svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
gss_acquire_cred(3gss)
Generic Security Services API Library Functions gss_acquire_cred(3gss)
NAME
gss_acquire_cred - acquire a handle for a pre-existing credential by
name
SYNOPSIS
cc [ flag... ] file... -lgss [ library... ]
#include <gssapi/gssapi.h>
OM_uint32 gss_acquire_cred(OM_uint32 *minor_status,
const gss_name_t desired_name, OM_uint32 time_req,
const gss_OID_set desired_mech, gss_cred_usage_t cred_usage,
gss_cred_id_t *output_cred_handle, gss_OID_set *actual_mechs,
OM_uint32 *time_rec);
DESCRIPTION
The gss_acquire_cred() function allows an application to acquire a han‐
dle for a pre-existing credential by name. This routine is not intended
as a function to login to the network; a function for login to the net‐
work would involve creating new credentials rather than merely acquir‐
ing a handle to existing credentials.
If desired_name is GSS_C_NO_NAME, the call is interpreted as a request
for a credential handle that will invoke default behavior when passed
to gss_init_sec_context(3GSS) (if cred_usage is GSS_C_INITIATE or
GSS_C_BOTH) or gss_accept_sec_context(3GSS) (if cred_usage is
GSS_C_ACCEPT or GSS_C_BOTH).
Normally gss_acquire_cred() returns a credential that is valid only for
the mechanisms requested by the desired_mechs argument. However, if
multiple mechanisms can share a single credential element, the function
returns all the mechanisms for which the credential is valid in the
actual_mechs argument.
gss_acquire_cred() is intended to be used primarily by context accep‐
tors, since the GSS-API routines obtain initiator credentials through
the system login process. Accordingly, you may not acquire GSS_C_INITI‐
ATE or GSS_C_BOTH credentials by means of gss_acquire_cred() for any
name other than GSS_C_NO_NAME. Alternatively, you may acquire
GSS_C_INITIATE or GSS_C_BOTH credentials for a name produced when
gss_inquire_cred(3GSS) is applied to a valid credential, or when
gss_inquire_context(3GSS) is applied to an active context.
If credential acquisition is time-consuming for a mechanism, the mecha‐
nism may choose to delay the actual acquisition until the credential is
required, for example, by gss_init_sec_context(3GSS) or by
gss_accept_sec_context(3GSS). Such mechanism-specific implementations
are, however, invisible to the calling application; thus a call of
gss_inquire_cred(3GSS) immediately following the call of
gss_acquire_cred() will return valid credential data and incur the
overhead of a deferred credential acquisition.
PARAMETERS
The parameter descriptions for gss_acquire_cred() follow:
desired_name The name of the principal for which a credential
should be acquired.
time_req The number of seconds that credentials remain
valid. Specify GSS_C_INDEFINITE to request that
the credentials have the maximum permitted life‐
time
desired_mechs The set of underlying security mechanisms that
may be used. GSS_C_NO_OID_SET may be used to
obtain a default.
cred_usage A flag that indicates how this credential should
be used. If the flag is GSS_C_ACCEPT, then cre‐
dentials will be used only to accept security
credentials. GSS_C_INITIATE indicates that cre‐
dentials will be used only to initiate security
credentials. If the flag is GSS_C_BOTH, then cre‐
dentials may be used either to initiate or accept
security contexts.
output_cred_handle The returned credential handle. Resources asso‐
ciated with this credential handle must be
released by the application after use with a call
to gss_release_cred(3GSS)
actual_mechs The set of mechanisms for which the credential is
valid. Storage associated with the returned OID-
set must be released by the application after use
with a call to gss_release_oid_set(3GSS). Spec‐
ify NULL if not required.
time_rec Actual number of seconds for which the returned
credentials will remain valid. Specify NULL if
not required.
minor_status Mechanism specific status code.
ERRORS
gss_acquire_cred() may return the following status code:
GSS_S_COMPLETE Successful completion.
GSS_S_BAD_MECH An unavailable mechanism has been
requested.
GSS_S_BAD_NAMETYPE The type contained within the desired_name
parameter is not supported.
GSS_S_BAD_NAME The value supplied for desired_name param‐
eter is ill formed.
GSS_S_CREDENTIALS_EXPIRED The credentials could not be acquired
because they have expired.
GSS_S_NO_CRED No credentials were found for the speci‐
fied name.
GSS_S_FAILURE The underlying mechanism detected an error
for which no specific GSS status code is
defined. The mechanism-specific status
code reported by means of the minor_status
parameter details the error condition.
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE
TYPEATTRIBUTE VALUE _ MT-LevelSafe
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
box; cbp-1 | cbp-1 l | l . ATTRIBUTE TYPE ATTRIBUTE VALUE = Availabil‐
ity security/kerberos-5 = Stability Pass-through committed
SEE ALSO
gss_accept_sec_context(3GSS), gss_init_sec_context(3GSS),
gss_inquire_context(3GSS), gss_inquire_cred(3GSS),
gss_release_cred(3GSS), gss_release_oid_set(3GSS), attributes(7)
NOTES
Source code for open source software components in Oracle Solaris can
be found at https://www.oracle.com/downloads/opensource/solaris-source-
code-downloads.html.
This software was built from source available at
https://github.com/oracle/solaris-userland. The original community
source was downloaded from http://web.mit.edu/ker‐
beros/dist/krb5/1.18/krb5-1.18.4.tar.gz.
Further information about this software can be found on the open source
community website at http://web.mit.edu/kerberos/.
Solaris 11.4 22 Aug 2011 gss_acquire_cred(3gss)