개요

• 솔라나라에 설명된 어플리케이션에 대해 맨 페이지를 찾아 출력한다.
• MAN 페이지에 대한 설명은 윈디하나의 솔라나라: MAN 페이지을 참고하자.
• svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.

tran_bus_reset(9e)

tran_bus_reset(9E)            Driver Entry Points           tran_bus_reset(9E)



NAME
       tran_bus_reset - reset a SCSI bus

SYNOPSIS
       #include <sys/scsi/scsi.h> int prefix

       tran_bus_reset(dev_info_t *hba_dip, int level);

INTERFACE LEVEL
       Solaris DDI

PARAMETERS
       hba_dip    The dev_info_t pointer associated with the SCSI HBA.


       level      The level of reset required.


DESCRIPTION
       The  tran_bus_reset()  vector in the scsi_hba_tran(9S) structure should
       be initialized during the HBA driver's attach(9E). It is an  HBA  entry
       point  to  be  called  when a user initiates a bus reset through device
       control interfaces.


       tran_bus_reset() must reset the SCSI bus without resetting targets.


       level will be one of the following:

       RESET_BUS    Reset the SCSI bus only, not the targets.



       Implementation is hardware specific. If it is not possible to reset the
       SCSI  bus without changing the state and operating mode of the targets,
       the HBA driver should not initialize this vector or return failure.

RETURN VALUES
       tran_bus_reset() should return:

       1    on success.


       0    on failure.


ATTRIBUTES
       See attributes(7) for a description of the following attributes:


       tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE  TYPEAT‐
       TRIBUTE VALUE _ Interface StabilityCommitted


SEE ALSO
       attributes(7), tran_quiesce(9E), scsi_hba_tran(9S)



Oracle Solaris 11.4               17 Mar 1999               tran_bus_reset(9E)