svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
sharectl(8)
sharectl(8) System Administration Commands sharectl(8)
NAME
sharectl - configure and manage file sharing service
SYNOPSIS
sharectl [-h]
sharectl status [-h] [protocol]
sharectl get [-h] [-p property]... protocol
sharectl set [-h] [-p property=value]... protocol
DESCRIPTION
The sharectl command operates on file-sharing protocols, such as NFS
and SMB. The command sets the client and server operational properties,
takes and restores configuration snapshots, and gets status of the pro‐
tocol service.
The get and set subcommands (see below) require root privileges. An au‐
thorized user can use sharectl to set global values for NFS and SMB
properties in the Solaris server management facility. See autofs(5),
nfs(5) and smb(5).
OPTIONS
The following options are supported:
-h
Displays usage message.
-p property[=value]
Specifies a property. See "Subcommands," below.
Subcommands
sharectl supports the subcommands described below. The form of a
sharectl command is:
# sharectl subcommand [option]
get [-p property] protocol
Get the property values for the specified protocol. If no -p option
is provided, get all the properties for the specified protocol. If
only client or server side support for the specified protocol is
installed, then only client or server specific properties are dis‐
played.
set [-p property=value]... protocol
Set properties for the specified file sharing protocol. If only
client or server side support for the specified protocol is in‐
stalled, then only client or server specific properties can be set.
status [protocol]
Display status of the specified protocol, or, if no protocol is
specified, of all file-sharing protocols.
showmount_info={full | none}
If the value of this property is none, the following rules apply:
o A client can see only the shares that it is allowed to
access.
o A client cannot see access lists for the shares defined
at server.
o A client cannot see remote mounts from the server done
by other clients.
If the value is full, these rules do not apply. The default value
is full.
For example, to place the restrictions specified above for users of
showmount(8), enter:
# sharectl set -p showmount_info=none nfs
% sharectl get -p showmount_info nfs
showmount_info=none
EXAMPLES
Example 1 Getting Properties
The following command gets the properties for the NFS protocol.
% sharectl get nfs
servers=1024
lockd_listen_backlog=32
lockd_servers=1024
lockd_retransmit_timeout=5
grace_period=90
server_versmin=2
server_versmax=4
client_versmin=2
client_versmax=4
server_delegation=on
server_numeric_stringid=true
nfsmapid_domain=oracle.com
max_connections=-1
protocol=ALL
listen_backlog=32
device=
resvport=false
The following command gets the value of the grace_period property for
the NFS protocol.
% sharectl get -p grace_period nfs
grace_period=90
Example 2 Setting a Property
Note in the preceding example that the minimum version of the server
NFS protocol (server_versmin) is set to 2. The following command sets
the minimum version number to version 3.
% sharectl set -p server_versmin=3 nfs
Example 3 Obtaining Status
The following command obtains the status of all file-sharing protocols
on a system.
% sharectl status
nfs enabled
Example 4 Setting Property for SMB Server
The following command sets the value of the server_signing_required
property for the SMB protocol.
% sharectl set -p server_signing_required=true smb
Example 5 Setting Property for SMB Client
The following command sets the value of the client_signing_required
property for the SMB protocol.
% sharectl set -p client_signing_required=true smb
Example 6 Setting Tracing of RPC Calls for autofs
The following command expands each RPC call to autofs and logs it to
the location specified for that service in automountd(8).
# sharectl set -p trace=1 autofs
Example 7 Requiring Client to Use a Reserved Port for NFS Calls Shared
With AUTH_SYS
The following command requires client to use a reserved port for NFS
calls shared with AUTH_SYS.
# sharectl set -p resvport=true nfs
EXIT STATUS
0 Successful completion.
non-zero Command failed.
FILES
/usr/include/libshare.h Error codes used for exit status.
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE TYPEAT‐
TRIBUTE VALUE _ Availabilitysystem/core-os _ Interface StabilityCommit‐
ted
SEE ALSO
autofs(5), nfs(5), smb(5), user_attr(5), attributes(7), rbac(7),
smf(7), standards(7), automount(8), automountd(8), lockd(8), mountd(8),
nfsd(8), nfsmapid(8)
Oracle Solaris 11.4 10 Mar 2023 sharectl(8)