svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
pthread_getattr_np(3)
PTHREAD_GETATTR_NP(3) Linux Programmer's Manual PTHREAD_GETATTR_NP(3)
NAME
pthread_getattr_np - get attributes of created thread
SYNOPSIS
#define _GNU_SOURCE /* See feature_test_macros(7) */
#include <pthread.h>
int pthread_getattr_np(pthread_t thread, pthread_attr_t *attr);
Compile and link with -pthread.
DESCRIPTION
The pthread_getattr_np() function initializes the thread attributes ob‐
ject referred to by attr so that it contains actual attribute values
describing the running thread thread.
The returned attribute values may differ from the corresponding at‐
tribute values passed in the attr object that was used to create the
thread using pthread_create(3). In particular, the following attrib‐
utes may differ:
* the detach state, since a joinable thread may have detached itself
after creation;
* the stack size, which the implementation may align to a suitable
boundary.
* and the guard size, which the implementation may round upward to a
multiple of the page size, or ignore (i.e., treat as 0), if the ap‐
plication is allocating its own stack.
Furthermore, if the stack address attribute was not set in the thread
attributes object used to create the thread, then the returned thread
attributes object will report the actual stack address that the imple‐
mentation selected for the thread.
When the thread attributes object returned by pthread_getattr_np() is
no longer required, it should be destroyed using pthread_attr_de‐
stroy(3).
RETURN VALUE
On success, this function returns 0; on error, it returns a nonzero er‐
ror number.
ERRORS
ENOMEM Insufficient memory.
In addition, if thread refers to the main thread, then
pthread_getattr_np() can fail because of errors from various underlying
calls: fopen(3), if /proc/self/maps can't be opened; and getrlimit(2),
if the RLIMIT_STACK resource limit is not supported.
VERSIONS
This function is available in glibc since version 2.2.3.
ATTRIBUTES
For an explanation of the terms used in this section, see attrib‐
utes(7). allbox; lbw20 lb lb l l l. Interface Attribute Value T{
pthread_getattr_np() T} Thread safety MT-Safe
CONFORMING TO
This function is a nonstandard GNU extension; hence the suffix "_np"
(nonportable) in the name.
EXAMPLE
The program below demonstrates the use of pthread_getattr_np(). The
program creates a thread that then uses pthread_getattr_np() to re‐
trieve and display its guard size, stack address, and stack size at‐
tributes. Command-line arguments can be used to set these attributes
to values other than the default when creating the thread. The shell
sessions below demonstrate the use of the program.
In the first run, on an x86-32 system, a thread is created using de‐
fault attributes:
$ ulimit -s # No stack limit ==> default stack size is 2 MB
unlimited
$ ./a.out
Attributes of created thread:
Guard size = 4096 bytes
Stack address = 0x40196000 (EOS = 0x40397000)
Stack size = 0x201000 (2101248) bytes
In the following run, we see that if a guard size is specified, it is
rounded up to the next multiple of the system page size (4096 bytes on
x86-32):
$ ./a.out -g 4097
Thread attributes object after initializations:
Guard size = 4097 bytes
Stack address = (nil)
Stack size = 0x0 (0) bytes
Attributes of created thread:
Guard size = 8192 bytes
Stack address = 0x40196000 (EOS = 0x40397000)
Stack size = 0x201000 (2101248) bytes
In the last run, the program manually allocates a stack for the thread.
In this case, the guard size attribute is ignored.
