개요

• 솔라나라에 설명된 어플리케이션에 대해 맨 페이지를 찾아 출력한다.
• MAN 페이지에 대한 설명은 윈디하나의 솔라나라: MAN 페이지을 참고하자.
• svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.

lp(1)

lp(1)                            OpenPrinting                            lp(1)

NAME
       lp - print files

SYNOPSIS
       lp  [  -h hostname[:port] ] [ -E ] [ -U username ] [ -c ] [ -d destina‐
       tion[/instance] ] [ -m ] [ -n num-copies ] [ -o option[=value] ]  [  -q
       priority  ] [ -s ] [ -t title ] [ -H handling ] [ -P page-list ] [ -- ]
       [ file(s) ]
       lp [ -h hostname[:port] ] [ -E ] [ -U username ] [ -c ] [ -i job-id ] [
       -n num-copies ] [ -o option[=value] ] [ -q priority ] [ -t title ] [ -H
       handling ] [ -P page-list ]

DESCRIPTION
       lp submits files for printing or alters a pending job.  Use a  filename
       of "-" to force printing from the standard input.

   THE DEFAULT DESTINATION
       CUPS  provides many ways to set the default destination. The LPDEST and
       PRINTER environment variables are consulted first.  If neither are set,
       the current default set using the lpoptions(1) command  is  used,  fol‐
       lowed by the default set using the lpadmin(8) command.

OPTIONS
       The following options are recognized by lp:

       --   Marks  the end of options; use this to print a file whose name be‐
            gins with a dash (-).

       -E   Forces encryption when connecting to the server.

       -U username
            Specifies the username to use when connecting to the server.

       -c   This option is provided for backwards-compatibility only. On  sys‐
            tems  that  support  it,  this  option forces the print file to be
            copied to the spool directory before  printing.   In  CUPS,  print
            files  are always sent to the scheduler via IPP which has the same
            effect.

       -d destination
            Prints files to the named printer.

       -h hostname[:port]
            Chooses an alternate server.  Note: This option must occur  before
            all others.

       -i job-id
            Specifies an existing job to modify.

       -m   Sends an email when the job is completed.

       -n copies
            Sets the number of copies to print.

       -o "name=value [ ... name=value ]"
            Sets one or more job options.  See "COMMON JOB OPTIONS" below.

       -q priority
            Sets  the  job priority from 1 (lowest) to 100 (highest).  The de‐
            fault priority is 50.

       -s   Do not report the resulting job IDs (silent mode.)

       -t "name"
            Sets the job name.

       -H hh:mm

       -H hold

       -H immediate

       -H restart

       -H resume
            Specifies when the job should be printed.  A  value  of  immediate
            will print the file immediately, a value of hold will hold the job
            indefinitely, and a UTC time value (HH:MM) will hold the job until
            the  specified  UTC  (not local) time.  Use a value of resume with
            the -i option to resume a held job.  Use a value of  restart  with
            the -i option to restart a completed job.

       -P page-list
            Specifies which pages to print in the document.  The list can con‐
            tain a list of numbers and ranges (#-#) separated by commas, e.g.,
            "1,3-5,16".   The  page  numbers refer to the output pages and not
            the document's original pages - options like "number-up"  can  af‐
            fect the numbering of the pages.

   COMMON JOB OPTIONS
       Aside  from  the  printer-specific options reported by the lpoptions(1)
       command, the following generic options are available:

       -o job-sheets=name
            Prints a cover page (banner) with the document.  The "name" can be
            "classified", "confidential", "secret",  "standard",  "topsecret",
            or "unclassified".

       -o media=size
            Sets  the  page  size  to size. Most printers support at least the
            size names "a4", "letter", and "legal".

       -o number-up={2|4|6|9|16}
            Prints 2, 4, 6, 9, or 16 document (input)  pages  on  each  output
            page.

       -o orientation-requested=4
            Prints  the  job  in  landscape (rotated 90 degrees counter-clock‐
            wise).

       -o orientation-requested=5
            Prints the job in landscape (rotated 90 degrees clockwise).

       -o orientation-requested=6
            Prints the job in reverse portrait (rotated 180 degrees).

       -o print-as-raster
            Prints the job as raster.

       -o print-quality=3

       -o print-quality=4

       -o print-quality=5
            Specifies the output quality - draft (3), normal (4), or best (5).

       -o sides=one-sided
            Prints on one side of the paper.

       -o sides=two-sided-long-edge
            Prints on both sides of the paper for portrait output.

       -o sides=two-sided-short-edge
            Prints on both sides of the paper for landscape output.

CONFORMING TO
       Unlike the System V printing system, CUPS allows printer names to  con‐
       tain  any  printable  character  except SPACE, TAB, "/", or "#".  Also,
       printer and class names are not case-sensitive.

       The -q option accepts a different range of values than the  Solaris  lp
       command,  matching  the  IPP job priority values (1-100, 100 is highest
       priority) instead of the Solaris values (0-39, 0 is highest priority).

EXAMPLES
       Print two copies of a document to the default printer:

           lp -n 2 filename

       Print a double-sided legal document to a printer called "foo":

           lp -d foo -o media=legal -o sides=two-sided-long-edge filename

       Print a presentation document 2-up to a printer called "bar":

           lp -d bar -o number-up=2 filename


ATTRIBUTES
       See attributes(7) for descriptions of the following attributes:

       box; cbp-1 | cbp-1 l | l .  ATTRIBUTE TYPE ATTRIBUTE VALUE = Availabil‐
       ity   print/cups = Stability Volatile

SEE ALSO
       cancel(1),  lpadmin(8),  lpoptions(1),  lpq(1),  lpr(1),  lprm(1),  lp‐
       stat(1), CUPS Online Help (http://localhost:631/help)

COPYRIGHT
       Copyright © 2020-2024 by OpenPrinting.



NOTES
       Source  code  for open source software components in Oracle Solaris can
       be found at https://www.oracle.com/downloads/opensource/solaris-source-
       code-downloads.html.

       This software was built from source available at:
       https://github.com/oracle/solaris-userland

       The original community source was downloaded from:
       https://github.com/OpenPrinting/cups/releases/down‐
       load/v2.4.15/cups-2.4.15-source.tar.gz

       Further information about this software can be found on the open source
       community website at http://www.cups.org/.

2022-05-02                           CUPS                                lp(1)