svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
sysvipc(7)
SVIPC(7) Linux Programmer's Manual SVIPC(7)
NAME
sysvipc - System V interprocess communication mechanisms
SYNOPSIS
#include <sys/msg.h>
#include <sys/sem.h>
#include <sys/shm.h>
DESCRIPTION
This manual page refers to the Linux implementation of the System V in‐
terprocess communication (IPC) mechanisms: message queues, semaphore
sets, and shared memory segments. In the following, the word resource
means an instantiation of one among such mechanisms.
Resource access permissions
For each resource, the system uses a common structure of type struct
ipc_perm to store information needed in determining permissions to per‐
form an IPC operation. The ipc_perm structure includes the following
members:
struct ipc_perm {
uid_t cuid; /* creator user ID */
gid_t cgid; /* creator group ID */
uid_t uid; /* owner user ID */
gid_t gid; /* owner group ID */
unsigned short mode; /* r/w permissions */
};
The mode member of the ipc_perm structure defines, with its lower 9
bits, the access permissions to the resource for a process executing an
IPC system call. The permissions are interpreted as follows:
0400 Read by user.
0200 Write by user.
0040 Read by group.
0020 Write by group.
0004 Read by others.
0002 Write by others.
Bits 0100, 0010, and 0001 (the execute bits) are unused by the system.
Furthermore, "write" effectively means "alter" for a semaphore set.
The same system header file also defines the following symbolic con‐
stants:
IPC_CREAT Create entry if key doesn't exist.
IPC_EXCL Fail if key exists.
IPC_NOWAIT Error if request must wait.
IPC_PRIVATE Private key.
IPC_RMID Remove resource.
IPC_SET Set resource options.
IPC_STAT Get resource options.
Note that IPC_PRIVATE is a key_t type, while all the other symbolic
constants are flag fields and can be OR'ed into an int type variable.
Message queues
A message queue is uniquely identified by a positive integer (its
msqid) and has an associated data structure of type struct msqid_ds,
defined in <sys/msg.h>, containing the following members:
struct msqid_ds {
struct ipc_perm msg_perm;
msgqnum_t msg_qnum; /* no of messages on queue */
msglen_t msg_qbytes; /* bytes max on a queue */
pid_t msg_lspid; /* PID of last msgsnd(2) call */
pid_t msg_lrpid; /* PID of last msgrcv(2) call */
time_t msg_stime; /* last msgsnd(2) time */
time_t msg_rtime; /* last msgrcv(2) time */
time_t msg_ctime; /* last change time */
};
msg_perm ipc_perm structure that specifies the access permissions on
the message queue.
msg_qnum Number of messages currently on the message queue.
msg_qbytes Maximum number of bytes of message text allowed on the mes‐
sage queue.
msg_lspid ID of the process that performed the last msgsnd(2) system
call.
msg_lrpid ID of the process that performed the last msgrcv(2) system
call.
msg_stime Time of the last msgsnd(2) system call.
msg_rtime Time of the last msgrcv(2) system call.
msg_ctime Time of the last system call that changed a member of the
msqid_ds structure.
Semaphore sets
A semaphore set is uniquely identified by a positive integer (its
semid) and has an associated data structure of type struct semid_ds,
defined in <sys/sem.h>, containing the following members:
struct semid_ds {
struct ipc_perm sem_perm;
time_t sem_otime; /* last operation time */
time_t sem_ctime; /* last change time */
unsigned long sem_nsems; /* count of sems in set */
};
sem_perm ipc_perm structure that specifies the access permissions on
the semaphore set.
sem_otime Time of last semop(2) system call.
sem_ctime Time of last semctl(2) system call that changed a member of
the above structure or of one semaphore belonging to the
set.
sem_nsems Number of semaphores in the set. Each semaphore of the set
is referenced by a nonnegative integer ranging from 0 to
sem_nsems-1.
A semaphore is a data structure of type struct sem containing the fol‐
lowing members:
struct sem {
int semval; /* semaphore value */
int sempid; /* PID of process that last modified */
};
semval Semaphore value: a nonnegative integer.
sempid PID of the last process that modified the value of this sem‐
aphore.
Shared memory segments
A shared memory segment is uniquely identified by a positive integer
(its shmid) and has an associated data structure of type struct
shmid_ds, defined in <sys/shm.h>, containing the following members:
struct shmid_ds {
struct ipc_perm shm_perm;
size_t shm_segsz; /* size of segment */
pid_t shm_cpid; /* PID of creator */
pid_t shm_lpid; /* PID, last operation */
shmatt_t shm_nattch; /* no. of current attaches */
time_t shm_atime; /* time of last attach */
time_t shm_dtime; /* time of last detach */
time_t shm_ctime; /* time of last change */
};
shm_perm ipc_perm structure that specifies the access permissions on
the shared memory segment.
shm_segsz Size in bytes of the shared memory segment.
shm_cpid ID of the process that created the shared memory segment.
shm_lpid ID of the last process that executed a shmat(2) or shmdt(2)
system call.
shm_nattch Number of current alive attaches for this shared memory seg‐
ment.
shm_atime Time of the last shmat(2) system call.
shm_dtime Time of the last shmdt(2) system call.
shm_ctime Time of the last shmctl(2) system call that changed
shmid_ds.
IPC namespaces
For a discussion of the interaction of System V IPC objects and IPC
namespaces, see namespaces(7).
SEE ALSO
ipcmk(1), ipcrm(1), ipcs(1), lsipc(1), ipc(2), msgctl(2), msgget(2),
msgrcv(2), msgsnd(2), semctl(2), semget(2), semop(2), shmat(2), shm‐
ctl(2), shmdt(2), shmget(2), ftok(3), namespaces(7)
COLOPHON
This page is part of release 5.02 of the Linux man-pages project. A
description of the project, information about reporting bugs, and the
latest version of this page, can be found at
https://www.kernel.org/doc/man-pages/.
Linux 2016-03-15 SVIPC(7)