svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
symlink(7)
SYMLINK(7) Linux Programmer's Manual SYMLINK(7)
NAME
symlink - symbolic link handling
DESCRIPTION
Symbolic links are files that act as pointers to other files. To un‐
derstand their behavior, you must first understand how hard links work.
A hard link to a file is indistinguishable from the original file be‐
cause it is a reference to the object underlying the original filename.
(To be precise: each of the hard links to a file is a reference to the
same inode number, where an inode number is an index into the inode ta‐
ble, which contains metadata about all files on a filesystem. See
stat(2).) Changes to a file are independent of the name used to refer‐
ence the file. Hard links may not refer to directories (to prevent the
possibility of loops within the filesystem tree, which would confuse
many programs) and may not refer to files on different filesystems (be‐
cause inode numbers are not unique across filesystems).
A symbolic link is a special type of file whose contents are a string
that is the pathname of another file, the file to which the link
refers. (The contents of a symbolic link can be read using read‐
link(2).) In other words, a symbolic link is a pointer to another
name, and not to an underlying object. For this reason, symbolic links
may refer to directories and may cross filesystem boundaries.
There is no requirement that the pathname referred to by a symbolic
link should exist. A symbolic link that refers to a pathname that does
not exist is said to be a dangling link.
Because a symbolic link and its referenced object coexist in the
filesystem name space, confusion can arise in distinguishing between
the link itself and the referenced object. On historical systems, com‐
mands and system calls adopted their own link-following conventions in
a somewhat ad-hoc fashion. Rules for a more uniform approach, as they
are implemented on Linux and other systems, are outlined here. It is
important that site-local applications also conform to these rules, so
that the user interface can be as consistent as possible.
Symbolic link ownership, permissions, and timestamps
The owner and group of an existing symbolic link can be changed using
lchown(2). The only time that the ownership of a symbolic link matters
is when the link is being removed or renamed in a directory that has
the sticky bit set (see stat(2)).
The last access and last modification timestamps of a symbolic link can
be changed using utimensat(2) or lutimes(3).
On Linux, the permissions of a symbolic link are not used in any opera‐
tions; the permissions are always 0777 (read, write, and execute for
all user categories), and can't be changed. (Note that there are some
"magic" symbolic links in the /proc directory tree—for example, the
/proc/[pid]/fd/* files—that have different permissions.)
Obtaining a file descriptor that refers to a symbolic link
Using the combination of the O_PATH and O_NOFOLLOW flags to open(2)
yields a file descriptor that can be passed as the dirfd argument in
system calls such as fstatat(2), fchownat(2), fchmodat(2), linkat(2),
and readlinkat(2), in order to operate on the symbolic link itself
(rather than the file to which it refers).
By default (i.e., if the AT_SYMLINK_FOLLOW flag is not specified), if
name_to_handle_at(2) is applied to a symbolic link, it yields a handle
for the symbolic link (rather than the file to which it refers). One
can then obtain a file descriptor for the symbolic link (rather than
the file to which it refers) by specifying the O_PATH flag in a subse‐
quent call to open_by_handle_at(2). Again, that file descriptor can be
used in the aforementioned system calls to operate on the symbolic link
itself.
Handling of symbolic links by system calls and commands
Symbolic links are handled either by operating on the link itself, or
by operating on the object referred to by the link. In the latter
case, an application or system call is said to follow the link. Sym‐
bolic links may refer to other symbolic links, in which case the links
are dereferenced until an object that is not a symbolic link is found,
a symbolic link that refers to a file which does not exist is found, or
a loop is detected. (Loop detection is done by placing an upper limit
on the number of links that may be followed, and an error results if
this limit is exceeded.)
There are three separate areas that need to be discussed. They are as
follows:
1. Symbolic links used as filename arguments for system calls.
2. Symbolic links specified as command-line arguments to utilities that
are not traversing a file tree.
3. Symbolic links encountered by utilities that are traversing a file
tree (either specified on the command line or encountered as part of
the file hierarchy walk).
System calls
The first area is symbolic links used as filename arguments for system
calls.
Except as noted below, all system calls follow symbolic links. For ex‐
ample, if there were a symbolic link slink which pointed to a file
named afile, the system call open("slink" ...) would return a file de‐
scriptor referring to the file afile.
Various system calls do not follow links, and operate on the symbolic
link itself. They are: lchown(2), lgetxattr(2), llistxattr(2), lre‐
movexattr(2), lsetxattr(2), lstat(2), readlink(2), rename(2), rmdir(2),
and unlink(2).
Certain other system calls optionally follow symbolic links. They are:
faccessat(2), fchownat(2), fstatat(2), linkat(2), name_to_handle_at(2),
open(2), openat(2), open_by_handle_at(2), and utimensat(2); see their
manual pages for details. Because remove(3) is an alias for unlink(2),
that library function also does not follow symbolic links. When
rmdir(2) is applied to a symbolic link, it fails with the error ENOT‐
DIR.
link(2) warrants special discussion. POSIX.1-2001 specifies that
link(2) should dereference oldpath if it is a symbolic link. However,
Linux does not do this. (By default, Solaris is the same, but the
POSIX.1-2001 specified behavior can be obtained with suitable compiler
options.) POSIX.1-2008 changed the specification to allow either be‐
havior in an implementation.
Commands not traversing a file tree
The second area is symbolic links, specified as command-line filename
arguments, to commands which are not traversing a file tree.
