lpadmin(8) 맨 페이지 - 윈디하나의 솔라나라
|
|
개요
- 솔라나라에 설명된 어플리케이션에 대해 맨 페이지를 찾아 출력한다.
- MAN 페이지에 대한 설명은 윈디하나의 솔라나라: MAN 페이지을 참고하자.
svcadm(8)을 검색하려면 섹션
에서 8 을 선택하고, 맨 페이지 이름
에 svcadm을 입력하고 검색을 누른다.
lpadmin(8)
lpadmin(8) OpenPrinting lpadmin(8)
NAME
lpadmin - configure cups printers and classes
SYNOPSIS
lpadmin [ -E ] [ -U username ] [ -h server[:port] ] -d destination
lpadmin [ -E ] [ -U username ] [ -h server[:port] ] -p destination [ -R
name-default ] option(s)
lpadmin [ -E ] [ -U username ] [ -h server[:port] ] -x destination
DESCRIPTION
lpadmin configures printer and class queues provided by CUPS. It can
also be used to set the server default printer or class.
When specified before the -d, -p, or -x options, the -E option forces
encryption when connecting to the server.
The first form of the command (-d) sets the default printer or class to
destination. Subsequent print jobs submitted via the lp(1) or lpr(1)
commands will use this destination unless the user specifies otherwise
with the lpoptions(1) command.
The second form of the command (-p) configures the named printer or
class. The additional options are described below.
The third form of the command (-x) deletes the printer or class desti‐
nation. Any jobs that are pending for the destination will be removed
and any job that is currently printed will be aborted.
OPTIONS
The following options are recognized when configuring a printer queue:
-c class
Adds the named printer to class. If class does not exist it is
created automatically.
-m model
Sets a standard PPD file for the printer from the model directory
or using one of the driver interfaces. Use the -m option with the
lpinfo(8) command to get a list of supported models. The model
"raw" clears any existing PPD file and the model "everywhere"
queries the printer referred to by the specified IPP device-uri.
Note: Models other than "everywhere" are deprecated and will not
be supported in a future version of CUPS.
-o cupsIPPSupplies=true
-o cupsIPPSupplies=false
Specifies whether IPP supply level values should be reported.
-o cupsSNMPSupplies=true
-o cupsSNMPSupplies=false
Specifies whether SNMP supply level (RFC 3805) values should be
reported.
-o job-k-limit=value
Sets the kilobyte limit for per-user quotas. The value is an in‐
teger number of kilobytes; one kilobyte is 1024 bytes.
-o job-page-limit=value
Sets the page limit for per-user quotas. The value is the integer
number of pages that can be printed; double-sided pages are
counted as two pages.
-o job-quota-period=value
Sets the accounting period for per-user quotas. The value is an
integer number of seconds; 86,400 seconds are in one day.
-o job-sheets-default=banner
-o job-sheets-default=banner,banner
Sets the default banner page(s) to use for print jobs.
-o name=value
Sets a PPD option for the printer. PPD options can be listed us‐
ing the -l option with the lpoptions(1) command.
-o name-default=value
Sets a default server-side option for the destination. Any print-
time option can be defaulted, e.g., "-o number-up-default=2" to
set the default "number-up" option value to 2.
-o port-monitor=name
Sets the binary communications program to use when printing,
"none", "bcp", or "tbcp". The default program is "none". The
specified port monitor must be listed in the printer's PPD file.
-o printer-error-policy=name
Sets the policy for errors such as printers that cannot be found
or accessed, don't support the format being printed, fail during
submission of the print data, or cause one or more filters to
crash. The name must be one of "abort-job" (abort the job on er‐
ror), "retry-job" (retry the job at a future time), "retry-cur‐
rent-job" (retry the current job immediately), or "stop-printer"
(stop the printer on error). The default error policy is "stop-
printer" for printers and "retry-current-job" for classes.
-o printer-is-shared=true
-o printer-is-shared=false
Sets the destination to shared/published or unshared/unpublished.
