svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
getent(8)
getent(8) System Administration Commands getent(8)
NAME
getent - get entries from administrative database
SYNOPSIS
getent database [key]...
DESCRIPTION
getent gets a list of entries from the administrative database speci‐
fied by database. The information generally comes from one or more of
the sources that are specified for the database in nsswitch.conf(5).
database is the name of the database to be examined. This value can be
passwd, group, hosts, ipnodes, services, protocols, ethers, networks,
netmasks, project, user_attr, prof_attr, auth_attr, exec_attr, auto‐
mount, netgroup, initgroups, rpc, or shadow. For each of these data‐
bases, getent uses the appropriate library routines as described below.
Many of the databases support enumeration if no key is specified on the
command line. Not all databases have documented libc(3LIB) interfaces.
Man page references are supplied for each database that has supported
and documented interfaces.
Supported databases:
passwd Supported interfaces are documented in getpwnam(3C).
group Supported interfaces are documented in getgrnam(3C).
hosts Supported interfaces are documented in gethostbyname(3C).
The DNS repository does not enumerate the hosts database.
ipnodes Supported interfaces are documented in getipnodeby‐
name(3C). The DNS repository does not enumerate the ipn‐
odes database.
services Supported interfaces are documented in getservbyname(3C).
protocols Supported interfaces are documented in getprotoby‐
name(3C).
ethers Supported interfaces are documented in ethers(3C). This
database does not support enumeration.
networks Supported interfaces are documented in getnetbyname(3C).
netmasks There are no public interfaces for this database. This
database does not support enumeration.
project Supported interfaces are documented in getprojby‐
name(3PROJECT).
user_attr Supported interfaces are documented in getuserattr(3C).
prof_attr Supported interfaces are documented in getprofattr(3C).
auth_attr Supported interfaces are documented in getauthattr(3C).
exec_attr Supported interfaces are documented in getexecattr(3C).
netgroup Supported interfaces are documented in getnetgrent(3C).
This database does not support enumeration.
initgroups Supported interfaces are documented in getgrouplist(3C).
rpc Supported interfaces are documented in getrpcbyname(3C).
shadow Supported interfaces are documented in getspnam(3C).
The getent command can also be used to fetch entries from automount
maps, by specifying the following value for database:
automount/map
In this case, getent retrieves the contents of map from the sources
listed for automount in nsswitch.conf(5). As with other databases, one
or more specific search keys can be passed.
Each key must be in a format appropriate for searching on the respec‐
tive database. For example, it can be a username or numeric-uid for
passwd; hostname or IP-address for hosts; or service, service/protocol,
port, or port/proto for services.
getent prints each entry from the specified database that matches each
specified key, one per line, in the format of the matching administra‐
tive file: passwd(5), group(5), project(5), networks(5), netmasks(5),
user_attr(5), prof_attr(5), auth_attr(5), or exec_attr(5), or an auto‐
mount map file as described in automount(8). The key for exec_attr(5)
is a profile name. If no key is given, all entries returned by the cor‐
responding enumeration library routine (such as getpwent() or gethos‐
tent()) are printed. Enumeration is not supported on ipnodes, ethers,
netgroup, or netmasks.
For netgroup, either specify the netgroup name or specify the netgroup
name plus the triples (hostname, username, and domainname) specified as
keys. The getent command displays each triple that matches the netgroup
name or each triple that matches the specified netgroup name and
triple. The asterisk (*) can be used as a wildcard in triples. Note
that you might need to escape asterisks.
Key Interpretation for passwd, group, and user_attr Databases
When getent is invoked with database set to passwd, each key value is
processed as follows:
o If the key value consists only of numeric characters, getent
assumes that the key value is a numeric user ID and searches
the user database for a matching user ID.
o If the user ID is not found in the user database or if the
key value contains any non-numeric characters, getent as‐
sumes the key value is a user name and searches the user
database for a matching user name.
Similarly, when getent is invoked with database set to group, each key
value is processed as follows:
o If the key value consists only of numeric characters, getent
assumes that the key value is a numeric group ID and
searches the group database for a matching group ID.
o If the group ID is not found in the group database or if the
key value contains any non-numeric characters, getent as‐
sumes the key value is a group name and searches the group
database for a matching group name.
When getent is invoked with database set to user_attr, each key value
is processed as follows:
o If the key value consists only of numeric characters, getent
assumes that the key value is a numeric user ID and searches
the user database for a matching user ID.
o If the key value contains any non-numeric characters, getent
assumes the key value is a user name and searches the user
database for a matching user name.
EXAMPLES
Example 1 Listing the Contents of a Database
The following example lists the entire contents of the protocols data‐
base.
$ getent protocols
Example 2 Listing the Contents of an Automount Map
The following example lists the entire contents of the auto_master au‐
tomount map.
$ getent automount/auto_master
Example 3 Displaying the Entries for a User in the auto_home Automount
Map
The following example displays the entry for user username in the
auto_home automount map.
$ getent automount/auto_home username
Example 4 Displaying netgroup Triples
The following example output displays triples that match the specified
netgroup name (workstations) and triple. Wildcards (*) can be specified
in the triple.
A match is shown as the netgroup triple equal to 1.
$ getent netgroup workstations hostname fR
workstations (hostname,*,*) = 1
EXIT STATUS
The following exit values are returned:
0 Successful completion.
1 Command syntax was incorrect, an invalid option was used, or an
internal error occurred.
2 At least one of the specified entry names was not found in the
database.
3 There is no support for enumeration on this database.
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE TYPEAT‐
TRIBUTE VALUE _ Availabilitysystem/core-os _ Interface StabilityCommit‐
ted
SEE ALSO
ethers(3C), getauthattr(3C), getexecattr(3C), getgrnam(3C),
getgrouplist(3C), gethostbyaddr(3C), gethostbyname(3C), gethostent(3C),
getipnodebyaddr(3C), getipnodebyname(3C), getnetbyname(3C),
getnetgrent(3C), getprofattr(3C), getprotobyname(3C), getpwnam(3C),
getservbyname(3C), getspnam(3C), getuserattr(3C),
getprojbyname(3PROJECT), getrpcbyname(3C), auth_attr(5), ethers(5),
exec_attr(5), group(5), hosts(5), netgroup(5), netmasks(5),
networks(5), nsswitch.conf(5), passwd(5), prof_attr(5), project(5),
protocols(5), rpc(5), services(5), shadow(5), user_attr(5),
automount(8)
Oracle Solaris 11.4 6 Oct 2022 getent(8)