svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
groff_hdtbl(7)
groff_hdtbl(7) Miscellaneous Information Manual groff_hdtbl(7)
Name
groff_hdtbl - Heidelberger table macros for GNU roff
Description
The hdtbl macros consist of four base and three optional macros, con‐
trolled by about twenty arguments. The syntax is simple and similar to
the HTML table model and nearly as flexible: you can write sequences of
tokens (macro calls with their arguments and content data), separated
by blanks and beginning with a macro call, into the same line to get
compact and cleanly arrranged input. An advantage of hdtbl is that the
tables are constructed without calling a preprocessor; this means that
groff(7)'s full macro capabilities are available. On the other hand,
table processing with hdtbl is much slower than using the gtbl(1) pre‐
processor. A further advantage is that the HTML-like syntax of hdtbl
will be easily converted to HTML; this is not implemented yet.
Usage
In this and the next section, we present examples to help users under‐
stand the basic workflow of hdtbl. First of all, you must load the
hdtbl.tmac file. As with nearly all other groff macro packages, there
are two possibilities to do so: Either add the line
.mso hdtbl.tmac
to your roff file before using any macros of the hdtbl package, or add
the option
-m hdtbl
to the command line of groff (before the document file which contains
hdtbl macros). Then you can include on or more tables in your docu‐
ment, where each one must be started and ended with the .TBL and .ETB
macros, respectively.
In this man page, we approximate the result of each example as terminal
output to be as generic as possible since hdtbl currently only supports
the ps and pdf output drivers.
The simplest well-formed table consists of just single calls to the
four base table macros in the right order. Here we construct a table
with only one cell.
.TBL
.TR
.TD
contents of the table cell
.ETB
A terminal representation is
+------------------------------------------------------+
| contents-of-the-table-cell |
+------------------------------------------------------+
Equivalent to the above is the following notation.
.TBL .TR .TD "contents of the table cell" .ETB
By default, the formatted table is inserted into the surrounding text
at the place of its definition. If the vertical space isn't suffi‐
cient, it is placed at the top of the next page. Tables can also be
stored for later insertion.
Using ‘row-number*column-number’ as the data for the table cells, a ta‐
ble with two rows and two columns can be written as
.TBL cols=2
. TR .TD 1*1 .TD 1*2
. TR .TD 2*1 .TD 2*2
.ETB
A terminal representation is
+--------------------------+---------------------------+
| 1*1 | 1*2 |
+--------------------------+---------------------------+
| 2*1 | 2*2 |
+--------------------------+---------------------------+
Here we see a difference from HTML tables: The number of columns must
be explicitly specified using the ‘cols=m’ argument (or indirectly via
the ‘width’ argument, see below).
The contents of a table cell is arbitrary; for example, it can be an‐
other table, without restriction to the nesting depth. A given table
layout can be either constructed with suitably nested tables or with
proper arguments to .TD and .TH, controlling column and row spanning.
Note, however, that this table
.TBL
. TR
. TD
. nop 1*1 1*2
. TR
. TD
. TBL cols=2 border=
. TR
. TD
. nop 2*1
. TD
. nop 2*2
. ETB
.ETB
and this table
.TBL cols=2
. TR
. TD colspan=2
. nop 1*1 1*2
. TR
. TD
. nop 2*1
. TD
. nop 2*2
.ETB
are similar but not identical (the use of .nop is purely cosmetic to
get proper indentation).
The first table looks like
+------------------------------------------------------+
| 1*1 1*2 |
+------------------------------------------------------+
| |
| 2*1 2*2 |
| |
+------------------------------------------------------+
and the second one like
+------------------------------------------------------+
| 1*1 1*2 |
+---------------------------+--------------------------+
| 2*1 | 2*2 |
+---------------------------+--------------------------+
Here is the latter table in a more compact form.
.TBL cols=2 .TR ".TD colspan=2" 1*1 1*2
. TR .TD 2*1 .TD 2*2 .ETB
If a macro has one or more arguments (see below), and it is not start‐
ing a line, everything belonging to this macro including the macro it‐
self must be enclosed in double quotes.
