개요

• 솔라나라에 설명된 어플리케이션에 대해 맨 페이지를 찾아 출력한다.
• MAN 페이지에 대한 설명은 윈디하나의 솔라나라: MAN 페이지을 참고하자.
• svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.

lpr(1)

lpr(1)                           OpenPrinting                           lpr(1)

NAME
       lpr - print files

SYNOPSIS
       lpr  [  -H server[:port] ] [ -E ] [ -U username ] [ -P destination[/in‐
       stance] ] [ -# num-copies [ -h ] [ -l ] [ -m ] [ -o option[=value] ]  [
       -p ] [ -q ] [ -r ] [ -C title ] [ -J title ] [ -T title ] [ file(s) ]

DESCRIPTION
       lpr  submits  files  for printing.  Files named on the command line are
       sent to the named printer or the default destination if no  destination
       is  specified.   If  no files are listed on the command-line, lpr reads
       the print file from the standard input.

   THE DEFAULT DESTINATION
       CUPS provides many ways to set the default destination. The LPDEST  and
       PRINTER environment variables are consulted first.  If neither are set,
       the  current  default  set using the lpoptions(1) command is used, fol‐
       lowed by the default set using the lpadmin(8) command.

OPTIONS
       The following options are recognized by lpr:

       -E   Forces encryption when connecting to the server.

       -H server[:port]
            Specifies an alternate server.  Note: This option must  occur  be‐
            fore all others.

       -C "name"

       -J "name"

       -T "name"
            Sets the job name/title.

       -P destination[/instance]
            Prints files to the named printer.

       -U username
            Specifies an alternate username.

       -# copies
            Sets the number of copies to print.

       -h   Disables   banner  printing.  This  option  is  equivalent  to  -o
            job-sheets=none.

       -l   Specifies that the print file is already formatted for the  desti‐
            nation  and  should  be  sent  without  filtering.  This option is
            equivalent to -o raw.

       -m   Send an email on job completion.

       -o option[=value]
            Sets a job option.  See "COMMON JOB OPTIONS" below.

       -p   Specifies that the print file should be formatted  with  a  shaded
            header  with  the date, time, job name, and page number.  This op‐
            tion is equivalent to -o  prettyprint  and  is  only  useful  when
            printing text files.

       -q   Hold job for printing.

       -r   Specifies  that the named print files should be deleted after sub‐
            mitting them.

   COMMON JOB OPTIONS
       Aside from the printer-specific options reported  by  the  lpoptions(1)
       command, the following generic options are available:

       -o job-sheets=name
            Prints a cover page (banner) with the document.  The "name" can be
            "classified",  "confidential",  "secret", "standard", "topsecret",
            or "unclassified".

       -o media=size
            Sets the page size to size. Most printers  support  at  least  the
            size names "a4", "letter", and "legal".

       -o number-up={2|4|6|9|16}
            Prints  2,  4,  6,  9, or 16 document (input) pages on each output
            page.

       -o orientation-requested=4
            Prints the job in landscape  (rotated  90  degrees  counter-clock‐
            wise).

       -o orientation-requested=5
            Prints the job in landscape (rotated 90 degrees clockwise).

       -o orientation-requested=6
            Prints the job in reverse portrait (rotated 180 degrees).

       -o print-quality=3

       -o print-quality=4

       -o print-quality=5
            Specifies the output quality - draft (3), normal (4), or best (5).

       -o sides=one-sided
            Prints on one side of the paper.

       -o sides=two-sided-long-edge
            Prints on both sides of the paper for portrait output.

       -o sides=two-sided-short-edge
            Prints on both sides of the paper for landscape output.


ATTRIBUTES
       See attributes(7) for descriptions of the following attributes:

       box; cbp-1 | cbp-1 l | l .  ATTRIBUTE TYPE ATTRIBUTE VALUE = Availabil‐
       ity   print/cups = Stability Volatile

NOTES
       The -c, -d, -f, -g, -i, -n, -t, -v, and -w options are not supported by
       CUPS and produce a warning message if used.

       Source  code  for open source software components in Oracle Solaris can
       be found at https://www.oracle.com/downloads/opensource/solaris-source-
       code-downloads.html.

       This software was built from source available at:
       https://github.com/oracle/solaris-userland

       The original community source was downloaded from:
       https://github.com/OpenPrinting/cups/releases/down‐
       load/v2.4.15/cups-2.4.15-source.tar.gz

       Further information about this software can be found on the open source
       community website at http://www.cups.org/.

EXAMPLES
       Print two copies of a document to the default printer:

           lpr -# 2 filename

       Print a double-sided legal document to a printer called "foo":

           lpr -P foo -o media=legal -o sides=two-sided-long-edge filename

       Print a presentation document 2-up to a printer called "foo":

           lpr -P foo -o number-up=2 filename

SEE ALSO
       cancel(1), lp(1), lpadmin(8), lpoptions(1), lpq(1), lprm(1), lpstat(1),
       CUPS Online Help (http://localhost:631/help)

COPYRIGHT
       Copyright © 2020-2024 by OpenPrinting.


2022-05-02                           CUPS                               lpr(1)