svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
sstore(1)
sstore(1) User Commands sstore(1)
NAME
sstore - Statistics Store management utility
SYNOPSIS
/usr/bin/sstore [-?]
/usr/bin/sstore help [subcommand]
/usr/bin/sstore capture [-aH]
[statid ... | -f ssid_file |
[interval [count]]
/usr/bin/sstore export [-F format] [-aH]
[[[-t start-time] [-e end-time] [-i step]] |
[[-t start-time] [-i step] [-p relative-pts]]]
[statid ... | -f ssid_file]
/usr/bin/sstore list [-F format] [-aH]
[[[-t start-time] [-e end-time]] |
[[-t start-time] [-p relative-pts]]]
[statid ... | -f ssid_file]
/usr/bin/sstore info [-F format] [-a]
[[[-t start-time] [-e end-time]] |
[[-t start-time] [-p relative-pts]]]
[statid ... | -f ssid_file]
DESCRIPTION
The sstore command provides the ability to capture, export, and display
statistics and event information contained within a statistics reposi‐
tory.
OPTIONS
The following option is supported:
-? Displays a usage message.
COMMON SUB-COMMAND OPTIONS
The following options are supported for all subcommands unless speci‐
fied otherwise:
-F format
Specifies an alternative output format. The value of format can be
tsv (Tab Separated Values), csv (Comma Separated Values), or json
(JavaScript Object Notation, formatted for readability). For csv
formatted output, the query must include a time range (see the -t
option) and a granularity or step in seconds.
The CSV output format is described in the sstore.csv(5) man page.
The JSON output format is described in the sstore.json(5) man page.
-a
Makes wildcards match all entries (unstable and unbrowsable identi‐
fiers are hidden by default).The subcommand info, if specified
without wildcard will list a detailed information of each identi‐
fier in the sstore. However, the subcommands export and capture
strictly expect a wildcard or an SSID with this option. Refer to
examples for more details on the various subcommands.
-H
Omits the headers from the output.
-f ssid_file
Specifies a file that contains a list of identifiers (one per line)
or in the same JSON (JavaScript Object Notation) format provided by
the sstore export command. This option cannot be combined with a
direct identifier specification.
-t start-time
Starts a timestamp formatted with %Y-%m-%dT%H:%M:%S. For more
information, see the strftime(3C) man page. The keyword now can be
used to specify the current time. This option defaults to epoch
when not specified, unless otherwise noted.
There are two ways of specifying a time range:
Form 1: -t start-time -e end-time -i step
Form 1 is always assumed if -t is specified without -p. In this
form, the data returned is bounded by the start and end times,
with a minimum granularity of step.
Form 2: -t start-time -p relative-pts
Form 2 returns at maximum relative-pts data points with no
guaranteed granularity. You can specify a positive or negative
value, which signifies whether the points returned come after
or before start-time respectively.
Form 3: -t start-time -i step -p relative-pts
Form 3 returns at maximum relative-pts data points with granu‐
larity of step seconds. You can specify a positive or negative
value for relative-pts, which signifies whether the points
returned come after or before start-time respectively.
-e end-time
Ends the timestamp (for information on formatting, see -t). This
option defaults to now if not present when -t is specified without
-p.
-i step
Specifies the interval between timestamps. The step shall be speci‐
fied as [n] [ns] [nm] [nh] [nd] [nw], where n is the time duration
and s, m, h, d and w corresponds to seconds, minutes, hours, days
and weeks respectively. For example, 10 or 10s will be 10 seconds,
5h will be 5 hours, 2d will be 2 days and 3w will be interpreted as
3 weeks. For all non-zero specifications of step, the corresponding
time interval is taken and the data is interpolated such that the
timestamps between points are exactly step apart.
If step is zero or not specified, data is returned with timestamps
unmodified from the sstored initial sampling. By default, sstored
attempts to sample statistics once per second, but can occasionally
fail to do so, depending on the load of the system. See the
sstored(8) man page.
-p relative-pts
Specifies the maximum number of data points to return. This value
must be non-zero. An optional start-time can be specified. If
start-time is not specified, then the start time defaults to now.
OPERANDS
statid
A statistics store identifier (SSID). To specify multiple identi‐
fiers, separate identifiers with spaces or use wildcards or splices
as described in Using Oracle Solaris 11.4 Analytics.