Macros and arguments
The order of macro calls and other tokens follows the HTML model. In
the following list, valid predecessors and successors of all hdtbl
macros are given, together with the possible arguments.
Macro arguments are separated by blanks. The order of arguments is ar‐
bitrary; they are of the form
key=value
or
key='value1 [value2 [...]]'
with the only exception of the optional argument of the macro .ETB,
which is the string ‘hold’. Another possible form is
"key=value1 [value2 [...]]"
However, this is limited to the case where the macro is the first one
in the line and not already enclosed in double quotes.
Argument values specified below as c are colors predefined by groff or
colors defined by the user with the .defcolor request. Argument val‐
ues d are decimal numbers with or without decimal point. Argument val‐
ues m are natural numbers. Argument values n are numerical values with
the usual groff scaling indicators. Some of the arguments are specific
to one or two macros, but most of them can be specified with .TBL, .TR,
.TD, and .TH. These common arguments are explained in the next subsec‐
tion.
Most of the argument default values can be changed by the user by set‐
ting corresponding default registers or strings, as listed below.
.TBL [args]
Begin a new table.
predecessor: .TD, .TH, .ETB, cell contents
successor: .CPTN, .TR
arguments:
border=[n]
Thickness of the surrounding box border.
‘border=’ (no value) means neither a surrounding
box border nor any horizontal or vertical separa‐
tor lines between the table rows and cells.
‘border=0’ suppresses the surrounding box border,
but still allows separator lines between cells and
rows.
Default: ‘border=.1n’ (register ‘t*b’).
bc=c Border color.
Default: ‘bc=red4’ (string ‘t*bc’).
cols=m Number of table columns. This argument is neces‐
sary if more than one column is in the table and
no ‘width’ arguments are present.
Default: ‘cols=1’ (register ‘t*cols’).
cpd=n Cell padding, i.e., the extra space between the
cell space border and the cell contents.
Default: ‘cpd=.5n’ (register ‘t*cpd’).
csp=n Cell spacing, i.e., the extra space between the
table border or vertical or horizontal lines be‐
tween cells and the cellspace.
Default: ‘csp=.5n’ (register ‘t*csp’).
tal=l|c|r
Horizontal alignment of the table, if it is
smaller than the line width. ‘tal=l’: left align‐
ment. ‘tal=c’: centered alignment. ‘tal=r’:
right alignment.
Default: ‘tal=l’ (register ‘t*tal’).
width='w1 [w2 [...]]'
Widths of table cells. w1, w2, ... are either
numbers of type n or natural numbers with the
pseudo-scaling indicator ‘%’, with the meaning
“percent of the actual line length (or column
length for inner tables, respectively)”. If there
are less width values than table columns, the last
width value is used for the remaining cells. The
argument
width='1.5i 10%'
for example indicates that the first column is
1.5 inches wide; the remaining columns take 1/10
of the column length each.
Default: The table width equals the outer line
length or column length; the columns have equal
widths.
height=n
Height of the table. If the table with its con‐
tents is lower than n, the last row is stretched
to this value.
.CPTN [args]
Text of caption.
The (optionally numbered) table caption. .CPTN is optional.
predecessor: .TBL
successor: .TR
arguments:
val=t|b
Vertical alignment of the table caption. ‘val=t’:
The caption is placed above the table. ‘val=b’:
The caption is placed below the table.
Default: ‘val=t’ (string ‘t*cptn’).
.TR [args]
Begin a new table row.
predecessor: .TBL, .CPTN, .TD, .TH, .ETB, cell contents
successor: .TD, .TH
arguments:
height=n
The height of the row. If a cell in the row is
higher than n, this value is ignored; otherwise
the row height is stretched to n.
.TD [args [cell contents]]
Begin a table data cell.
.TH [args [cell contents]]
Begin a table header cell.
