svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
scsi_init_pkt(9f)
scsi_init_pkt(9F) Kernel Functions scsi_init_pkt(9F)
NAME
scsi_init_pkt - prepare a complete SCSI packet
SYNOPSIS
#include <sys/scsi/scsi.h>
struct scsi_pkt *scsi_init_pkt(struct scsi_address *ap,
struct scsi_pkt *pktp, struct buf *bp, int cmdlen, int statuslen,
int privatelen, int flags, int (*callback)(caddr_t), caddr_t arg);
INTERFACE LEVEL
Solaris DDI specific (Solaris DDI).
PARAMETERS
ap
Pointer to a scsi_address(9S) structure.
pktp
A pointer to a scsi_pkt(9S) structure.
bp
Pointer to a buf(9S) structure.
cmdlen
The required length for the SCSI command descriptor block (CDB) in
bytes.
statuslen
The required length for the SCSI status completion block (SCB) in
bytes. Valid values are:
0
No status back.
1
Return SCSI status byte.
sizeof(struct scsi_arq_status)
Return status information in a scsi_arq_status structure. This
will include up to SENSE_LENGTH bytes of sense data. Please re‐
fer to scsi_arq_status(9S) for more information.
For extra sense length packets (PKT_XARQ flag asserted), set
statuslen to be a greater number like, (N + sizeof(struct
scsi_arq_status)) where N is the number of extra bytes beyond
the default SENSE_LENGTH. For example, N=1 requests
SENSE_LENGTH + 1 bytes of sense.
privatelen
The required length for the pkt_private area.
flags
Flags modifier.
callback
A pointer to a callback function, NULL_FUNC, or SLEEP_FUNC.
arg
The callback function argument.
DESCRIPTION
Target drivers use scsi_init_pkt() to request the transport layer to
allocate and initialize a packet for a SCSI command which possibly in‐
cludes a data transfer. If pktp is NULL, a new scsi_pkt(9S) is allo‐
cated using the HBA driver's packet allocator. The bp is a pointer to a
buf(9S) structure. If bp is non-NULL and contains a valid byte count,
the buf(9S) structure is also set up for DMA transfer using the HBA
driver DMA resources allocator. When bp is allocated by scsi_alloc_con‐
sistent_buf(9F), the PKT_CONSISTENT bit must be set in the flags argu‐
ment to ensure proper operation. If privatelen is non-zero then addi‐
tional space is allocated for the pkt_private area of the scsi_pkt(9S).
On return pkt_private points to this additional space. Otherwise
pkt_private is a pointer that is typically used to store the bp during
execution of the command. In this case pkt_private is NULL on return.
The flags argument is a set of bit flags. Possible bits include:
PKT_CONSISTENT
This must be set if the DMA buffer was allocated using scsi_al‐
loc_consistent_buf(9F). In this case, the HBA driver will guarantee
that the data transfer is properly synchronized before performing
the target driver's command completion callback.
PKT_DMA_PARTIAL
This may be set if the driver can accept a partial DMA mapping. If
set, scsi_init_pkt() will allocate DMA resources with the
DDI_DMA_PARTIAL bit set in the dmar_flag element of the
ddi_dma_req(9S) structure. The pkt_resid field of the scsi_pkt(9S)
structure may be returned with a non-zero value, which indicates
the number of bytes for which scsi_init_pkt() was unable to allo‐
cate DMA resources. In this case, a subsequent call to
scsi_init_pkt() may be made for the same pktp and bp to adjust the
DMA resources to the next portion of the transfer. This sequence
should be repeated until the pkt_resid field is returned with a
zero value, which indicates that with transport of this final por‐
tion the entire original request will have been satisfied.
PKT_XARQ
Setting this flag requests that the HBA return extra sense data for
this scsi_pkt(9S). The default auto request sense mechanism returns
up to SENSE_LENGTH bytes. More than SENSE_LENGTH bytes of sense
data can be requested by setting this flag and setting the sta‐
tuslen correctly. Set the statuslen to be the sizeof(struct
scsi_arq_status) plus the number of sense bytes needed beyond
SENSE_LENGTH. For example, set statuslen to be (SENSE_LENGTH + 5)
for extra 5 bytes of sense.
