개요

• 솔라나라에 설명된 어플리케이션에 대해 맨 페이지를 찾아 출력한다.
• MAN 페이지에 대한 설명은 윈디하나의 솔라나라: MAN 페이지을 참고하자.
• svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.

ixgbe(4)

IXGBE(4)                 BSD Kernel Interfaces Manual                 IXGBE(4)

NAME
     ixgbe — Intel(R) 10Gb Ethernet driver for the FreeBSD operating system

SYNOPSIS
     To compile this driver into the kernel, place the following line in your
     kernel configuration file:

           device ixgbe

     Alternatively, to load the driver as a module at boot time, place the
     following line in loader.conf(5):

           if_ixgbe_load="YES"

DESCRIPTION
     The ixgbe driver provides support for PCI 10Gb Ethernet adapters based on
     the Intel 82598EB Intel(R) Network Connections.  The driver supports
     Jumbo Frames, MSIX, TSO, and RSS.

     For questions related to hardware requirements, refer to the documenta‐
     tion supplied with your Intel 10GbE adapter.  All hardware requirements
     listed apply to use with FreeBSD.

     Support for Jumbo Frames is provided via the interface MTU setting.
     Selecting an MTU larger than 1500 bytes with the ifconfig(8) utility con‐
     figures the adapter to receive and transmit Jumbo Frames.  The maximum
     MTU size for Jumbo Frames is 16114.

     This driver version supports VLANs.  For information on enabling VLANs,
     see ifconfig(8).

HARDWARE
     The ixgbe driver supports the following cards:

     ·   Intel(R) 10 Gigabit XF SR/AF Dual Port Server Adapter
     ·   Intel(R) 10 Gigabit XF SR/LR Server Adapter
     ·   Intel(R) 82598EB 10 Gigabit AF Network Connection
     ·   Intel(R) 82598EB 10 Gigabit AT CX4 Network Connection

DIAGNOSTICS
     ixgbe%d: Unable to allocate bus resource: memory  A fatal initialization
     error has occurred.

     ixgbe%d: Unable to allocate bus resource: interrupt  A fatal initializa‐
     tion error has occurred.

     ixgbe%d: watchdog timeout -- resetting  The device has stopped responding
     to the network, or there is a problem with the network connection
     (cable).

SUPPORT
     For general information and support, go to the Intel support website at:
     http://support.intel.com.

     If an issue is identified with the released source code on the supported
     kernel with a supported adapter, email the specific information related
     to the issue to ⟨freebsd@intel.com⟩.

SEE ALSO
     altq(4), arp(4), netintro(4), ng_ether(4), polling(4), vlan(4),
     ifconfig(8)

HISTORY
     The ixgbe device driver first appeared in FreeBSD 7.0.

AUTHORS
     The ixgbe driver was written by Intel Corporation <freebsd@intel.com>.

BSD                            December 19, 2010                           BSD