svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
ipsecalgs(8)
ipsecalgs(8) System Administration Commands ipsecalgs(8)
NAME
ipsecalgs - configure the IPsec protocols and algorithms table
SYNOPSIS
ipsecalgs
ipsecalgs -l
ipsecalgs -s
ipsecalgs -a [-P protocol-number | -p protocol-name] -k keylen-list
[-i inc] [-K default-keylen] -b blocklen-list -n alg-names
-N alg-number -m mech-name [-I initialization-vector_length]
[-M MAC-length] [-S length-of-salt] [-F flags] [-f] [-s]
ipsecalgs -P protocol-number -p protocol-name
[-e exec-mode] [-f] [-s]
ipsecalgs -r -p protocol-name -n alg-name [-s]
ipsecalgs -r -p protocol-name -N alg-number [-s]
ipsecalgs -R -P protocol-number [-s]
ipsecalgs -R -p protocol-name [-s]
ipsecalgs -e exec-mode -P protocol-number [-s]
ipsecalgs -e exec-mode -p protocol-name [-s]
DESCRIPTION
Use the ipsecalgs command to query and modify the IPsec protocol and
algorithms stored in /etc/inet/ipsecalgs. You can use the ipsecalgs
command to do the following:
o list the currently defined IPsec protocols and algorithms
o modify IPsec protocols definitions
o modify IPsec algorithms definitions
Never edit the /etc/inet/ipsecalgs file manually. The valid IPsec pro‐
tocols and algorithms are described by the ISAKMP DOI. See RFC 2407. In
the general sense, a Domain of Interpretation (DOI) defines data for‐
mats, network traffic exchange types, and conventions for naming secu‐
rity-relevant information such as security policies or cryptographic
algorithms and modes. For ipsecalgs, the DOI defines naming and number‐
ing conventions for algorithms and the protocols they belong to. These
numbers are defined by the Internet Assigned Numbers Authority (IANA).
Each algorithm belongs to a protocol. Algorithm information includes
supported key lengths, block or MAC length, and the name of the crypto‐
graphic mechanism corresponding to that algorithm. This information is
used by the IPsec modules, ipsecesp(4P) and ipsecah(4P), to determine
the authentication and encryption algorithms that can be applied to
IPsec traffic.
The following protocols are predefined:
IPSEC_PROTO_ESP Defines the encryption algorithms (transforms) that
can be used by IPsec to provide data confidential‐
ity.
IPSEC_PROTO_AH Defines the authentication algorithms (transforms)
that can be used by IPsec to provide authentication.
The mechanism name specified by an algorithm entry must correspond to a
valid Solaris Cryptographic Framework mechanism. You can obtain the
list of available mechanisms by using the cryptoadm(8) command.
Applications can retrieve the supported algorithms and their associated
protocols by using the functions getipsecalgbyname(3C), getipsecal‐
gbynum(3C), getipsecprotobyname(3C) and getipsecprotobynum(3C).
Modifications to the protocols and algorithm by default update only the
contents of the /etc/inet/ipsecalgs configuration file. In order for
the new definitions to be used for IPsec processing, the changes must
be communicated to the kernel using the -s option. See NOTES for a de‐
scription of how the ipsecalgs configuration is synchronized with the
kernel at system restart.
When invoked without arguments, ipsecalgs displays the list of mappings
that are currently defined in /etc/inet/ipsecalgs. You can obtain the
corresponding kernel table of protocols and algorithms by using the -l
option.
OPTIONS
ipsecalgs supports the following options:
-a
Adds an algorithm of the protocol specified by the -P option. The
algorithm name(s) are specified with the -n option. The supported
key lengths and block sizes are specified with the -k, -i, and -b
options.
-b blocklen-list
Specifies the block or MAC lengths of an algorithm, in bytes. Set
more than one block length by separating the values with commas.
-e exec-mode
Designates the execution mode of cryptographic requests for the
specified protocol in the absence of cryptographic hardware
provider. See cryptoadm(8). exec-mode can be one of the following
values:
sync Cryptographic requests are processed synchronously in the
absence of a cryptographic hardware provider. This execu‐
tion mode leads to better latency when no cryptographic
hardware providers are available
async Cryptographic requests are always processed asynchronously
in the absence of cryptographic hardware provider. This
execution can improve the resource utilization on a multi-
CPU system, but can lead to higher latency when no crypto‐
graphic hardware providers are available.
