svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
ddi_peek(9f)
ddi_peek(9F) Kernel Functions ddi_peek(9F)
NAME
ddi_peek, ddi_peek8, ddi_peek16, ddi_peek32, ddi_peek64, ddi_peekc,
ddi_peeks, ddi_peekl, ddi_peekd - read a value from a location
SYNOPSIS
#include <sys/ddi.h>
#include <sys/sunddi.h>
int ddi_peek8(dev_info_t *dip, int8_t *addr, int8_t *valuep);
int ddi_peek16(dev_info_t *dip, int16_t *addr, int16_t *valuep);
int ddi_peek32(dev_info_t *dip, int32_t *addr, int32_t *valuep);
int ddi_peek64(dev_info_t *dip, int64_t *addr, int64_t *valuep);
INTERFACE LEVEL
Solaris DDI specific (Solaris DDI). The ddi_peekc(), ddi_peeks(),
ddi_peekl(), and ddi_peekd() functions are obsolete. Use, respectively,
ddi_peek8(), ddi_peek16(), ddi_peek32(), and ddi_peek64(), instead.
PARAMETERS
dip A pointer to the device's dev_info structure.
addr Virtual address of the location to be examined.
valuep Pointer to a location to hold the result. If a null pointer
is specified, then the value read from the location will sim‐
ply be discarded.
DESCRIPTION
These routines cautiously attempt to read a value from a specified vir‐
tual address, and return the value to the caller, using the parent
nexus driver to assist in the process where necessary.
If the address is not valid, or the value cannot be read without an
error occurring, an error code is returned.
The routines are most useful when first trying to establish the pres‐
ence of a device on the system in a driver's probe(9E) or attach(9E)
routines.
RETURN VALUES
DDI_SUCCESS The value at the given virtual address was successfully
read, and if valuep is non-null, *valuep will have been
updated.
DDI_FAILURE An error occurred while trying to read the location.
*valuep is unchanged.
CONTEXT
These functions can be called from user, interrupt, or kernel context.
EXAMPLES
Example 1 Checking to see that the status register of a device is
mapped into the kernel address space:
if (ddi_peek8(dip, csr, (int8_t *)0) != DDI_SUCCESS) {
cmn_err(CE_WARN, "Status register not mapped");
return (DDI_FAILURE);
}
Example 2 Reading and logging the device type of a particular device:
int
xx_attach(dev_info_t *dip, ddi_attach_cmd_t cmd)
{
...
/* map device registers */
...
if (ddi_peek32(dip, id_addr, &id_value) != DDI_SUCCESS) {
cmn_err(CE_WARN, "%s%d: cannot read device identifier",
ddi_get_name(dip), ddi_get_instance(dip));
goto failure;
} else
cmn_err(CE_CONT, "!%s%d: device type 0x%x\n",
ddi_get_name(dip), ddi_get_instance(dip), id_value);
...
...
ddi_report_dev(dip);
return (DDI_SUCCESS);
failure:
/* free any resources allocated */
...
return (DDI_FAILURE);
}
SEE ALSO
attach(9E), probe(9E), ddi_poke(9F)
Writing Device Drivers in Oracle Solaris 11.4
NOTES
The functions described in this manual page previously used symbolic
names which specified their data access size; the function names have
been changed so they now specify a fixed-width data size. See the fol‐
lowing table for the new name equivalents:
tab() box; lw(2.75i) lw(2.75i) Previous NameNew Name ddi_peekcddi_peek8
ddi_peeksddi_peek16 ddi_peeklddi_peek32 ddi_peekdddi_peek64
Oracle Solaris 11.4 16 Jan 2006 ddi_peek(9F)