svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
keyname(3x)
curs_util(3x) Library calls curs_util(3x)
NAME
delay_output, filter, flushinp, getwin, key_name, keyname, nofilter,
putwin, unctrl, use_env, use_tioctl, wunctrl - miscellaneous curses
utility routines
SYNOPSIS
#include <ncursesw/curses.h>
const char * unctrl(chtype ch);
wchar_t * wunctrl(cchar_t * wch);
const char * keyname(int c);
const char * key_name(wchar_t wc);
void filter(void);
/* extension */
void nofilter(void);
void use_env(bool bf);
/* extension */
void use_tioctl(bool bf);
int putwin(WINDOW * win, FILE * filep);
WINDOW * getwin(FILE * filep);
int delay_output(int ms);
int flushinp(void);
DESCRIPTION
unctrl, wunctrl
unctrl returns a null-terminated character string printably represent‐
ing the curses character ch, often one that originated in keyboard in‐
put; see getch(3X).
• Printable characters represent themselves as a one-character
string.
• Control characters are expressed in ^X notation, where X is the
printable symbol of the control code's value plus 32 in the
ISO 646/“ASCII” character set.
• DEL (character code 127) is represented as ^?.
• A character code greater than 127 is represented in one of two
ways.
If the screen has not been initialized or is in meta mode (see
meta(3X)), it is expressed in M-X notation, where X is the repre‐
sentation of the code's value minus 128, as described above.
If the screen is not in meta mode, the character code is assumed to
represent itself. It nevertheless may not be printable; this is
the case for character codes 128-159 in ISO 8859 encodings.
ncurses's use_legacy_coding(3X) function configures unctrl's han‐
dling of these character codes.
wunctrl returns a null-terminated wide-character string printably rep‐
resenting the curses complex character wch.
Both functions ignore the attributes and color pair selection of their
argument.
keyname, key_name
The keyname routine returns a character string corresponding to the key
c. Key codes are different from character codes.
• Key codes below 256 are characters. They are displayed using unc‐
trl.
• Values above 256 may be the codes for function keys. The function
key name is displayed.
• Otherwise (if there is no corresponding name and the key is not a
character) the function returns null, to denote an error. X/Open
also lists an “UNKNOWN KEY” return value, which some implementa‐
tions return rather than null.
The corresponding key_name returns a multibyte character string corre‐
sponding to the wide-character value wc. The two functions (keyname
and key_name) do not return the same set of strings:
• keyname returns null where key_name would display a meta character.
• key_name does not return the name of a function key.
filter, nofilter
The filter routine, if used, must be called before initscr or newterm
are called. Calling filter causes these changes in initialization:
• LINES is set to 1;
• the capabilities clear, cud1, cud, cup, cuu1, cuu, vpa are dis‐
abled;
• the capability ed is disabled if bce is set;
• and the home string is set to the value of cr.
The nofilter routine cancels the effect of a preceding filter call.
That allows the caller to initialize a screen on a different device,
using a different value of $TERM. The limitation arises because the
filter routine modifies the in-memory copy of the terminal information.
use_env
The use_env routine, if used, should be called before initscr or
newterm are called (because those compute the screen size). It modi‐
fies the way ncurses treats environment variables when determining the
screen size.
• Normally ncurses looks first at the terminal database for the
screen size.
If use_env was called with FALSE for parameter, it stops here un‐
less use_tioctl was also called with TRUE for parameter.
• Then it asks for the screen size via operating system calls. If
successful, it overrides the values from the terminal database.
• Finally (unless use_env was called with FALSE parameter), ncurses
examines the LINES or COLUMNS environment variables, using a value
in those to override the results from the operating system or ter‐
minal database.
curses also updates the screen size in response to SIGWINCH, unless
overridden by the LINES or COLUMNS environment variables,
use_tioctl
The use_tioctl routine, if used, should be called before initscr or
newterm are called (because those compute the screen size). After
use_tioctl is called with TRUE as an argument, ncurses modifies the
last step in its computation of screen size as follows:
• checks whether the LINES and COLUMNS environment variables are set
to a number greater than zero.
• for each, ncurses updates the corresponding environment variable
with the value that it has obtained via operating system call or
from the terminal database.
