svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
pread(2)
read(2) System Calls read(2)
NAME
read, readv, pread, preadv - read from file
SYNOPSIS
#include <unistd.h>
ssize_t read(int fildes, void *buf, size_t nbyte);
ssize_t pread(int fildes, void *buf, size_t nbyte, off_t offset);
#include <sys/uio.h>
ssize_t readv(int fildes, const struct iovec *iov, int iovcnt);
ssize_t preadv(int fildes, const struct iovec *iov, int iovcnt,
off_t offset);
DESCRIPTION
The read() function attempts to read nbyte bytes from the file associ‐
ated with the open file descriptor, fildes, into the buffer pointed to
by buf.
If nbyte is 0, read() returns 0 and has no other results.
On files that support seeking (for example, a regular file), the read
operation starts at a position in the file given by the file pointer
associated with fildes. The file pointer is incremented by the number
of bytes actually read.
Files that do not support seeking (for example, terminals) always read
from the current position. The value of a file pointer associated with
such a file is undefined.
If fildes refers to a socket, read() is equivalent to recv() with no
flags set.
No data transfer will occur past the current end-of-file. If the start‐
ing position is at or after the end-of-file, 0 will be returned. If the
file refers to a device special file, the result of subsequent read()
requests is implementation-dependent.
When attempting to read from a regular file with mandatory file/record
locking set (see chmod(2)), if there is a write lock owned by another
process on the segment of the file to be read:
o If O_NDELAY or O_NONBLOCK is set, read() returns −1 and sets
errno to EAGAIN.
o If O_NDELAY and O_NONBLOCK are clear, read() sleeps until
the blocking record lock is removed.
When attempting to read from an empty pipe or FIFO:
o If no process has the pipe open for writing, read() returns
0 to indicate end-of-file.
o If a process has the pipe open for writing and O_NDELAY is
set, read() returns 0.
o If a process has the pipe open for writing and O_NONBLOCK is
set, read() returns −1 and sets errno to EAGAIN.
o If O_NDELAY and O_NONBLOCK are clear, read() blocks until
data is written to the pipe or the pipe is closed by all
processes that had opened the pipe for writing.
When attempting to read a file associated with a terminal that has no
data currently available:
o If O_NDELAY is set, read() returns 0.
o If O_NONBLOCK is set, read() returns −1 and sets errno to
EAGAIN.
o If O_NDELAY and O_NONBLOCK are clear, read() blocks until
data become available.
When attempting to read a file associated with a socket or a stream
that is not a pipe, a FIFO, or a terminal, and the file has no data
currently available:
o If O_NDELAY or O_NONBLOCK is set, read() returns −1 and sets
errno to EAGAIN.
o If O_NDELAY and O_NONBLOCK are clear, read() blocks until
data becomes available.
The read() function reads data previously written to a file. If any
portion of a regular file prior to the end-of-file has not been writ‐
ten, read() returns bytes with value 0. For example, lseek(2) allows
the file pointer to be set beyond the end of existing data in the file.
If data is later written at this point, subsequent reads in the gap be‐
tween the previous end of data and the newly written data will return
bytes with value 0 until data is written into the gap.
For regular files, no data transfer will occur past the offset maximum
established in the open file description associated with fildes.
Upon successful completion, if nbyte is greater than 0, read() will
mark to update the st_atime field of the file, and return the number of
bytes read. This number is never greater than nbyte. The value returned
may be less than nbyte if the number of bytes left in the file is less
than nbyte, if the read() request was interrupted by a signal, or if
the file is a pipe or FIFO or special file and has fewer than nbyte
bytes immediately available for reading. For example, a read() from a
file associated with a terminal may return one typed line of data.
If a read() is interrupted by a signal before it reads any data, it
will return −1 with errno set to EINTR.
If a read() is interrupted by a signal after it has successfully read
some data, it will return the number of bytes read.
A read() from a streams file can read data in three different modes:
byte-stream mode, message-nondiscard mode, and message-discard mode.
The default is byte-stream mode. This can be changed using the I_SRDOPT
ioctl(2) request, and can be tested with the I_GRDOPT ioctl(). In
byte-stream mode, read() retrieves data from the stream until as many
bytes as requested are transferred, or until there is no more data to
be retrieved. Byte-stream mode ignores message boundaries.
In streams message-nondiscard mode, read() retrieves data until as many
bytes as requested are transferred, or until a message boundary is
reached. If read() does not retrieve all the data in a message, the re‐
maining data is left on the stream, and can be retrieved by the next
read() call. Message-discard mode also retrieves data until as many
bytes as requested are transferred, or a message boundary is reached.
However, unread data remaining in a message after the read() returns is
discarded, and is not available for a subsequent read(), readv() or
getmsg(2) call.
How read() handles zero-byte streams messages is determined by the cur‐
rent read mode setting. In byte-stream mode, read() accepts data until
it has read nbyte bytes, or until there is no more data to read, or un‐
til a zero-byte message block is encountered. The read() function then
returns the number of bytes read, and places the zero-byte message back
on the stream to be retrieved by the next read(), readv() or getmsg(2).
In message-nondiscard mode or message-discard mode, a zero-byte message
returns 0 and the message is removed from the stream. When a zero-byte
message is read as the first message on a stream, the message is re‐
moved from the stream and 0 is returned, regardless of the read mode.
A read() from a streams file returns the data in the message at the
front of the stream head read queue, regardless of the priority band of
the message.