Arguments and cell contents can be mixed. The macro .TH is not
really necessary and differs from .TD only in three default set‐
tings, similar to the <TH> and <TD> HTML tags: The contents of
.TH is horizontally and vertically centered and typeset in bold‐
face.
predecessor: .TR, .TD, .TH, .ETB, cell contents
successor: .TD, .TH, .TR, .ETB, cell contents
arguments:
colspan=m
The width of this cell is the sum of the widths of
the m cells above and below this row.
rowspan=m
The height of this cell is the sum of the heights
of the m cells left and right of this column.
Remark: Overlapping of column and row spanning, as
in the following table fragment (the overlapping
happens in the second cell in the second row), is
invalid and causes incorrect results.
.TR .TD 1*1 ".TD 1*2 rowspan=2" .TD 1*3
.TR ".TD 2*1 colspan=2" .TD 2*3
A working example for headers and cells with colspan is
.TBL cols=3
. TR ".TH colspan=2" header1+2 .TH header3
. TR .TD 1*1 .TD 1*2 .TD 1*3
. TR .TD 2*1 ".TD colspan=2" 2*2+3
.ETB
This looks like
+------------------------------+---------------+
| header1+2 | header3 |
+--------------+---------------+---------------+
| 1*1 | 1*2 | 1*3 |
+--------------+---------------+---------------+
| 2*1 | 2*2+3 |
+--------------+-------------------------------+
A working example with rowspan is
.TBL cols=3
. TR
. TD 1*1
. TD rowspan=2 1+2*2
. TD 1*3
.
. TR
. TD 2*1
. TD 2*3
.ETB
which looks like
+--------------+---------------+---------------+
| 1*1 | 1+2*2 | 1*3 |
+--------------+ +---------------+
| 2*1 | | 2*3 |
+--------------+---------------+---------------+
.ETB [hold]
End of the table.
This macro finishes a table. It causes one of the following ac‐
tions.
• If the argument ‘hold’ is given, the table is held until it
is freed by calling the macro .t*free, which in turn prints
the table immediately, either at the current position or at
the top of the next page if its height is larger than the re‐
maining space on the page.
• Otherwise, if the table is higher than the remaining space on
the page, it is printed at the top of the next page.
• If neither of the two above constraints hold, the table is
printed immediately at the place of its definition.
predecessor: .TD, .TH, .ETB, cell contents
successor: .TBL, .TR, .TD, .TH, .ETB, cell contents
arguments:
hold Prevent the table from being printed until it is
freed by calling the macro .t*free. This argument
is ignored for inner (nested) tables.
.t*free [n]
Free the next held table or n held tables. Call this utility
macro to print tables which are held by using the ‘hold’ argu‐
ment of the .ETB macro.
Arguments common to .TBL, .TR, .TD, and .TH
The arguments described in this section can be specified with the .TBL
and .TR macros, but they are eventually passed on to the table cells.
If omitted, the defaults take place, which the user can change by set‐
ting the corresponding default registers or strings, as documented be‐
low. Setting an argument with the .TBL macro has the same effect as
setting it for all rows in the table. Setting an argument with a .TR
macro has the same effect as setting it for all the .TH or .TD macro in
this row.
bgc=[c]
The background color of the table cells. This includes the area
specified with the ‘csp’ argument. The argument ‘bgc=’ (no
value) suppresses a background color; this makes the background
transparent.
Default: ‘bgc=bisque’ (string ‘t*bgc’).
fgc=c The foreground color of the cell contents.
Default: ‘fgc=red4’ (string ‘t*fgc’).
ff=name
The font family for the table. name is a groff font family
identifier, such as A for Avant Garde or HN for Helvetica Nar‐
row.
Default: The font family found before the table (string ‘t*ff’).
fst=style
The font style for the table. One of R, B, I, or BI for roman,
bold, italic, or bold italic, respectively. As with roff's .ft
request, the ‘fst’ argument can be used to specify the font fam‐
ily and font style together, for example ‘fst=HNBI’ instead of
‘ff=HN’ and ‘fst=BI’.
