개요

• 솔라나라에 설명된 어플리케이션에 대해 맨 페이지를 찾아 출력한다.
• MAN 페이지에 대한 설명은 윈디하나의 솔라나라: MAN 페이지을 참고하자.
• svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.

hme(4)

HME(4)                   BSD Kernel Interfaces Manual                   HME(4)

NAME
     hme — Sun Microelectronics STP2002-STQ Ethernet interfaces device driver

SYNOPSIS
     To compile this driver into the kernel, place the following lines in your
     kernel configuration file:

           device miibus
           device hme

     Alternatively, to load the driver as a module at boot time, place the
     following line in loader.conf(5):

           if_hme_load="YES"

DESCRIPTION
     The hme driver supports Sun Microelectronics STP2002-STQ “Happy Meal
     Ethernet” Fast Ethernet interfaces.

     All controllers supported by the hme driver have TCP checksum offload
     capability for both receive and transmit, support for the reception and
     transmission of extended frames for vlan(4) and a 128-bit multicast hash
     filter.

HARDWARE
     The hme driver supports the on-board Ethernet interfaces of many Sun
     UltraSPARC workstation and server models.

     Cards supported by the hme driver include:

     ·   Sun PCI SunSwift Adapter (“SUNW,hme”)
     ·   Sun SBus SunSwift Adapter (“hme” and “SUNW,hme”)
     ·   Sun PCI Sun100BaseT Adapter 2.0 (“SUNW,hme”)
     ·   Sun SBus Sun100BaseT 2.0 (“SUNW,hme”)
     ·   Sun PCI Quad FastEthernet Controller (“SUNW,qfe”)
     ·   Sun SBus Quad FastEthernet Controller (“SUNW,qfe”)

NOTES
     On sparc64 the hme driver respects the local-mac-address? system configu‐
     ration variable which can be set in the Open Firmware boot monitor using
     the setenv command or by eeprom(8).  If set to “false” (the default), the
     hme driver will use the system's default MAC address for all of its
     devices.  If set to “true”, the unique MAC address of each interface is
     used if present rather than the system's default MAC address.

     Supported interfaces having their own MAC address include on-board ver‐
     sions on boards equipped with more than one Ethernet interface and all
     add-on cards except the single-port SBus versions.

SEE ALSO
     altq(4), intro(4), miibus(4), netintro(4), vlan(4), eeprom(8),
     ifconfig(8)

     Sun Microelectronics, STP2002QFP Fast Ethernet, Parallel Port, SCSI
     (FEPS) User's Guide,
     http://mediacast.sun.com/users/Barton808/media/STP2002QFP-FEPs_UG.pdf,
     April 1996.

HISTORY
     The hme driver first appeared in NetBSD 1.5.  The first FreeBSD version
     to include it was FreeBSD 5.0.

AUTHORS
     The hme driver was written by Paul Kranenburg <pk@NetBSD.org>.

BSD                              June 14, 2009                             BSD