log file
and consult the log for additional information.
In some error cases, the service may respawn indefinitely. Disable the
service using svcadm(8), then consult the service log for additional
messages or information to help resolve the problem.
SECURITY
ttymon uses pam(3PAM) for session management. The PAM configuration
policy, specified in /etc/pam.conf or per-service files in /etc/pam.d/,
specifies the modules to be used for ttymon. Here is a partial pam.conf
file with an entry for ttymon using the UNIX session management module:
ttymon session required /usr/lib/security/pam_unix_session.so.1
The equivalent PAM configuration using /etc/pam.d/ would be the follow‐
ing entry in /etc/pam.d/ttymon:
session required /usr/lib/security/pam_unix_session.so.1
If there are no entries for the ttymon service in /etc/pam.conf and the
/etc/pam.d/ttymon file does not exist, then the entries for the "other"
service in /etc/pam.conf will be used. If there are not any entries in
/etc/pam.conf for the "other" service, then the entries in
/etc/pam.d/other will be used.
OPTIONS
The following options are supported:
-g The -g option is required for historical reasons.
-ddevice device is the full path name of the port to which ttymon
is to attach. If this option is not specified, file de‐
scriptor 0 must be set up by the invoking process to a
TTY port.
-h If the -h flag is not set, ttymon will force a hangup on
the line by setting the speed to zero before setting the
speed to the default or specified speed.
-lttylabel ttylabel is a link to a speed and TTY definition in the
ttydefs file. This definition tells ttymon at what speed
to run initially, what the initial TTY settings are, and
what speed to try next if the user indicates that the
speed is inappropriate by pressing the BREAK key. The de‐
fault speed is 9600 baud.
-mmodules When initializing the port, ttymon will pop all modules
on the port, and then push modules in the order speci‐
fied. modules is a comma-separated list of pushable mod‐
ules. Default modules on the ports are usually set up by
the Autopush Facility.
-pprompt Allows the user to specify a prompt string. The default
prompt is Login:.
-ttimeout Specifies that ttymon should exit if no one types any‐
thing in timeout seconds after the prompt is sent.
-Ttermtype Sets the TERM environment variable to termtype.
-v Enables verbose messaging.
EXAMPLES
Example 1 Setting the Terminal Type for the System Console
The following example sets the value of the terminal type (-T) option
for the system console ttymon invocation:
# svccfg -s svc:/system/console-login:default \
"setprop ttymon/terminal_type = xterm"
# svcadm refresh svc:/system/console-login:default
Example 2 Creating a Service Instance for an Additional Serial Device
In this example, the user wishes to configure an additional instance of
the svc:/system/console-login service in order to offer login services
over a terminal connected by means of a USB serial adapter. Assume that
the USB serial port is present as /dev/term/1, and the user plans to
connect a vt100 terminal to it. In this case, the service instance can
be named term1 (or any other name) and defined as follows:
# svccfg -s svc:/system/console-login "add term1"
# SVC=svc:/system/console-login:term1
# svccfg -s $SVC "addpg ttymon application"
# svccfg -s $SVC "setprop ttymon/device = /dev/term/1"
# svccfg -s $SVC "setprop ttymon/terminal_type = vt100"
# svcadm refresh $SVC
# svcadm enable $SVC
ENVIRONMENT VARIABLES
If any of the LC_* variables (LC_CTYPE, LC_MESSAGES, LC_TIME, LC_COL‐
LATE, LC_NUMERIC, or LC_MONETARY) (see environ(7)) are not set in the
environment, the operational behavior of ttymon for each corresponding
locale category is determined by the value of the LANG environment
variable. If LC_ALL is set, its contents are used to override both LANG
and the other LC_* variables. If none of the above variables is set in
the environment, the "C" locale determines how ttymon behaves.
LC_CTYPE Determines how ttymon handles characters. When LC_CTYPE is
set to a valid value, ttymon can display and handle text
and filenames containing valid characters for that locale.
ttymon can display and handle Extended UNIX Code (EUC)
characters where any individual character can be 1, 2, or 3
bytes wide. ttymon can also handle EUC characters of 1, 2,
or more column widths. In the "C" locale, only characters
from ISO 8859-1 are valid.
FILES
/etc/logindevperm
Contains information that is used by login(1) and ttymon to change
the owner, group, and permissions of devices upon logging into or
out of a console device.
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE TYPEAT‐
TRIBUTE VALUE _ Availabilitysystem/core-os _ Interface StabilityCommit‐
ted
SEE ALSO
svcs(1), pam(3PAM), tty(4D), logindevperm(5), pam.conf(5), ttydefs(5),
utmpx(5), attributes(7), environ(7), pam_authtok_check(7),
pam_authtok_get(7), pam_authtok_store(7), pam_dhkeys(7),
pam_passwd_auth(7), pam_unix_account(7), pam_unix_auth(7),
pam_unix_session(7), smf(7), autopush(8), sttydefs(8), svcadm(8),
svccfg(8), vtdaemon(8)
NOTES
Service Access Facility (SAF and SAC)
ttymon was formerly a component of the Service Access Facility and was
invoked by sac, the Service Access Controller. This facility has been
removed in this release of Solaris, and a conversion to SMF of relevant
portions was performed.
Competition for Ports
If a port is monitored by more than one ttymon, it is possible for the
ttymons to send out prompt messages in such a way that they compete for
input.
It is possible that two svc:/system/console-login service instances
could refer to the same underlying device. For example, if the system's
hardware console is connected (due to settings or autodetection in
firmware) to serial port A, then both the svc:/system/console-login:de‐
fault and svc:/system/console-login:terma services will refer to same
underlying hardware device. Care should be taken when defining or en‐
abling additional service instances to avoid this situation, or the two
ttymons will compete for input.
Oracle Solaris 11.4 23 Jun 2025 ttymon(8)