$ ./a.out -g 4096 -s 0x8000 -a
Allocated thread stack at 0x804d000
Thread attributes object after initializations:
Guard size = 4096 bytes
Stack address = 0x804d000 (EOS = 0x8055000)
Stack size = 0x8000 (32768) bytes
Attributes of created thread:
Guard size = 0 bytes
Stack address = 0x804d000 (EOS = 0x8055000)
Stack size = 0x8000 (32768) bytes
Program source
#define _GNU_SOURCE /* To get pthread_getattr_np() declaration */
#include <pthread.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <errno.h>
#define handle_error_en(en, msg) \
do { errno = en; perror(msg); exit(EXIT_FAILURE); } while (0)
static void
display_stack_related_attributes(pthread_attr_t *attr, char *prefix)
{
int s;
size_t stack_size, guard_size;
void *stack_addr;
s = pthread_attr_getguardsize(attr, &guard_size);
if (s != 0)
handle_error_en(s, "pthread_attr_getguardsize");
printf("%sGuard size = %d bytes\n", prefix, guard_size);
s = pthread_attr_getstack(attr, &stack_addr, &stack_size);
if (s != 0)
handle_error_en(s, "pthread_attr_getstack");
printf("%sStack address = %p", prefix, stack_addr);
if (stack_size > 0)
printf(" (EOS = %p)", (char *) stack_addr + stack_size);
printf("\n");
printf("%sStack size = 0x%x (%d) bytes\n",
prefix, stack_size, stack_size);
}
static void
display_thread_attributes(pthread_t thread, char *prefix)
{
int s;
pthread_attr_t attr;
s = pthread_getattr_np(thread, &attr);
if (s != 0)
handle_error_en(s, "pthread_getattr_np");
display_stack_related_attributes(&attr, prefix);
s = pthread_attr_destroy(&attr);
if (s != 0)
handle_error_en(s, "pthread_attr_destroy");
}
static void * /* Start function for thread we create */
thread_start(void *arg)
{
printf("Attributes of created thread:\n");
display_thread_attributes(pthread_self(), "\t");
exit(EXIT_SUCCESS); /* Terminate all threads */
}
static void
usage(char *pname, char *msg)
{
if (msg != NULL)
fputs(msg, stderr);
fprintf(stderr, "Usage: %s [-s stack-size [-a]]"
" [-g guard-size]\n", pname);
fprintf(stderr, "\t\t-a means program should allocate stack\n");
exit(EXIT_FAILURE);
}
static pthread_attr_t * /* Get thread attributes from command line */
get_thread_attributes_from_cl(int argc, char *argv[],
pthread_attr_t *attrp)
{
int s, opt, allocate_stack;
long stack_size, guard_size;
void *stack_addr;
pthread_attr_t *ret_attrp = NULL; /* Set to attrp if we initialize
a thread attributes object */
allocate_stack = 0;
stack_size = -1;
guard_size = -1;
while ((opt = getopt(argc, argv, "ag:s:")) != -1) {
switch (opt) {
case 'a': allocate_stack = 1; break;
case 'g': guard_size = strtoul(optarg, NULL, 0); break;
case 's': stack_size = strtoul(optarg, NULL, 0); break;
default: usage(argv[0], NULL);
}
}
if (allocate_stack && stack_size == -1)
usage(argv[0], "Specifying -a without -s makes no sense\n");
if (argc > optind)
usage(argv[0], "Extraneous command-line arguments\n");
if (stack_size >= 0 || guard_size > 0) {
ret_attrp = attrp;
s = pthread_attr_init(attrp);
if (s != 0)
handle_error_en(s, "pthread_attr_init");
}
if (stack_size >= 0) {
if (!allocate_stack) {
s = pthread_attr_setstacksize(attrp, stack_size);
if (s != 0)
handle_error_en(s, "pthread_attr_setstacksize");
} else {
s = posix_memalign(&stack_addr, sysconf(_SC_PAGESIZE),
stack_size);
if (s != 0)
handle_error_en(s, "posix_memalign");
printf("Allocated thread stack at %p\n\n", stack_addr);
s = pthread_attr_setstack(attrp, stack_addr, stack_size);
if (s != 0)
handle_error_en(s, "pthread_attr_setstacksize");
}
}
if (guard_size >= 0) {
s = pthread_attr_setguardsize(attrp, guard_size);
if (s != 0)
handle_error_en(s, "pthread_attr_setstacksize");
}
return ret_attrp;
}
int
main(int argc, char *argv[])
{
int s;
pthread_t thr;
pthread_attr_t attr;
pthread_attr_t *attrp = NULL; /* Set to &attr if we initialize
a thread attributes object */
attrp = get_thread_attributes_from_cl(argc, argv, &attr);
if (attrp != NULL) {
printf("Thread attributes object after initializations:\n");
display_stack_related_attributes(attrp, "\t");
printf("\n");
}
s = pthread_create(&thr, attrp, &thread_start, NULL);
if (s != 0)
handle_error_en(s, "pthread_create");
if (attrp != NULL) {
s = pthread_attr_destroy(attrp);
if (s != 0)
handle_error_en(s, "pthread_attr_destroy");
}
pause(); /* Terminates when other thread calls exit() */
}
SEE ALSO
pthread_attr_getaffinity_np(3), pthread_attr_getdetachstate(3),
pthread_attr_getguardsize(3), pthread_attr_getinheritsched(3),
pthread_attr_getschedparam(3), pthread_attr_getschedpolicy(3),
pthread_attr_getscope(3), pthread_attr_getstack(3),
pthread_attr_getstackaddr(3), pthread_attr_getstacksize(3),
pthread_attr_init(3), pthread_create(3), pthreads(7)
COLOPHON
This page is part of release 5.02 of the Linux man-pages project. A
description of the project, information about reporting bugs, and the
latest version of this page, can be found at
https://www.kernel.org/doc/man-pages/.
Linux 2019-03-06 PTHREAD_GETATTR_NP(3)