svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
infocmp(8)
infocmp(8) System Administration Commands infocmp(8)
NAME
infocmp - compare or print out terminfo descriptions
SYNOPSIS
/usr/bin/infocmp [-d] [-c] [-n] [-I] [-L] [-C] [-r] [-u]
[-s | d | i | l | c] [-v] [-V] [-1] [-w width]
[-A directory] [-B directory] [termname]...
DESCRIPTION
infocmp compares a binary terminfo entry with other terminfo entries,
rewrites a terminfo description to take advantage of the use= terminfo
field, or prints out a terminfo description from the binary file (term)
in a variety of formats. It displays boolean fields first, then numeric
fields, followed by the string fields. If no options are specified, and
zero or one termname is specified, the -I option is assumed. If more
than one termname is specified, the -d option is assumed.
OPTIONS
The -d, -c, and -n options can be used for comparisons. infocmp com‐
pares the terminfo description of the first terminal termname with each
of the descriptions given by the entries for the other terminal's
termname. If a capability is defined for only one of the terminals, the
value returned will depend on the type of the capability: F for boolean
variables, −1 for integer variables, and NULL for string variables.
-d Produce a list of each capability that is different between two
entries. This option is useful to show the difference between two
entries, created by different people, for the same or similar
terminals.
-c Produce a list of each capability that is common between two en‐
tries. Capabilities that are not set are ignored. This option can
be used as a quick check to see if the -u option is worth using.
-n Produce a list of each capability that is in neither entry. If no
termname is given, the environment variable TERM will be used for
both of the termnames. This can be used as a quick check to see
if anything was left out of a description.
The -I, -L, and -C options will produce a source listing for each ter‐
minal named.
-I Use the terminfo names.
-L Use the long C variable name listed in <term.h>.
-C Use the termcap names. The source produced by the -C option may
be used directly as a termcap entry, but not all of the parame‐
terized strings may be changed to the termcap format. infocmp
will attempt to convert most of the parameterized information,
but anything not converted will be plainly marked in the output
and commented out. These should be edited by hand.
-r When using -C, put out all capabilities in termcap form.
If no termname is given, the environment variable TERM will be used for
the terminal name.
All padding information for strings will be collected together and
placed at the beginning of the string where termcap expects it. Manda‐
tory padding (padding information with a trailing '/') will become op‐
tional.
All termcap variables which are no longer supported by terminfo, but
are derivable from other terminfo variables, will be displayed. Not all
terminfo capabilities will be translated; only those variables which
were part of termcap will normally be displayed. Specifying the -r op‐
tion will take off this restriction, allowing all capabilities to be
displayed in termcap form.
Note that because padding is collected to the beginning of the capabil‐
ity, not all capabilities are displayed. Mandatory padding is not sup‐
ported. Because termcap strings are not as flexible, it is not always
possible to convert a terminfo string capability into an equivalent
termcap format. A subsequent conversion of the termcap file back into
terminfo format will not necessarily reproduce the original terminfo
source.
Some common terminfo parameter sequences, their termcap equivalents,
and some terminal types which commonly have such sequences, are:
tab() box; cw(2.75i) |cw(0.69i) |cw(2.06i) lw(2.75i) |lw(0.69i)
|lw(2.06i) terminfotermcapRepresentative Terminals _ %p1%c%.adm _
%p1%d%dhp, ANSI standard, vt100 _ %p1%'x'%+%c%+xconcept _ %i%iANSI
standard, vt100 _ %p1%?%'x'%>%t%p1%'y'%+%;%>xyconcept _ %p2 is printed
before %p1%rhp
-u Produce a terminfo source description of the first terminal
termname which is relative to the sum of the descriptions given
by the entries for the other terminals' termnames. It does this
by analyzing the differences between the first termname and the
other termnames and producing a description with use= fields for
the other terminals. In this manner, it is possible to retrofit
generic terminfo entries into a terminal's description. Or, if
two similar terminals exist, but were coded at different times,
or by different people so that each description is a full de‐
scription, using infocmp will show what can be done to change one
description to be relative to the other.
A capability is displayed with an at-sign (@) if it no longer exists in
the first termname, but one of the other termname entries contains a
value for it. A capability's value is displayed if the value in the
first termname is not found in any of the other termname entries, or if
the first of the other termname entries that has this capability gives
a different value for that capability.
The order of the other termname entries is significant. Since the ter‐
minfo compiler tic does a left-to-right scan of the capabilities, spec‐
ifying two use= entries that contain differing entries for the same ca‐
pabilities will produce different results, depending on the order in
which the entries are given. infocmp will flag any such inconsistencies
between the other termname entries as they are found.
Alternatively, specifying a capability after a use= entry that con‐
tains, it will cause the second specification to be ignored. Using in‐
focmp to re-create a description can be a useful check to make sure
that everything was specified correctly in the original source descrip‐
tion.
Another error that does not cause incorrect compiled files, but will
slow down the compilation time, is specifying superfluous use= fields.
infocmp will flag any superfluous use= fields.
-s Sorts the fields within each type according to the argument
below:
d Leave fields in the order that they are stored in the
terminfo database.
i Sort by terminfo name.
l Sort by the long C variable name.
c Sort by the termcap name.
If the -s option is not given, the fields are sorted alpha‐
betically by the terminfo name within each type, except in
the case of the -C or the -L options, which cause the sort‐
ing to be done by the termcap name or the long C variable
name, respectively.
-v Print out tracing information on standard error as the pro‐
gram runs.
-V Print out the version of the program in use on standard er‐
ror and exit.
−1 Print the fields one to a line. Otherwise, the fields are
printed several to a line to a maximum width of 60 charac‐
ters.
-wwidth Changes the output to width characters.
The location of the compiled terminfo database is taken from the envi‐
ronment variable TERMINFO. If the variable is not defined, or the ter‐
minal is not found in that location, the system terminfo database, usu‐
ally in /usr/share/lib/terminfo, is used. The options -A and -B may be
used to override this location.
-A directory Set TERMINFO for the first termname.
-B directory Set TERMINFO for the other termnames. With this, it is
possible to compare descriptions for a terminal with
the same name located in two different databases. This
is useful for comparing descriptions for the same ter‐
minal created by different people.
FILES
/usr/share/lib/terminfo/?/*
Compiled terminal description database.
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE TYPEAT‐
TRIBUTE VALUE _ Availabilitysystem/core-os
SEE ALSO
curses(3CURSES), terminfo(5), attributes(7), captoinfo(8), tic(8)
Oracle Solaris 11.4 23 Jun 2025 infocmp(8)