svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
devmap_load(9f)
devmap_unload(9F) Kernel Functions devmap_unload(9F)
NAME
devmap_unload, devmap_load - control validation of memory address
translations
SYNOPSIS
#include <sys/ddi.h>
#include <sys/sunddi.h>
int devmap_load(devmap_cookie_t dhp, offset_t off, size_t len,
uint_t type, uint_t rw);
int devmap_unload(devmap_cookie_t dhp, offset_t off, size_t len);
INTERFACE LEVEL
Solaris DDI specific (Solaris DDI).
PARAMETERS
dhp An opaque mapping handle that the system uses to describe the
mapping.
off User offset within the logical device memory at which the load‐
ing or unloading of the address translations begins.
len Length (in bytes) of the range being affected.
devmap_load() only
type Type of access operation.
rw Direction of access.
DESCRIPTION
devmap_unload() and devmap_load() are used to control the validation of
the memory mapping described by dhp in the specified range. devmap_un‐
load() invalidates the mapping translations and will generate calls to
the devmap_access(9E) entry point next time the mapping is accessed.
The drivers use devmap_load() to validate the mapping translations dur‐
ing memory access.
A typical use of devmap_unload() and devmap_load() is in the driver's
context management callback function, devmap_contextmgt(9E). To manage
a device context, a device driver calls devmap_unload() on the context
about to be switched out. It switches contexts, and then calls de‐
vmap_load() on the context switched in. devmap_unload() can be used to
unload the mappings of other processes as well as the mappings of the
calling process, but devmap_load() can only be used to load the map‐
pings of the calling process. Attempting to load another process's map‐
pings with devmap_load() will result in a system panic.
For both routines, the range to be affected is defined by the off and
len arguments. Requests affect the entire page containing the off and
all pages up to and including the page containing the last byte as in‐
dicated by off + len. The arguments type and rw are provided by the
system to the calling function (for example, devmap_contextmgt(9E)) and
should not be modified.
Supplying a value of 0 for the len argument affects all addresses from
the off to the end of the mapping. Supplying a value of 0 for the off
argument and a value of 0 for len argument affect all addresses in the
mapping.
A non-zero return value from either devmap_unload() or devmap_load()
will cause the corresponding operation to fail. The failure may result
in a SIGSEGV or SIGBUS signal being delivered to the process.
RETURN VALUES
0 Successful completion.
Non-zero An error occurred.
CONTEXT
These routines can be called from user or kernel context only.
EXAMPLES
Example 1 Managing a One-Page Device Context
The following shows an example of managing a device context that is one
page in length.
struct xx_context cur_ctx;
static int
xxdevmap_contextmgt(devmap_cookie_t dhp, void *pvtp, offset_t off,
size_t len, uint_t type, uint_t rw)
{
int err;
devmap_cookie_t cur_dhp;
struct xx_pvt *p;
struct xx_pvt *pvp = (struct xx_pvt *)pvtp;
/* enable access callbacks for the current mapping */
if (cur_ctx != NULL && cur_ctx != pvp->ctx) {
p = cur_ctx->pvt;
/*
* unload the region from off to the end of the mapping.
*/
cur_dhp = p->dhp;
if ((err = devmap_unload(cur_dhp, off, len)) != 0)
return (err);
}
/* Switch device context - device dependent*/
...
/* Make handle the new current mapping */
cur_ctx = pvp->ctx;
/*
* Disable callbacks and complete the access for the
* mapping that generated this callback.
*/
return (devmap_load(pvp->dhp, off, len, type, rw));
}
SEE ALSO
devmap_access(9E), devmap_contextmgt(9E)
Writing Device Drivers in Oracle Solaris 11.4
Oracle Solaris 11.4 22 Jan 1997 devmap_unload(9F)