This option can be specified when defining a new protocol or to
modify the execution mode of an existing protocol. By default, the
sync execution mode is used in the absence of a cryptographic hard‐
ware provider.
-f
Used with the -a option to force the addition of an algorithm or
protocol if an entry with the same name or number already exists.
-i inc
Specifies the valid key length increments in bits. This option must
be used when the valid key lengths for an algorithm are specified
by a range with the -k option.
-K default-keylen
Specifies the default key lengths for an algorithm, in bits. If the
-K option is not specified, the minimum key length will be deter‐
mined as follows:
o If the supported key lengths are specified by range, the
default key length will be the minimum key length.
o If the supported key lengths are specified by enumera‐
tion, the default key length will be the first listed
key length.
-k keylen-list
Specifies the supported key lengths for an algorithm, in bits. You
can designate the supported key lengths by enumeration or by range.
Without the -i option, -k specifies the supported key lengths by
enumeration. In this case, keylen-list consists of a list of one or
more key lengths separated by commas, for example:
128,192,256
The listed key lengths need not be increasing, and the first listed
key length will be used as the default key length for that algo‐
rithm unless the -K option is used.
With the -i option, -k specifies the range of supported key lengths
for the algorithm. The minimum and maximum key lengths must be sep‐
arated by a dash ('-') character, for example:
32-448
-l
Displays the kernel algorithm tables.
-m mech-name
Specifies the name of the cryptographic framework mechanism corre‐
sponding to the algorithm. Cryptographic framework mechanisms are
described in the cryptoadm(8) man page.
-N alg-number
Specifies an algorithm number. The algorithm number for a protocol
must be unique. IANA manages the algorithm numbers. See RFC 2407.
-n alg-names
Specifies one or more names for an algorithm. When adding an algo‐
rithm with the -a option, alg-names contains a string or a comma-
separated list of strings, for example:
aes-cbc,aes
When used with the -r option to remove an algorithm, alg-names con‐
tains one of the valid algorithm names.
-P protocol-number
Adds a protocol of the number specified by protocol-number with the
name specified by the -p option. This option is also used to spec‐
ify an IPsec protocol when used with the -a and the -R options.
Protocol numbers are managed by the IANA. See RFC 2407.
-p protocol-name
Specifies the name of the IPsec protocol.
-R
Removes an IPsec protocol from the algorithm table. The protocol
can be specified by number by using the -P option or by name by us‐
ing the -p option. The algorithms associated with the protocol are
removed as well.
-r
Removes the mapping for an algorithm. The algorithm can be speci‐
fied by algorithm number by using the -N option.
-s
Synchronizes the kernel with the contents of /etc/inet/ipsecalgs.
The contents of /etc/inet/ipsecalgs are always updated, but new in‐
formation is not passed on to the kernel unless the -s is used. See
NOTES for a description of how the ipsecalgs configuration is syn‐
chronized with the kernel at system restart.
The following options allow optional parameters to be configured. These
are currently only used for combined mode algorithms, that is, algo‐
rithms that provide encryption and authentication in a single opera‐
tion.
-I initialization-vector_length
The length of the Initialization Vector (IV) in bytes. The default
IV length is the same as the block length.
-M MAC-length
The length of the MAC or ICV in bytes for combined mode algorithms.
-S length-of-salt
The number of bytes of salt needed by the algorithm. The salt needs
to be provided by the key management mechanism.
-F flags
Algorithm flags. These influence the way in which the kernel han‐
dles security tasks, especially authentication, in the kernel. They
are also used by ipseckey(8) and ipsecconf(8). Flags can be speci‐
fied as a comma-separated list of tokens; see the example below.
The following tokens are supported:
COUNTERMODE
The algorithm uses counter mode.
COMBINED
The algorithm provides encryption and authentication in the
same operation.
CCM
The cryptographic framework mechanism needs a
crypto_ccm_params_t structure.
GMAC
The cryptographic framework mechanism needs a
crypto_gmac_params_t structure.
GCM
The cryptographic framework mechanism needs a
crypto_gcm_params_t structure.
CBC
This flag indicates the algorithm uses Cipher-block chaining.