SUB-COMMANDS
The following subcommands are supported:
sstore help subcommand
This command displays usage for the specified sstore subcommand or
for all sstore subcommands.
To display usage for a specific subcommand, use the sstore help
command with that specific subcommand as an operand.
If you use the sstore help command with no operand, usage for all
sstore subcommands is displayed.
sstore capture [-aH] [statid ... | -f ssid_file] [interval [count]]
This subcommand captures and prints statistics and event informa‐
tion for the given identifiers until the process terminates.
If you specify interval, the results are printed every interval
seconds until the process is terminated by entering Ctrl-C.
If you specify count, the process terminates after printing the
results count times.
Note -
To display available resources, statistics, events, and their
identifiers, use the sstore list command.
sstore export [-F format] [-aH] [[[-t start-time] [-e end-time] [-i
step]] | [[-t start-time] [-i step] [-p relative-pts]]] [statid ... |
-f ssid_file]
This subcommand prints the historical statistic and event informa‐
tion for the given identifiers over the given time range.
You must specify at least one identifier. Time ranges are optional.
If you do not specify a time range, then all the data for the given
identifiers is printed.
sstore list [-F format] [-aH] [[[-t start-time] [-e end-time] | [[-t
start-time] [-p relative-pts]]] [statid ... | -f ssid_file]
This subcommand prints the list of matching identifiers.
If you do not specify -t, then now is assumed as the start time
value, and the sstore list command prints the list of identifiers
that are currently available.
If you specify -t, then the ranges of activity, which indicates the
time at which the identifier was available for capture, are also
printed. Thus, the -t option can also be used to view when in the
past resources were available on the system.
sstore info [-F format] [-a] [[[-t start-time] [-e end-time] | [[-t
start-time] [-p relative-pts]]] [statid ... | -f ssid_file]
This subcommand displays information about a given identifier.
The time range specification behavior is identical to that for the
sstore list command.
EXAMPLES
See the ssid-op(7) man page for examples of //:op and //:fmt.
Example 1 Record a Statistic Every Five Seconds Twice
This example records CPU integer pipeline usage (in a kernel zone with
two strands), displaying the current stat values every five seconds for
two iterations.
$ sstore capture '//:class.cpu//:res.id/*//:stat.integer-pipe-usage' 5 2
TIME VALUE IDENTIFIER
2014-10-08T14:42:06 104501725 //:class.cpu//:res.id/0//:stat.integer-pipe-usage
2014-10-08T14:42:06 110927532 //:class.cpu//:res.id/1//:stat.integer-pipe-usage
2014-10-08T14:42:11 123515733 //:class.cpu//:res.id/0//:stat.integer-pipe-usage
Example 2 Export Statistic Values after Previously Capturing
This example exports historical statistics for the datalink net0 after
enabling capture eight seconds previously.
$ sstore export '//:class.link/phys//:res.name/net0//:stat.//:s.[out-bytes,in-bytes]'
TIME VALUE IDENTIFIER
2014-10-08T15:13:46 1073914647 //:class.link/phys//:res.name/net0//:stat.out-bytes
2014-10-08T15:13:47 1073915035 //:class.link/phys//:res.name/net0//:stat.out-bytes
2014-10-08T15:13:48 1073915713 //:class.link/phys//:res.name/net0//:stat.out-bytes
2014-10-08T15:13:49 1073916959 //:class.link/phys//:res.name/net0//:stat.out-bytes
2014-10-08T15:13:50 1073917089 //:class.link/phys//:res.name/net0//:stat.out-bytes
2014-10-08T15:13:51 1073920729 //:class.link/phys//:res.name/net0//:stat.out-bytes
2014-10-08T15:13:52 1073922289 //:class.link/phys//:res.name/net0//:stat.out-bytes
2014-10-08T15:13:53 1073923069 //:class.link/phys//:res.name/net0//:stat.out-bytes
2014-10-08T15:13:47 4226366841 //:class.link/phys//:res.name/net0//:stat.in-bytes
