svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
semaphore(3c)
Standard C Library Functions semaphore(3C)
NAME
semaphore, sema_init, sema_destroy, sema_wait, sema_trywait, sema_post
- semaphores
SYNOPSIS
cc [ flag... ] file... [ library... ]
#include <synch.h>
int sema_init(sema_t *sp, unsigned int count, int type,
void * arg);
int sema_destroy(sema_t *sp);
int sema_wait(sema_t *sp);
int sema_trywait(sema_t *sp);
int sema_post(sema_t *sp);
DESCRIPTION
A semaphore is a non-negative integer count and is generally used to
coordinate access to resources. The initial semaphore count is set to
the number of free resources, then threads slowly increment and decre‐
ment the count as resources are added and removed. If the semaphore
count drops to 0, which means no available resources, threads attempt‐
ing to decrement the semaphore will block until the count is greater
than 0.
Semaphores can synchronize threads in this process and other processes
if they are allocated in writable memory and shared among the cooperat‐
ing processes (see mmap(2)), and have been initialized for this pur‐
pose.
Semaphores must be initialized before use; semaphores pointed to by sp
to count are initialized by sema_init(). The type argument can assign
several different types of behavior to a semaphore. No current type
uses arg, although it may be used in the future.
The type argument may be one of the following:
USYNC_PROCESS The semaphore can synchronize threads in this process
and other processes. Initializing the semaphore should
be done by only one process. A semaphore initialized
with this type must be allocated in memory shared
between processes, either in Sys V shared memory (see
shmop(2)), or in memory mapped to a file (see
mmap(2)). It is illegal to initialize the object this
way and not allocate it in such shared memory. arg is
ignored.
USYNC_THREAD The semaphore can synchronize threads only in this
process. The arg argument is ignored. USYNC_THREAD
does not support multiple mappings to the same logical
synch object. If you need to mmap() a synch object to
different locations within the same address space,
then the synch object should be initialized as a
shared object USYNC_PROCESS for Solaris threads and
PTHREAD_PROCESS_PRIVATE for POSIX threads.
A semaphore must not be simultaneously initialized by multiple threads,
nor re-initialized while in use by other threads.
Default semaphore initialization (intra-process):
sema_t sp;
int count = 1;
sema_init(&sp, count, NULL, NULL);
or
sema_init(&sp, count, USYNC_THREAD, NULL);
Customized semaphore initialization (inter-process):
sema_t sp;
int count = 1;
sema_init(&sp, count, USYNC_PROCESS, NULL);
The sema_destroy() function destroys any state related to the semaphore
pointed to by sp. The semaphore storage space is not released.
The sema_wait() function blocks the calling thread until the semaphore
count pointed to by sp is greater than 0, and then it atomically decre‐
ments the count.
The sema_trywait() function atomically decrements the semaphore count
pointed to by sp, if the count is greater than 0; otherwise, it returns
an error.
The sema_post() function atomically increments the semaphore count
pointed to by sp. If there are any threads blocked on the semaphore,
one will be unblocked.
The semaphore functionality described on this man page is for the
Solaris threads implementation. For the POSIX-conforming semaphore
interface documentation, see sem_close(3C), sem_destroy(3C), sem_get‐
value(3C), sem_init(3C), sem_open(3C), sem_post(3C), sem_unlink(3C),
and sem_wait(3C).
RETURN VALUES
Upon successful completion, 0 is returned; otherwise, a non-zero value
indicates an error.
ERRORS
These functions will fail if:
EINVAL The sp argument does not refer to a valid semaphore.
EFAULT Either the sp or arg argument points to an illegal address.
The sema_wait() function will fail if:
EINTR The wait was interrupted by a signal or fork().
The sema_trywait() function will fail if:
EBUSY The semaphore pointed to by sp has a 0 count.
The sema_post() function will fail if:
EOVERFLOW The semaphore value pointed to by sp exceeds
SEM_VALUE_MAX.
EXAMPLES
Example 1 The customer waiting-line in a bank is analogous to the syn‐
chronization scheme of a semaphore using sema_wait() and sema_try‐
wait():
/* cc [ flag ... ] file ... [ library ... ] */
#include <errno.h>
#define TELLERS 10
sema_t tellers; /* semaphore */
int banking_hours(), deposit_withdrawal;
void*customer(), do_business(), skip_banking_today();
...
sema_init(&tellers, TELLERS, USYNC_THREAD, NULL);
/* 10 tellers available */
while(banking_hours())
pthread_create(NULL, NULL, customer, deposit_withdrawal);
...
void *
customer(int deposit_withdrawal)
{
int this_customer, in_a_hurry = 50;
this_customer = rand() % 100;
if (this_customer == in_a_hurry) {
if (sema_trywait(&tellers) != 0)
if (errno == EBUSY){ /* no teller available */
skip_banking_today(this_customer);
return;
} /* else go immediately to available teller and
decrement tellers */
}
else
sema_wait(&tellers); /* wait for next teller, then
proceed, and decrement tellers */
do_business(deposit_withdrawal);
sema_post(&tellers); /* increment tellers; this_customer's
teller is now available */
}
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE TYPEAT‐
TRIBUTE VALUE _ MT-LevelAsync-Signal-Safe
SEE ALSO
mmap(2), shmop(2), sem_close(3C), sem_destroy(3C), sem_getvalue(3C),
sem_init(3C), sem_open(3C), sem_post(3C), sem_unlink(3C), sem_wait(3C),
attributes(7), standards(7)
NOTES
These functions are also available by way of:
#include <thread.h>
By default, there is no defined order of unblocking for multiple
threads waiting for a semaphore.
Oracle Solaris 11.4 21 Mar 2013 semaphore(3C)