nslookup(1) 맨 페이지 - 윈디하나의 솔라나라
|
|
개요
- 솔라나라에 설명된 어플리케이션에 대해 맨 페이지를 찾아 출력한다.
- MAN 페이지에 대한 설명은 윈디하나의 솔라나라: MAN 페이지을 참고하자.
svcadm(8)
을 검색하려면 섹션
에서 8
을 선택하고, 맨 페이지 이름
에 svcadm
을 입력하고 검색을 누른다.
nslookup(1)
NSLOOKUP(1) BIND9 NSLOOKUP(1)
NAME
nslookup - query Internet name servers interactively
SYNOPSIS
nslookup [-option] [name | -] [server]
DESCRIPTION
Nslookup is a program to query Internet domain name servers. Nslookup
has two modes: interactive and non-interactive. Interactive mode allows
the user to query name servers for information about various hosts and
domains or to print a list of hosts in a domain. Non-interactive mode
is used to print just the name and requested information for a host or
domain.
ARGUMENTS
Interactive mode is entered in the following cases:
1. when no arguments are given (the default name server will be used)
2. when the first argument is a hyphen (-) and the second argument is
the host name or Internet address of a name server.
Non-interactive mode is used when the name or Internet address of the
host to be looked up is given as the first argument. The optional
second argument specifies the host name or address of a name server.
Options can also be specified on the command line if they precede the
arguments and are prefixed with a hyphen. For example, to change the
default query type to host information, and the initial timeout to 10
seconds, type:
nslookup -query=hinfo -timeout=10
The -version option causes nslookup to print the version number and
immediately exits.
INTERACTIVE COMMANDS
host [server]
Look up information for host using the current default server or
using server, if specified. If host is an Internet address and the
query type is A or PTR, the name of the host is returned. If host
is a name and does not have a trailing period, the search list is
used to qualify the name.
To look up a host not in the current domain, append a period to the
name.
server domain
lserver domain
Change the default server to domain; lserver uses the initial
server to look up information about domain, while server uses the
current default server. If an authoritative answer can't be found,
the names of servers that might have the answer are returned.
root
not implemented
finger
not implemented
ls
not implemented
view
not implemented
help
not implemented
?
not implemented
exit
Exits the program.
set keyword[=value]
This command is used to change state information that affects the
lookups. Valid keywords are:
all
Prints the current values of the frequently used options to
set. Information about the current default server and host is
also printed.
class=value
Change the query class to one of:
IN
the Internet class
CH
the Chaos class
HS
the Hesiod class
ANY
wildcard
The class specifies the protocol group of the information.
(Default = IN; abbreviation = cl)
[no]debug
Turn on or off the display of the full response packet and any
intermediate response packets when searching.
(Default = nodebug; abbreviation = [no]deb)
[no]d2
Turn debugging mode on or off. This displays more about what
nslookup is doing.
(Default = nod2)
domain=name
Sets the search list to name.
[no]search
If the lookup request contains at least one period but doesn't
end with a trailing period, append the domain names in the
domain search list to the request until an answer is received.
(Default = search)
port=value
Change the default TCP/UDP name server port to value.
(Default = 53; abbreviation = po)
querytype=value
type=value
Change the type of the information query.
(Default = A and then AAAA; abbreviations = q, ty)
Note: It is only possible to specify one query type, only the
default behavior looks up both when an alternative is not
specified.
[no]recurse
Tell the name server to query other servers if it does not have
the information.
(Default = recurse; abbreviation = [no]rec)
ndots=number
Set the number of dots (label separators) in a domain that will
disable searching. Absolute names always stop searching.
retry=number
Set the number of retries to number.
timeout=number
Change the initial timeout interval for waiting for a reply to
number seconds.
[no]vc
Always use a virtual circuit when sending requests to the
server.
(Default = novc)
[no]fail
Try the next nameserver if a nameserver responds with SERVFAIL
or a referral (nofail) or terminate query (fail) on such a
response.
(Default = nofail)
RETURN VALUES
nslookup returns with an exit status of 1 if any query failed, and 0
otherwise.
IDN SUPPORT
If nslookup has been built with IDN (internationalized domain name)
support, it can accept and display non-ASCII domain names. nslookup
appropriately converts character encoding of domain name before sending
a request to DNS server or displaying a reply from the server. If you'd
like to turn off the IDN support for some reason, define the
IDN_DISABLE environment variable. The IDN support is disabled if the
variable is set when nslookup runs or when the standard output is not a
tty.
FILES
/etc/resolv.conf
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
box; cbp-1 | cbp-1 l | l . ATTRIBUTE TYPE ATTRIBUTE VALUE =
Availability network/dns/bind = Stability Pass-through uncommitted
SEE ALSO
dig(1), host(1), named(8).
AUTHOR
Internet Systems Consortium, Inc.
COPYRIGHT
Copyright © 2004-2007, 2010, 2013-2021 Internet Systems Consortium,
Inc. ("ISC")
NOTES
Source code for open source software components in Oracle Solaris can
be found at https://www.oracle.com/downloads/opensource/solaris-source-
code-downloads.html.
This software was built from source available at
https://github.com/oracle/solaris-userland. The original community
source was downloaded from
http://ftp.isc.org/isc/bind9/9.11.36/bind-9.11.36.tar.gz.
Further information about this software can be found on the open source
community website at http://www.isc.org/software/bind/.
ISC 2014-01-24 NSLOOKUP(1)
맨 페이지 내용의 저작권은 맨 페이지 작성자에게 있습니다.