2014-10-08T15:13:48 4226367123 //:class.link/phys//:res.name/net0//:stat.in-bytes
2014-10-08T15:13:49 4226367773 //:class.link/phys//:res.name/net0//:stat.in-bytes
2014-10-08T15:13:50 4226368179 //:class.link/phys//:res.name/net0//:stat.in-bytes
2014-10-08T15:13:51 4226372059 //:class.link/phys//:res.name/net0//:stat.in-bytes
2014-10-08T15:13:52 4226373961 //:class.link/phys//:res.name/net0//:stat.in-bytes
2014-10-08T15:13:53 4226375257 //:class.link/phys//:res.name/net0//:stat.in-bytes
Example 3 Export Statistic Values of previously captured data with 10
second step
$ sstore export -i 10s -t now -e 25 '//:class.link/phys//:res.name/net0//:stat.//:s.[out-bytes,in-bytes]'
TIME VALUE IDENTIFIER
2020-06-16T11:19:43 150973526.0 //:class.link/phys//:res.name/net0//:stat.out-bytes
2020-06-16T11:19:53 150977726.0 //:class.link/phys//:res.name/net0//:stat.out-bytes
2020-06-16T11:20:03 150981926.0 //:class.link/phys//:res.name/net0//:stat.out-bytes
2020-06-16T11:19:43 46361608.0 //:class.link/phys//:res.name/net0//:stat.in-bytes
2020-06-16T11:19:53 46362448.0 //:class.link/phys//:res.name/net0//:stat.in-bytes
2020-06-16T11:20:03 46363662.0 //:class.link/phys//:res.name/net0//:stat.in-bytes
Example 4 Export Statistic Values of previously captured data with 1
minute step
$ sstore export -i 1m -t now -e 180 '//:class.link/phys//:res.name/net0//:stat.//:s.[out-bytes,in-bytes]'
TIME VALUE IDENTIFIER
2020-06-16T11:21:23 150987526.0 //:class.link/phys//:res.name/net0//:stat.out-bytes
2020-06-16T11:22:23 150998000.0 //:class.link/phys//:res.name/net0//:stat.out-bytes
2020-06-16T11:23:23 151023386.0 //:class.link/phys//:res.name/net0//:stat.out-bytes
2020-06-16T11:24:23 151051466.0 //:class.link/phys//:res.name/net0//:stat.out-bytes
2020-06-16T11:21:23 46369071.0 //:class.link/phys//:res.name/net0//:stat.in-bytes
2020-06-16T11:22:23 46373059.0 //:class.link/phys//:res.name/net0//:stat.in-bytes
2020-06-16T11:23:23 46379147.0 //:class.link/phys//:res.name/net0//:stat.in-bytes
2020-06-16T11:24:23 46391989.0 //:class.link/phys//:res.name/net0//:stat.in-bytes
Example 5 Export Statistic Values of previously captured data of previ‐
ous 3 data points relative to now with 5 seconds step
$ sstore export -i 5 -p -3 -t now '//:class.kstat//:res.system/cpu/0/sys//:stat.cpu_nsec_idle'
TIME VALUE IDENTIFIER
2021-05-10T09:44:01 932648728114295 //:class.kstat//:res.system/cpu/0/sys//:stat.cpu_nsec_idle
2021-05-10T09:44:06 932653671291909 //:class.kstat//:res.system/cpu/0/sys//:stat.cpu_nsec_idle
2021-05-10T09:44:11 932658595839475 //:class.kstat//:res.system/cpu/0/sys//:stat.cpu_nsec_idle
Example 6 Export Statistic Values of previously captured data of next 3
data points relative to given start-time with 5 seconds step
$ sstore export -i 5 -p 3 -t 2021-05-10T09:35:10 '//:class.kstat//:res.system/cpu/0/sys//:stat.cpu_nsec_idle'
TIME VALUE IDENTIFIER
2021-05-10T09:35:10 932126235430593 //:class.kstat//:res.system/cpu/0/sys//:stat.cpu_nsec_idle
2021-05-10T09:35:15 932131178062798 //:class.kstat//:res.system/cpu/0/sys//:stat.cpu_nsec_idle
2021-05-10T09:35:20 932136105248117 //:class.kstat//:res.system/cpu/0/sys//:stat.cpu_nsec_idle
Example 7 Export Statistic Values of previously captured data of previ‐
ous 3 data points relative to given start-time with 5 seconds step
$ sstore export -i 5 -p -3 -t 2021-05-10T09:35:10 '//:class.kstat//:res.system/cpu/0/sys//:stat.cpu_nsec_idle'
TIME VALUE IDENTIFIER
2021-05-10T09:34:59 932115382756757 //:class.kstat//:res.system/cpu/0/sys//:stat.cpu_nsec_idle
2021-05-10T09:35:04 932120312981016 //:class.kstat//:res.system/cpu/0/sys//:stat.cpu_nsec_idle
2021-05-10T09:35:09 932125248546632 //:class.kstat//:res.system/cpu/0/sys//:stat.cpu_nsec_idle
Example 8 Export Statistic Values by matching wildcards
This example exports historical statistics for the Filesystems display‐
ing all the stats which wildcard matches.