• ncurses re-fetches the value of the environment variables so that
it is still the environment variables that set the screen size.
The use_env and use_tioctl routines combine as follows.
lB lB lB lB lB lx. use_env use_tioctl Summary _
TRUE FALSE T{ ncurses uses operating system calls unless
overridden by LINES or COLUMNS environment variables; default.
T} TRUE TRUE T{ ncurses updates LINES and COLUMNS based on oper‐
ating system calls. T} FALSE TRUE T{ ncurses ignores LINES
and COLUMNS, using operating system calls to obtain size. T}
putwin, getwin
The putwin routine writes all data associated with window (or pad) win
into the file to which filep points. This information can be later re‐
trieved using the getwin function.
The getwin routine reads window related data stored in the file by
putwin. The routine then creates and initializes a new window using
that data. It returns a pointer to the new window. There are a few
caveats:
• the data written is a copy of the WINDOW structure, and its associ‐
ated character cells. The format differs between the wide-charac‐
ter (ncursesw) and non-wide (ncurses) libraries. You can transfer
data between the two, however.
• the retrieved window is always created as a top-level window (or
pad), rather than a subwindow.
• the window's character cells contain the color pair value, but not
the actual color numbers. If cells in the retrieved window use
color pairs that have not been created in the application using
init_pair, they will not be colored when the window is refreshed.
delay_output
The delay_output routine inserts an ms millisecond pause in output.
Employ this function judiciously when terminal output uses padding, be‐
cause ncurses transmits null characters (consuming CPU and I/O re‐
sources) instead of sleeping and requesting resumption from the operat‐
ing system. Padding is used unless:
• the terminal description has npc (no_pad_char) capability, or
• the environment variable NCURSES_NO_PADDING is set.
If padding is not in use, ncurses uses napms to perform the delay. If
the value of ms exceeds 30,000 (thirty seconds), it is capped at that
value.
flushinp
The flushinp routine throws away any typeahead that has been typed by
the user and has not yet been read by the program.
RETURN VALUE
Except for flushinp, functions that return integers return ERR upon
failure and OK upon success.
Functions that return pointers return NULL on error.
In ncurses,
• flushinp returns ERR if the terminal was not initialized, and
• putwin returns ERR if its associated write(2) calls return ERR.
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
box; cbp-1 | cbp-1 l | l . ATTRIBUTE TYPE ATTRIBUTE VALUE = Availabil‐
ity library/ncurses = Stability Uncommitted
NOTES
wunctrl is part of ncurses's wide-character API, and is not available
in its non-wide configuration.
Source code for open source software components in Oracle Solaris can
be found at https://www.oracle.com/downloads/opensource/solaris-source-
code-downloads.html.
This software was built from source available at:
https://github.com/oracle/solaris-userland
The original community source was downloaded from:
https://invisible-mirror.net/archives/ncurses/cur‐
rent/ncurses-6.5-20250614.tgz
Further information about this software can be found on the open source
community website at https://invisible-island.net/ncurses/.
PORTABILITY
X/Open Curses Issue 4 describes these functions. It specifies no error
conditions for them.
SVr4 describes a successful return value only as “an integer value
other than ERR”.
filter
The SVr4 documentation describes the action of filter only in the
vaguest terms. The description here is adapted from X/Open Curses
(which erroneously fails to describe the disabling of cuu).
delay_output padding
The limitation to 30 seconds and the use of napms differ from other im‐
plementations.
• SVr4 curses does not delay if no padding character is available.
• NetBSD curses uses napms when no padding character is available,
but does not take timing into account when using the padding char‐
acter.
Neither limits the delay.
keyname
The keyname function may return the names of user-defined string capa‐
bilities that are defined in the terminfo entry via the -x option of
tic. This implementation automatically assigns at run-time key codes
to user-defined strings that begin with “k”. The key codes start at
KEY_MAX, but are not guaranteed to be the same value for different runs
because user-defined codes are merged from all terminal descriptions
that have been loaded. The use_extended_names(3X) function controls
whether this data is loaded when the terminal description is read by
the library.
nofilter, use_tioctl
The nofilter and use_tioctl routines are specific to ncurses. They
were not supported on Version 7, BSD or System V implementations. It
is recommended that any code depending on ncurses extensions be condi‐
tioned using NCURSES_VERSION.
putwin/getwin file-format
The putwin and getwin functions have several issues with portability:
• The files written and read by these functions use an implementa‐
tion-specific format. Although the format is an obvious target for
standardization, it has been overlooked.