When calling scsi_init_pkt() to move already-allocated DMA resources,
the cmdlen, statuslen, and privatelen fields are ignored.
The last argument arg is supplied to the callback function when it is
invoked.
callback indicates what the allocator routines should do when resources
are not available:
NULL_FUNC Do not wait for resources. Return a NULL pointer.
SLEEP_FUNC Wait indefinitely for resources.
Other Values callback points to a function which is called when re‐
sources may have become available. callback must return
either 0 (indicating that it attempted to allocate re‐
sources but again failed to do so), in which case it is
put back on a list to be called again later, or 1 indi‐
cating either success in allocating resources or indi‐
cating that it no longer cares for a retry.
When allocating DMA resources, scsi_init_pkt() returns the scsi_pkt
field pkt_resid as the number of residual bytes for which the system
was unable to allocate DMA resources. A pkt_resid of 0 means that all
necessary DMA resources were allocated.
RETURN VALUES
The scsi_init_pkt() function returns NULL if the packet or DMA re‐
sources could not be allocated. Otherwise, it returns a pointer to an
initialized scsi_pkt(9S). If pktp was not NULL the return value will be
pktp on successful initialization of the packet.
CONTEXT
If callback is SLEEP_FUNC, then this routine can be called only from
user or kernel context. Otherwise, it can be called from user, inter‐
rupt, or kernel context. The callback function may not block or call
routines that block.
EXAMPLES
Example 1 Allocating a Packet Without DMA Resources Attached
To allocate a packet without DMA resources attached, use:
pkt = scsi_init_pkt(&devp->sd_address, NULL, NULL, CDB_GROUP1,
1, sizeof (struct my_pkt_private *), 0,
sd_runout, sd_unit);
Example 2 Allocating a Packet With DMA Resources Attached
To allocate a packet with DMA resources attached use:
pkt = scsi_init_pkt(&devp->sd_address, NULL, bp, CDB_GROUP1,
sizeof(struct scsi_arq_status), 0, 0, NULL_FUNC, NULL);
Example 3 Attaching DMA Resources to a Preallocated Packet
To attach DMA resources to a preallocated packet, use:
pkt = scsi_init_pkt(&devp->sd_address, old_pkt, bp, 0,
0, 0, 0, sd_runout, (caddr_t) sd_unit);
Example 4 Allocating a Packet with Consistent DMA Resources Attached
Since the packet is already allocated, the cmdlen, statuslen and pri‐
vatelen are 0. To allocate a packet with consistent DMA resources at‐
tached, use:
bp = scsi_alloc_consistent_buf(&devp->sd_address, NULL,
SENSE_LENGTH, B_READ, SLEEP_FUNC, NULL);
pkt = scsi_init_pkt(&devp->sd_address, NULL, bp, CDB_GROUP0,
sizeof(struct scsi_arq_status), sizeof (struct my_pkt_private *),
PKT_CONSISTENT, SLEEP_FUNC, NULL);
Example 5 Allocating a Packet with Partial DMA Resources Attached
To allocate a packet with partial DMA resources attached, use:
my_pkt = scsi_init_pkt(&devp->sd_address, NULL, bp, CDB_GROUP0,
1, sizeof (struct buf *), PKT_DMA_PARTIAL,
SLEEP_FUNC, NULL);
SEE ALSO
scsi_alloc_consistent_buf(9F), scsi_destroy_pkt(9F), scsi_dmaget(9F),
scsi_pktalloc(9F), buf(9S), ddi_dma_req(9S), scsi_address(9S),
scsi_pkt(9S)
Writing Device Drivers in Oracle Solaris 11.4
NOTES
If a DMA allocation request fails with DDI_DMA_NOMAPPING, the B_ERROR
flag will be set in bp, and the b_error field will be set to EFAULT.
If a DMA allocation request fails with DDI_DMA_TOOBIG, the B_ERROR flag
will be set in bp, and the b_error field will be set to EINVAL.
Oracle Solaris 11.4 23 Jun 2020 scsi_init_pkt(9F)