svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
psradm(8)
psradm(8) System Administration Commands psradm(8)
NAME
psradm - change processor operational status
SYNOPSIS
psradm -f | -i | -n | -s [-v] [-F] processor_id
psradm -a -f | -i | -n | -s [-v] [-F]
DESCRIPTION
The psradm utility changes the operational status of processors. The
legal states for the processor are on-line, off-line, spare, faulted,
and no-intr.
An on-line processor processes LWPs (lightweight processes) and can be
interrupted by I/O devices in the system.
An off-line processor does not process any LWPs. Usually, an off-line
processor is not interruptible by I/O devices in the system. On some
processors or under certain conditions, it might not be possible to
disable interrupts for an off-line processor. Thus, the actual effect
of being off-line might vary from machine to machine.
A spare processor does not process any LWPs. A spare processor can be
brought on-line, off-line or to no-intr by a privileged user of the
system or by the kernel in response to changes in the system state.
A faulted processor is identified by the kernel, which monitors the be‐
havior of processors over time. A privileged user can set the state of
a faulted processor to be on-line, off-line, spare or no-intr, but must
use the force option to do so.
A no-intr processor processes LWPs but is not interruptible by I/O de‐
vices.
A processor can not be taken off-line or made spare if there are LWPs
that are bound to the processor unless the additional -F option is
used. The -F option removes processor bindings of such LWPs before
changing the processor's operational status. On some architectures, it
might not be possible to take certain processors off-line or spare if,
for example, the system depends on some resource provided by the
processor.
At least one processor in the system must be able to process LWPs. At
least one processor must also be able to be interrupted. Since an off-
line or spare processor can be interruptible, it is possible to have an
operational system with one processor no-intr and all other processors
off-line or spare but with one or more accepting interrupts.
If any of the specified processors are powered off, psradm might power
on one or more processors.
Only users with the PRIV_SYS_RES_CONFIG privilege can use the psradm
utility.
OPTIONS
The following options are supported:
-a Perform the action on all processors, or as many as possible.
-f Take the specified processors off-line.
-F Force the transition to the additional specified state. Required
if one or more of the specified processors was in the faulted
state. Set the specified processors to faulted, if no other tran‐
sition option was specified. Forced transitions can only be made
to faulted, spare, or off-line states. Administrators are encour‐
aged to use the -Q option for pbind(8) to find out which threads
will be affected by forced a processor state transition.
-i Set the specified processors no-intr.
-n Bring the specified processors on-line.
-s Make the specified processors spare.
-v Output a message giving the results of each attempted operation.
OPERANDS
The following operands are supported:
processor_id The processor ID of the processor to be set on-line or
off-line, spare, or no-intr.
Specify processor_id as an individual processor number
(for example, 3), multiple processor numbers separated
by spaces (for example, 1 2 3), or a range of processor
numbers (for example, 1-4). It is also possible to com‐
bine ranges and (individual or multiple) processor_ids
(for example, 1-3 5 7-8 9).
EXAMPLES
Example 1 Setting Processors to off-line
The following example sets processors 2 and 3 off-line:
% psradm -f 2 3
Example 2 Setting Processors to no-intr
The following example sets processors 1 and 2 no-intr:
% psradm -i 1 2
Example 3 Setting Processors to spare
The following example sets processors 1 and 2 spare, even if either of
the processors was in the faulted state:
% psradm -F -s 1 2
Example 4 Setting All Processors on-line
% psradm -a -n
Example 5 Forcing Processors to off-line
The following example sets processors 1 and 2 offline, and revokes the
processor bindings from the processes bound to them:
% psradm -F -f 1 2
EXIT STATUS
The following exit values are returned:
0 Successful completion.
>0 An error occurred.
FILES
/etc/wtmpx Records logging processor status changes
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE TYPEAT‐
TRIBUTE VALUE _ Availabilitysystem/core-os
SEE ALSO
processor_bind(2), p_online(2), attributes(7), pbind(8), psrinfo(8),
psrset(8)
DIAGNOSTICS
psradm: processor 4: Invalid argument
The specified processor does not exist in the configuration.
psradm: processor 3: Device busy
The specified processor could not be taken off-line because it ei‐
ther has LWPs bound to it, is the last on-line processor in the
system, or is needed by the system because it provides some essen‐
tial service.
psradm: processor 3: Device busy
The specified processor could not be set no-intr because it is the
last interruptible processor in the system, or or it is the only
processor in the system that can service interrupts needed by the
system.
psradm: processor 3: Device busy
The specified processor is powered off, and it cannot be powered on
because some platform-specific resource is unavailable.
psradm: processor 0: Insufficient privileges
The user does not have permission to change processor status.
psradm: processor 2: Operation not supported
The specified processor is powered off, and the platform does not
support power on of individual processors.
Oracle Solaris 11.4 18 August 2020 psradm(8)