Shared/published destinations are publicly announced by the server
on the LAN based on the browsing configuration in cupsd.conf,
while unshared/unpublished destinations are not announced. The
default value is "true".
-o printer-op-policy=name
Sets the IPP operation policy associated with the destination.
The name must be defined in the cupsd.conf in a Policy section.
The default operation policy is "default".
-R name-default
Deletes the named option from printer.
-r class
Removes the named printer from class. If the resulting class be‐
comes empty it is removed.
-u allow:{user|@group}{,user|,@group}*
-u deny:{user|@group}{,user|,@group}*
-u allow:all
-u deny:none
Sets user-level access control on a destination. Names starting
with "@" are interpreted as UNIX groups. The latter two forms
turn user-level access control off. Note: The user 'root' is not
granted special access - using "-u allow:foo,bar" will allow users
'foo' and 'bar' to access the printer but NOT 'root'.
-v "device-uri"
Sets the device-uri attribute of the printer queue. Use the -v
option with the lpinfo(8) command to get a list of supported de‐
vice URIs and schemes.
-D "info"
Provides a textual description of the destination.
-E When specified before the -d, -p, or -x options, forces the use of
TLS encryption on the connection to the scheduler. Otherwise, en‐
ables the destination and accepts jobs; this is the same as run‐
ning the cupsaccept(8) and cupsenable(8) programs on the destina‐
tion.
-L "location"
Provides a textual location of the destination.
DEPRECATED OPTIONS
The following lpadmin options are deprecated:
-i filename
This option historically has been used to provide either a System
V interface script or (as an implementation side-effect) a PPD
file. Note: Interface scripts are not supported by CUPS. PPD
files and printer drivers are deprecated and will not be supported
in a future version of CUPS.
-P ppd-file
Specifies a PostScript Printer Description (PPD) file to use with
the printer. Note: PPD files and printer drivers are deprecated
and will not be supported in a future version of CUPS.
CONFORMING TO
Unlike the System V printing system, CUPS allows printer names to con‐
tain any printable character except SPACE, TAB, "/", or "#". Also,
printer and class names are not case-sensitive.
Finally, the CUPS version of lpadmin may ask the user for an access
password depending on the printing system configuration. This differs
from the System V version which requires the root user to execute this
command.
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
box; cbp-1 | cbp-1 l | l . ATTRIBUTE TYPE ATTRIBUTE VALUE = Availabil‐
ity print/cups = Stability Volatile
NOTES
CUPS printer drivers and backends are deprecated and will no longer be
supported in a future feature release of CUPS. Printers that do not
support IPP can be supported using applications such as
ippeveprinter(1).
The CUPS version of lpadmin does not support all of the System V or So‐
laris printing system configuration options.
Interface scripts are not supported for security reasons.
The double meaning of the -E option is an unfortunate historical odd‐
ity.
The lpadmin command communicates with the scheduler (cupsd) to make
changes to the printing system configuration. This configuration in‐
formation is stored in several files including printers.conf and
classes.conf. These files should not be edited directly and are an im‐
plementation detail of CUPS that is subject to change at any time.
Source code for open source software components in Oracle Solaris can
be found at https://www.oracle.com/downloads/opensource/solaris-source-
code-downloads.html.
This software was built from source available at:
https://github.com/oracle/solaris-userland
The original community source was downloaded from:
https://github.com/OpenPrinting/cups/releases/down‐
load/v2.4.15/cups-2.4.15-source.tar.gz
Further information about this software can be found on the open source
community website at http://www.cups.org/.
EXAMPLE
Create an IPP Everywhere print queue:
lpadmin -p myprinter -E -v ipp://myprinter.local/ipp/print -m everywhere
SEE ALSO
cupsaccept(8), cupsenable(8), lpinfo(8), lpoptions(1), CUPS Online Help
(http://localhost:631/help)
COPYRIGHT
Copyright © 2020-2024 by OpenPrinting.
2021-02-28 CUPS lpadmin(8)
맨 페이지 내용의 저작권은 맨 페이지 작성자에게 있습니다.