By default, streams are in control-normal mode, in which a read() from
a streams file can only process messages that contain a data part but
do not contain a control part. The read() fails if a message containing
a control part is encountered at the stream head. This default action
can be changed by placing the stream in either control-data mode or
control-discard mode with the I_SRDOPT ioctl() command. In control-
data mode, read() converts any control part to data and passes it to
the application before passing any data part originally present in the
same message. In control-discard mode, read() discards message control
parts but returns to the process any data part in the message.
In addition, read() and readv() fails if the stream head has processed
an asynchronous error before the call. In this case, the value of errno
does not reflect the result of read() or readv() but reflects the prior
error. If a hangup occurs on the stream being read, read() continues to
operate normally until the stream head read queue is empty. Thereafter,
it returns 0.
readv()
The readv() function is equivalent to read(), but places the input data
into the iovcnt buffers specified by the members of the iov array:
iov[0], iov[1], ..., iov[iovcnt−1]. The iovcnt argument is valid if
greater than 0 and less than or equal to {IOV_MAX}.
The iovec structure contains the following members:
void *iov_base;
size_t iov_len;
Each iovec entry specifies the base address and length of an area in
memory where data should be placed. The readv() function always fills
an area completely before proceeding to the next.
Upon successful completion, readv() marks for update the st_atime field
of the file.
pread() and preadv()
The pread() and preadv() functions perform the same action as read()
and readv(), respectively, except that it reads from a given position
in the file without changing the file pointer. The first three argu‐
ments to pread() and preadv() are the same as read() and readv(), re‐
spectively, with the addition of a fourth argument offset for the de‐
sired position inside the file. pread() and preadv() will read up to
the maximum offset value that can be represented in an off_t for regu‐
lar files. An attempt to perform a pread() or preadv() on a file that
is incapable of seeking results in an error.
RETURN VALUES
Upon successful completion, read() and readv() return a non-negative
integer indicating the number of bytes actually read. Otherwise, the
functions return −1 and set errno to indicate the error.
ERRORS
The read(), readv(), pread(), and preadv() functions will fail if:
EACCES The file has the av_quarantined system attribute set.
EADI The buffer pointed to by buf or a buffer specified in the
iov array is enabled for ADI, and an ADI version mismatch is
detected while the system writes data to the buffer. For
more information, see the adi(3C) man page.
EAGAIN Mandatory file/record locking was set, O_NDELAY or O_NON‐
BLOCK was set, and there was a blocking record lock; total
amount of system memory available when reading using raw I/O
is temporarily insufficient; no data is waiting to be read
on a file associated with a tty device and O_NONBLOCK was
set; or no message is waiting to be read on a stream and
O_NDELAY or O_NONBLOCK was set.
EBADF The fildes argument is not a valid file descriptor open for
reading.
EBADMSG Message waiting to be read on a stream is not a data mes‐
sage.
EDEADLK The read was going to go to sleep and cause a deadlock to
occur.
EINTR A signal was caught during the read operation and no data
was transferred.
EINVAL An attempt was made to read from a stream linked to a multi‐
plexor.
EIO A physical I/O error has occurred, or the process is in a
background process group and is attempting to read from its
controlling terminal, and either the process is ignoring or
blocking the SIGTTIN signal or the process group of the
process is orphaned.
EISDIR The fildes argument refers to a directory on a file system
type that does not support read operations on directories.
ENOLCK The system record lock table was full, so the read() or
readv() could not go to sleep until the blocking record lock
was removed.
ENOLINK The fildes argument is on a remote machine and the link to
that machine is no longer active.
ENXIO The device associated with fildes is a block special or
character special file and the value of the file pointer is
out of range.
The read() and pread() functions will fail if:
EFAULT The buf argument points to an illegal address.
EINVAL The nbyte argument overflowed an ssize_t.
The read() and readv() functions will fail if:
EOVERFLOW The file is a regular file, nbyte is greater than 0, the
starting position is before the end-of-file, and the
starting position is greater than or equal to the offset
maximum established in the open file description associ‐
ated with fildes.
The readv() and preadv() functions may fail if:
EFAULT The iov argument points outside the allocated address space.
EINVAL The iovcnt argument was less than or equal to 0 or greater
than {IOV_MAX}. See Intro(2) for a definition of {IOV_MAX}).
One of the iov_len values in the iov array was negative, or
the sum of the iov_len values in the iov array overflowed an
ssize_t.
The pread() and preadv() functions will fail if:
ESPIPE The fildes argument is associated with a file that is inca‐
pable of seeking, such as a pipe, FIFO, or socket.
USAGE
The pread() and preadv() functions have a transitional interface for
64-bit file offsets. See lf64(7).
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE TYPEAT‐
TRIBUTE VALUE _ Interface StabilityCommitted _ MT-LevelAsync-Signal-
Safe _ StandardSee standards(7).
SEE ALSO
chmod(2), creat(2), dup(2), fcntl(2), getmsg(2), Intro(2), ioctl(2),
lseek(2), open(2), pipe(2), streamio(4I), termio(4I), attributes(7),
lf64(7), standards(7), sysattr(7)
HISTORY
The pread() function was added to Solaris in Solaris 2.0.
The preadv() function was added to Oracle Solaris in Solaris 11.4.69.
The read() and readv() functions have been included in all Sun and Ora‐
cle releases of Solaris.
Oracle Solaris 11.4 8 Jan 2024 read(2)