Except as noted below, commands follow symbolic links named as command-
line arguments. For example, if there were a symbolic link slink which
pointed to a file named afile, the command cat slink would display the
contents of the file afile.
It is important to realize that this rule includes commands which may
optionally traverse file trees; for example, the command chown file is
included in this rule, while the command chown -R file, which performs
a tree traversal, is not. (The latter is described in the third area,
below.)
If it is explicitly intended that the command operate on the symbolic
link instead of following the symbolic link—for example, it is desired
that chown slink change the ownership of the file that slink is,
whether it is a symbolic link or not—the -h option should be used. In
the above example, chown root slink would change the ownership of the
file referred to by slink, while chown -h root slink would change the
ownership of slink itself.
There are some exceptions to this rule:
* The mv(1) and rm(1) commands do not follow symbolic links named as
arguments, but respectively attempt to rename and delete them.
(Note, if the symbolic link references a file via a relative path,
moving it to another directory may very well cause it to stop work‐
ing, since the path may no longer be correct.)
* The ls(1) command is also an exception to this rule. For compatibil‐
ity with historic systems (when ls(1) is not doing a tree walk—that
is, -R option is not specified), the ls(1) command follows symbolic
links named as arguments if the -H or -L option is specified, or if
the -F, -d, or -l options are not specified. (The ls(1) command is
the only command where the -H and -L options affect its behavior even
though it is not doing a walk of a file tree.)
* The file(1) command is also an exception to this rule. The file(1)
command does not follow symbolic links named as argument by default.
The file(1) command does follow symbolic links named as argument if
the -L option is specified.
Commands traversing a file tree
The following commands either optionally or always traverse file trees:
chgrp(1), chmod(1), chown(1), cp(1), du(1), find(1), ls(1), pax(1),
rm(1), and tar(1).
It is important to realize that the following rules apply equally to
symbolic links encountered during the file tree traversal and symbolic
links listed as command-line arguments.
The first rule applies to symbolic links that reference files other
than directories. Operations that apply to symbolic links are per‐
formed on the links themselves, but otherwise the links are ignored.
The command rm -r slink directory will remove slink, as well as any
symbolic links encountered in the tree traversal of directory, because
symbolic links may be removed. In no case will rm(1) affect the file
referred to by slink.
The second rule applies to symbolic links that refer to directories.
Symbolic links that refer to directories are never followed by default.
This is often referred to as a "physical" walk, as opposed to a "logi‐
cal" walk (where symbolic links that refer to directories are fol‐
lowed).
Certain conventions are (should be) followed as consistently as possi‐
ble by commands that perform file tree walks:
* A command can be made to follow any symbolic links named on the com‐
mand line, regardless of the type of file they reference, by specify‐
ing the -H (for "half-logical") flag. This flag is intended to make
the command-line name space look like the logical name space. (Note,
for commands that do not always do file tree traversals, the -H flag
will be ignored if the -R flag is not also specified.)
For example, the command chown -HR user slink will traverse the file
hierarchy rooted in the file pointed to by slink. Note, the -H is
not the same as the previously discussed -h flag. The -H flag causes
symbolic links specified on the command line to be dereferenced for
the purposes of both the action to be performed and the tree walk,
and it is as if the user had specified the name of the file to which
the symbolic link pointed.
* A command can be made to follow any symbolic links named on the com‐
mand line, as well as any symbolic links encountered during the tra‐
versal, regardless of the type of file they reference, by specifying
the -L (for "logical") flag. This flag is intended to make the en‐
tire name space look like the logical name space. (Note, for com‐
mands that do not always do file tree traversals, the -L flag will be
ignored if the -R flag is not also specified.)
For example, the command chown -LR user slink will change the owner
of the file referred to by slink. If slink refers to a directory,
chown will traverse the file hierarchy rooted in the directory that
it references. In addition, if any symbolic links are encountered in
any file tree that chown traverses, they will be treated in the same
fashion as slink.
* A command can be made to provide the default behavior by specifying
the -P (for "physical") flag. This flag is intended to make the en‐
tire name space look like the physical name space.
For commands that do not by default do file tree traversals, the -H,
-L, and -P flags are ignored if the -R flag is not also specified. In
addition, you may specify the -H, -L, and -P options more than once;
the last one specified determines the command's behavior. This is in‐
tended to permit you to alias commands to behave one way or the other,
and then override that behavior on the command line.
The ls(1) and rm(1) commands have exceptions to these rules:
* The rm(1) command operates on the symbolic link, and not the file it
references, and therefore never follows a symbolic link. The rm(1)
command does not support the -H, -L, or -P options.
* To maintain compatibility with historic systems, the ls(1) command
acts a little differently. If you do not specify the -F, -d or -l
options, ls(1) will follow symbolic links specified on the command
line. If the -L flag is specified, ls(1) follows all symbolic links,
regardless of their type, whether specified on the command line or
encountered in the tree walk.
SEE ALSO
chgrp(1), chmod(1), find(1), ln(1), ls(1), mv(1), namei(1), rm(1),
lchown(2), link(2), lstat(2), readlink(2), rename(2), symlink(2), un‐
link(2), utimensat(2), lutimes(3), path_resolution(7)
COLOPHON
This page is part of release 5.02 of the Linux man-pages project. A
description of the project, information about reporting bugs, and the
latest version of this page, can be found at
https://www.kernel.org/doc/man-pages/.
Linux 2016-10-08 SYMLINK(7)