Default: The font style in use right before the table (string
‘t*fst’).
fsz='d1 [d2]'
A decimal or fractional factor d1, by which the point size for
the table is changed, and d2, by which the vertical line spacing
is changed. If d2 is omitted, value d1 is taken for both.
Default: ‘fsz='1.0 1.0'’ (string ‘t*fsz’).
hal=l|c|b|r
Horizontal alignment of the cell contents in the table.
‘hal=l’: left alignment. ‘hal=c’: centered alignment. ‘hal=b’:
both (left and right) alignment. ‘hal=r’: right alignment.
Default: ‘hal=b’ (string ‘t*hal’).
val=t|m|b
Vertical alignment of the cell contents in the table for cells
lower than the current row. ‘val=t’: alignment below the top of
the cell. ‘val=m’: alignment in the middle of the cell.
‘val=b’: alignment above the cell bottom.
Default: ‘val=t’ (string ‘t*val’).
hl=[s|d]
Horizontal line between the rows. If specified with .TD or .TH
this is a separator line to the cell below. ‘hl=’ (no value):
no separator line. ‘hl=s’: a single separator line between the
rows. ‘hl=d’: a double separator line.
The thickness of the separator lines is the half of the border
thickness, but at least 0.1 inches. The distance between the
double lines is equal to the line thickness.
Remark: Together with ‘border=0’ for proper formatting the value
of ‘csp’ must be at least .05 inches for single separator lines
and .15 inches for double separator lines.
Default: ‘hl=s’ (string ‘t*hl’).
vl=[s|d]
Vertical separator line between the cells. If specified with
.TD or .TH this is a separator line to the cell on the right.
‘vl=s’: a single separator line between the cells. ‘vl=d’: a
double separator line. ‘vl=’ (no value): no vertical cell sepa‐
rator lines. For more information see the documentation of the
‘hl’ argument above.
Default: ‘vl=s’ (string ‘t*vl’).
hdtbl customization
Before creating the first table, you should configure default values to
minimize the markup needed in each table. The following example sets
up defaults suitable for typical papers:
.ds t*bgc white\" background color
.ds t*fgc black\" foreground color
.ds t*bc black\" border color
.nr t*cpd 0.1n\" cell padding
The file /usr/share/doc/groff-1.23.0/examples/hdtbl/common.roff pro‐
vides another example setup in the “minimal Page setup” section.
A table which does not fit on a partially filled page is printed auto‐
matically on the top of the next page if you append the little utility
macro t*hm to the page header macro of your document's main macro pack‐
age. For example, say
.am pg@top
. t*hm
..
if you use the ms macro package.
The macro t*EM checks for held or kept tables, and for missing ETB
macros (table not closed). You can call this macro by appending it the
to end-of-input macro of the main, or “full-service”, macro package
your document uses. For example, try
.am pg@end-text
. t*EM
..
if you use the ms package.
Bugs and suggestions
Please send your comments to the groff mailing list ⟨groff@gnu.org⟩ or
directly to the author.
Authors
The hdtbl macro package was written by Joachim Walsdorff ⟨Joachim
.Walsdorff@urz.uni-heidelberg.de⟩.
See also
groff(1)
provides an overview of GNU roff and details how to invoke groff
at the command line.
groff(7)
summarizes the roff language and GNU extensions to it.
gtbl(1)
describes the traditional roff preprocessor for tables.
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
box; cbp-1 | cbp-1 l | l . ATTRIBUTE TYPE ATTRIBUTE VALUE = Availabil‐
ity text/groff = Stability Uncommitted
NOTES
Source code for open source software components in Oracle Solaris can
be found at https://www.oracle.com/downloads/opensource/solaris-source-
code-downloads.html.
This software was built from source available at:
https://github.com/oracle/solaris-userland
The original community source was downloaded from:
https://ftp.gnu.org/gnu/groff/groff-1.23.0.tar.gz
Further information about this software can be found on the open source
community website at https://www.gnu.org/software/groff.
groff 1.23.0 1 December 2025 groff_hdtbl(7)