The cryptographic framework mechanism does not need a params
structure. This is also the default, this flag can be omitted.
The algorithm flags can be displayed with the -l option.
EXAMPLES
Example 1 Adding a Protocol for IPsec Encryption
The following example shows how to add a protocol for IPsec encryption:
example# ipsecalgs -P 3 -p "IPSEC_PROTO_ESP"
Example 2 Adding the Blowfish Algorithm
For illustration purposes, the following theoretical example shows how
to add the unsupported Blowfish algorithm:
example# ipsecalgs -a -P 3 -k 32-488 -K 128 -i 8 -n "blowfish" \
-b 8 -N 7 -m CKM_BF_CBC
Example 3 Updating the Kernel Algorithm Table
The following example updates the kernel algorithm table with the cur‐
rently defined protocol and algorithm definitions:
example# svcadm refresh ipsecalgs
Example 4 Adding the AES Galois/Counter Mode (GCM) Algorithm
The following command adds this algorithm.
example# ipsecalgs -a -P3 -k 128-256 -K 128 -i 64 -N 20 -b 16 \
-n "aes-gcm16,aes-gcm" -m CKM_AES_GCM -M 16 -I 8 -S 4 \
-F GCM,COMBINED,COUNTER
FILES
/etc/inet/ipsecalgs
File that contains the configured IPsec protocols and algorithm de‐
finitions. Never edit this file manually.
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE TYPEAT‐
TRIBUTE VALUE _ Availabilitysystem/network _ Interface StabilityCommit‐
ted
SEE ALSO
getipsecalgbyname(3C), getipsecprotobyname(3C), ipsecah(4P),
ipsecesp(4P), ike.config(5), attributes(7), smf(7), cryptoadm(8),
ipsecconf(8), ipseckey(8), svcadm(8)
Piper, Derrell. RFC 2407, The Internet IP Security Domain of Interpre‐
tation for ISAKMP. Network Working Group. November 1998.
https://tools.ietf.org/html/rfc2407
NOTES
When protocols or algorithm definitions that are removed or altered,
services that rely upon these definitions can become unavailable. For
example, if the IPSEC_PROTO_ESP protocol is removed, then IPsec cannot
encrypt and decrypt packets.
Synchronization of the ipsecalgs configuration with the kernel at sys‐
tem startup is provided by the following smf(7) service:
svc:/network/ipsec/ipsecalgs:default
The IPsec services are delivered as follows:
svc:/network/ipsec/policy:default (enabled)
svc:/network/ipsec/ipsecalgs:default (enabled)
svc:/network/ipsec/manual-key:default (disabled)
svc:/network/ipsec/ike:default (disabled)
Services that are delivered disabled are delivered that way because the
system administrator must create configuration files for those services
before enabling them. See ipseckey(8) and ike.config(5). The default
policy for the policy service is to allow all traffic to pass without
IPsec protection. See ipsecconf(8).
The correct administrative procedure is to create the configuration
file for each service, then enable each service using svcadm(8), as
shown in the following example:
example# svcadm enable ipsecalgs
The service's status can be queried using the svcs(1) command.
If the ipsecalgs configuration is modified, the new configuration
should be resynchronized as follows:
example# svcadm refresh ipsecalgs
Administrative actions on this service, such as enabling, disabling,
refreshing, and requesting restart can be performed using svcadm(8). A
user who has been assigned the authorization shown below can perform
these actions:
solaris.smf.manage.ipsec
See auths(1), user_attr(5), rbac(7).
The ipsecalgs smf(7) service does not have any user-configurable prop‐
erties.
The smf(7) framework records any errors in the service-specific log
file. Use any of the following commands to examine the logfile prop‐
erty:
example# svcs -l ipsecalgs
example# svcprop ipsecalgs
example# svccfg -s ipsecalgs listprop
This command requires sys_ip_config privilege to operate and thus can
run in the global zone and in exclusive-IP zones. All shared-IP zones
share the same available set of algorithms; however, you can use ipsec‐
conf(8) to set up system policy that uses differing algorithms for var‐
ious shared-IP zones. All exclusive-IP zones have their own set of al‐
gorithms.
Oracle Solaris 11.4 21 Jun 2021 ipsecalgs(8)