Interestingly enough, according to the copyright dates in Solaris
source, the functions (along with scr_init, etc.) originated with
the University of California, Berkeley (in 1982) and were later (in
1988) incorporated into SVr4. Oddly, there are no such functions
in the 4.3BSD curses sources.
• Most implementations simply dump the binary WINDOW structure to the
file. These include SVr4 curses, NetBSD curses, and PDCurses, as
well as older ncurses versions. This implementation (as well as
xcurses, the X/Open variant of Solaris curses, dated 1995) uses
textual dumps.
The implementations that use binary dumps use block I/O (write(2)
and read(2) functions). Those that use textual dumps use buffered
I/O. A few applications may happen to write extra data in the file
using these functions. Doing that can run into problems mixing
block and buffered I/O. This implementation reduces the problem on
writes by flushing the output. However, reading from a file writ‐
ten using mixed schemes may not be successful.
unctrl, wunctrl
X/Open Curses Issue 4 describes these functions. It specifies no error
conditions for them. It states that unctrl and wunctrl will return a
null pointer if unsuccessful. This implementation checks for three
cases:
• the parameter is a 7-bit US-ASCII code. This is the case that
X/Open Curses documented.
• the parameter is in the range 128-159, i.e., a C1 control code. If
use_legacy_coding(3X) has been called with a 2 parameter, unctrl
returns the parameter, i.e., a one-character string with the para‐
meter as the first character. Otherwise, it returns “~@”, “~A”,
etc., analogous to “^@”, “^A”, C0 controls.
X/Open Curses does not document whether unctrl can be called before
initializing curses. This implementation permits that, and returns
the “~@”, etc., values in that case.
• parameter values outside the 0 to 255 range. unctrl returns a null
pointer.
The strings returned by unctrl in this implementation are determined at
compile time, showing C1 controls from the upper-128 codes with a “~”
prefix rather than “^”. Other implementations have different conven‐
tions. For example, they may show both sets of control characters with
“^”, and strip the parameter to 7 bits. Or they may ignore C1 controls
and treat all of the upper-128 codes as printable. This implementation
uses 8 bits but does not modify the string to reflect locale. The
use_legacy_coding(3X) function allows the caller to change the output
of unctrl.
Likewise, the meta(3X) function allows the caller to change the output
of keyname, i.e., it determines whether to use the “M-” prefix for
“meta” keys (codes in the range 128 to 255). Both
use_legacy_coding(3X) and meta(3X) succeed only after curses is ini‐
tialized. X/Open Curses does not document the treatment of codes 128
to 159. When treating them as “meta” keys (or if keyname is called be‐
fore initializing curses), this implementation returns strings “M-^@”,
“M-^A”, etc.
X/Open Curses documents unctrl as declared in <unctrl.h>, which ncurses
does. However, ncurses' <curses.h> includes <unctrl.h>, matching the
behavior of SVr4 curses. Other implementations may not do that.
use_env, use_tioctl
If ncurses is configured to provide the sp-functions extension, the
state of use_env and use_tioctl may be updated before creating each
screen rather than once only (curs_sp_funcs(3X)). This feature of
use_env is not provided by other implementations of curses.
HISTORY
4BSD (1980) introduced unctrl, defining it as a macro in unctrl.h.
SVr2 (1984) added delay_output, flushinp, and keyname.
SVr3 (1987) supplied filter. Later that year, SVr3.1 brought getwin
and putwin, reading and writing window dumps with fread(3) and
fwrite(3), respectively.
SVr4 (1989) furnished use_env.
X/Open Curses Issue 4 (1995) specified key_name and wunctrl.
ncurses 5.6 (2006) added nofilter, and 6.0 (2015) use_tioctl.
SEE ALSO
curses(3X), curs_initscr(3X), curs_inopts(3X), curs_kernel(3X),
curs_scr_dump(3X), curs_sp_funcs(3X), curs_variables(3X),
legacy_coding(3X)
ncurses 6.5 2025-04-05 curs_util(3x)