$ sstore export -a '//:class.fs//:*'
TIME VALUE IDENTIFIER
...
2020-06-03T10:04:27 7097594.0 //:class.fs//:stat.access-ops
2020-06-03T10:04:28 7097846.0 //:class.fs//:stat.access-ops
...
2020-06-03T10:04:41 471072.0 //:class.fs//:stat.addmap-ops
2020-06-03T10:04:42 471072.0 //:class.fs//:stat.addmap-ops
...
2020-06-03T10:04:41 0.0 //:class.fs//:stat.async-cancel-ops
2020-06-03T10:04:42 0.0 //:class.fs//:stat.async-cancel-ops
...
Example 9 List Available CPU Statistics and Events
$ sstore list '//:class.cpu//:res.id/0//://:s.[stat,event].*'
IDENTIFIER
//:class.cpu//:res.id/0//:stat.usage
//:class.cpu//:res.id/0//:stat.integer-pipe-usage
//:class.cpu//:res.id/0//:stat.interrupt-count
//:class.cpu//:res.id/0//:stat.interrupt-time
//:class.cpu//:res.id/0//:stat.xcalls
//:class.cpu//:res.id/0//:event.adm-action
//:class.cpu//:res.id/0//:event.alert
//:class.cpu//:res.id/0//:event.fault
Example 10 Display Information about a Network Statistic
$ sstore info //:class.link/phys//:res.name/net0//:stat.ifspeed
Identifier: //:class.link/phys//:res.name/net0//:stat.ifspeed
description: maximum received or transmitted bytes/s
copyright: Copyright (c) 2014, 2020, Oracle and/or its affiliates.
stability: stable
max-rate: //:stat.ifspeed
multiplier: 8
units: bytes
$schema: //:stat
type: rate
id: //:class.link/phys//:stat.ifspeed
Example 11 Display Information about a Network and CPU Resource
$ sstore info //:class.link/phys//:res.name/net0 //:class.cpu//:res.id/0
Identifier: //:class.link/phys//:res.name/net0
stability: stable
description: data link instance
Identifier: //:class.cpu//:res.id/0
stability: stable
description: cpu instance
Example 12 Display Information on all the indentifiers that are cur‐
rently available in sstore.
$ sstore info -a
...
Identifier: //:class.zpool
$schema: //:class
copyright: Copyright (c) 2015, 2020, Oracle and/or its affiliates.
description: ZFS pool statistics
id: zpool
instance-metadata: {'description': 'ZFS pool', 'stability': 'stable'}
namespaces: {'name-type': 'string', 'resource-name': 'name'}
stability: stable
stat-names: //:stat.size
stat-names: //:stat.capacity
stat-names: //:stat.health
stat-names: //:stat.guid
stat-names: //:stat.version
stat-names: //:stat.available
stat-names: //:stat.allocated
...
Identifier: //:class.app/solaris/audit/class
$schema: //:class
copyright: Copyright (c) 2016, 2020, Oracle and/or its affiliates.
description: Solaris Audit class statistics
id: app/solaris/audit/class
namespaces: {'name-type': 'string', 'resource-name': 'name'}
sau_read_sensitive_auth: solaris.sstore.audit.read
stability: stable
stat-names: //:stat.pass
stat-names: //:stat.fail
...
EXIT STATUS
The following exit values are returned:
0 Command succeeded.
1 An error occurred.
2 Invalid command line options were specified.
3 Multiple operations were requested, but only some of them suc‐
ceeded.
99 An unanticipated error occurred.
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE TYPEAT‐
TRIBUTE VALUE _ Availabilitysystem/sstore _ Interface StabilityUncom‐
mitted
SEE ALSO
libsstore(3LIB), ssid-metadata(7), ssid-op(7), sstoreadm(1), sstored(8)
Using Oracle Solaris 11.4 Analytics
Oracle Solaris 11.4 27 May 2021 sstore(1)